[initeq] #6-32 Threaded Heat Set Inserts for 3D Printing (100, Long)

No issues, great little threaded inserts with clean threads

Works great. I was able to find the dimensions from a different product  [initeq] Threaded Heat Set Inserts for Plastics Combination (Imperial + Metric) Assortment A 200 Pack . I used .206 in. for the top hole and .185 in. for the bottom hole, with a distance of .250 in. I also extended the .185 in. hole to the length of my screw. For the screw, I used  The Hillman Group 101040 6-32-Inch x 1-1/2-Inch Flat Head Phillips Machine Screw, 100-Pack .I performed a stress test on this after setting it in a test block. I tried tweaking the screw sideways to see if the nut would come loose, but the screw bent. I then attempted to hammer on the screw from the back side (bottom side) of the nut test whether the nut would pop out. The screw bent, but the nut didn't budge. As a final test, I used a wrench to tighten the screw as far as I could. I expected the threads of the nut, being brass, would strip out or the nut would start spinning in the plastic. But... the head of the screw broke. :P I removed the remnants of the screw, and while there was slight damage to the threads, the nut still worked with a new screw without problem.I was a little surprised I was not able to get the nut to even budge in the block. I printed with PLA, 5 layer outlines. I think this certainly helped to retain the nut. To insert the nut, I used my Weller WESD51 set to the lowest heat setting, which is 350 F. I didn't force the nuts in, but allowed the weight of the soldering iron to work the nut into position.The only way these nuts are coming out of the PLA block is with heat. I'm pleasantly impressed with these, and this should allow me to expand the types of projects I can create with my 3D printer. [initeq] Threaded Heat Set Inserts for Plastics Combination (Imperial + Metric) Assortment A 200 PackThe Hillman Group 101040 6-32-Inch x 1-1/2-Inch Flat Head Phillips Machine Screw, 100-Pack

There is not much to see about this other than they work PERFECTLY for my needs... They are MUCH smaller than the picture suggests and they fit all of my existing screws... and if you have 3D prints that need these, they do class up your models with a very professional look.

Quality seems to be as expected.