HUANUO Dual Monitor Stand for 13 to 27 Inch, Adjustable Monitor Arms for 2 Monitors with Clamp/Grommet, Dual Monitor Desk Mount for up 22lbs Per Arm

I purchased these to mount my 23" BenQ monitors in my home office. I've had my fair share of cheaply-made over-priced mounting arms before so I was skeptical about the price, but I ended up going with these anyway. They work extremely well. The plastic isn't luxury plastic, sure, but it's not cheap by any stretch of the imagination. Besides, what do you expect for 55 dollars? This is literally more than half the price of comparable products. Additionally, last I checked, no one is planning on beating these things up. You attach it to your desk, mount the screens, and then they're no longer going anywhere. Such a silly thing to complain about. Next, a lot of reviews seems to dislike the cord organization channels. They're perfectly fine. They're snug, but you want them to be snug. You set the cords where they need to go, give yourself enough slack to move around, and then you're set. I had zero issues getting them organized. You can easily fit 4 different cables in each channel if you do two coming in from each entry point. Again, a very silly thing to complain about. Another problem people seem to have is the actual installation. If you're able to read at a 3rd grade level then the instructions are perfectly clear. It's like a 3 step process and it's put together enough out of the box that 99% of semi-competent toddlers could figure it out without the instructions. I can assure you that any review on this page complaining about the instructions or installation process are as incompetent as they come. Installation took 15 minutes from start to finish. Lastly, I see some complaining about not being able to push the monitors perfectly flush against the wall when the desk is against it. That is by far the most ridiculous thing to complain about. Seriously, desk mounts are inherently unable to extend beyond a physical object. How anyone could expect otherwise is mind boggling. In addition to that, the monitors do NOT have to be "right in front of your face." They still have plenty of room. Unless you have reason to believe that these mounts will defy the laws of physics, you won't have any issues either. I love these mounts. The gas pistons are great. Once you get them tuned the right way, they're buttery smooth. I can't believe such a high-quality product is available for such a cheap price. If you're like me and refrain from making these purchases because you insist on getting the right ones, just pull the trigger. They're fantastic. I'll be purchasing another for my desk at work because I love them that much. (P.S. - I love that the arms are independent of each other. You can have one facing the other direction to show someone something without losing use of the other. Love, love, love, love them!)

I have two 27" monitors (Pixio) that I connected to this monitor stand. The stand is study enough to not hurt my desk (Ikea table-top --which I thought would be relatively weak, but is surprisingly durable) and strong enough to hold up both my monitors. I will say though that the up-and-down range of motion is limited and the monitors won't stay fully upright if I move them too much. For moving my monitors from right-to-left motions, this stand works quite well and the placements are stable regardless of where I move the monitors. The set-up is also pretty quick (took me a couple hours to hook both my monitors up and put the wires into the screw-solidified plastic slots. All in all, a good purchase and great for my work-from-home set-up.

I currently have a 27 and 28 inch monitor on this thing, and it holds up alright. I can tell that the 28 is on the very edge of stability because it's a little finicky to adjust just right. It does't seem to drift very much if at all once set. Setup is easy enough. I had a problem with the VESA mount plate on one of my monitors: the mounting area on the monitor is recessed a little and I had to loosen the plate screws to get it on and off the arm, but that's a problem with the monitor. My desk was just the right thickness where I had to use the clamp extension thing plus a block of plastic to make it clamp down firmly (36mm / 1.42"). A little unfortunate but easily resolved. I do however HATE the cable management channels. They screw into place, it is a little awkward to reach, you need a short phillips screwdriver for desk clearance, and they simply don't fit many cables. If you have a monitor with a thick DP cable, an AC power cable, AND a USB cable? Have fun. Extremely frustrating to deal with. You might as well not even bother with the channels and use zip ties.

I was skeptical of this at this price point, but received good sturdy hardware. Clamp or hole mount (I used clamp) and VESA hardware worked well. The VESA plate screws to the monitor, then the plate slides onto end of the mounting arms. Gravity holds while you secure with a thumbscrew. So the monitors are easily mounted and removed! Wires concealed easily. Only small complaint I have is with my monitors, the VESA mount was recessed about 1/4 inch so i could use some shorter standoffs to flush mount the plate. The standoffs are too long for the screws provided, so I'll have to stack some washers or something.

Recently picked up this mount for a 27" Acer Predator monitor and another 24" Predator, this series of monitor is actually quite bulky due it them having a fair amount of internals. I was a little worried after purchasing because I had read of others having issues with the stand not being able to keep the weight of 27" monitors stable and sagging, but this is not the case, arms have held up perfectly and I haven't even had to tighten the pressure at all, which I could still do more. Also the arms actually have more range of motion than I was expecting. Being at the very top end of the size allotments (27") I still have room to have the monitors side by side slightly angled in whatever configuration choose. Construction feels solid and assemble for the clamp layout was simple. At the price point this is a great stand and mount.

i had a small issue with my product but Huanuo support gave me INCREDIBLE SUPPORT !!!! Great Quality products Thanks again and you can buy their product with confidence. I will do business again with them !!!

I work hybrid from home and in-office. Our company has a Teknion contract and all furniture like chairs, desks and monitor stands/arms are sourced from them, and are very high quality. Using their monitor arms and seeing the benefits was good comparison. Teknion products’ cost is also high, but deservedly so. Due to neck strain and posture issues working from home, just relying on my dual monitor setup still resting on their table-top stands, it was time to finally get my own adjustable monitor arms. This set from Huano, if obtained on sale or even during a flash sale, are acceptable. The VESA mount adapters secured successfully to my Dell work monitors. However, as pictured, my monitor has a slight curvature at the back and the mount provision is recessed slightly, so this type monitor of design could cause fitment issues for some, the recessed mount provisions are too deep. The arms are mostly good, instructions were mostly clear, adjustments were okay. One note on adjusting the vertical tension - be prepared to make many turns with the included allen key so the monitor doesn’t keep rising up. A few turns won’t relieve the tension. I had to keep turning my adjusters until they were fully locked and could no longer adjust, and monitors stay in-place at height now. The biggest drawback is the braket on the arm that hooks intoto the VESA mount bracket, securing the whole monitor to the arm - there is a small gap between the plates/brackets, causing a slight play when pivoting the monitor or moving it. It’s not too bad, but is there. Also, as mentioned with my recessed VESA provision monitor design, the top mounting thumb screw has very little clearance from the convex housing. See pictures. Overall, for the price, these will do the job.

I went to print out the invoice for this so I could claim the expense, and after using it for a couple of weeks, I'm shocked it was only $72 CAD. It is exactly what I need. I have a VERY small office and now when I have someone come in to see me, I can just swish these off to the side and speak with them face-to-face. No more fumbling around clunky monitors or standing up so I can see the person sitting across from me. Setup was a breeze and I've had zero issues with hydraulics. I would highly recommend this product.

Pros Cheap-ish Pretty sturdy Easy to assemble - I've never done any of this before, and I was able to figure it out. Took WAY longer than 10 minutes, but I did it! More desk space Cons Very difficult to adjust Doesn't keep adjustments This is an OK dual monitor stand, and my first one. It was easy enough to assemble and attach the monitors to. It is very difficult to adjust, it is not as easy as pulling forward, pushing back, moving side-to-side. There is a little QR code sticker on the arm, definitely watch the video, that answered my question. You have to hold the arm horizontal while loosening the tension. Even after I figured that out, they are still pretty hard to adjust. If I was purchasing for home, I'd return and invest in something better. But since this is for work, it will do.