Auxbeam 5" LED Offroad Lights with Amber DRL, XP-Ultra Series 132W 15600LM Super Bright Square LED Pod & Amber Pod Light Cover, Spot Flood Combo Fog Light Bar for Off-Road Vehicles, 2 Years Warranty

Perfect Upgrade for My Raptor – Great Value and Performance I installed these Auxbeam 3" LED pods on my Ford F-150 Raptor, and I’ve got to say—they exceeded my expectations. The brightness is insane, especially for the price. I went with the amber lenses to help in foggy and dusty conditions, and they make a huge difference when I’m out on trails or driving in bad weather. Installation was pretty easy. The brackets worked well with the Raptor's bumper setup, and the wiring harness made things simple. I adjusted the angle a bit to get the beam pattern just right, and now it throws a wide, clean spread of light without blinding anyone. The lights feel tough and well-built—exactly what you’d want for a truck like the Raptor. I’ve taken them through rain, mud, and some rough terrain, and they’re holding up great. No condensation, no flickering—just solid performance. One of the things I like most is how much more usable light I get in low-visibility situations. Whether I’m driving through a storm or hitting a trail after dark, these lights help me see way better than stock fogs. If you’re looking for an affordable and functional lighting upgrade for your Raptor, I highly recommend these Auxbeams. Great quality, easy install, and they look awesome too.

This is a great set of lights ! 5 inch XP ultra . I installed them on the outside bottom bumper They are very bright ☀️ ☀️ ☀️ they are brighter than the high beams on my truck to give you a gauge. I would use this set as an extra set of high beams only. To bright for regular low beam traffic. Works great for bad weather on a 2 lane road where visibility is poor Supposed to be off-road use only. The only issue I had was I received two different shades of amber lenses with my set from Amazon. I'm not sure if I got a return package from someone else? I reached out to AuxBeam and they responded the same day offering to send me another set of matching lenses. I will update later on when I receive them. I am very happy with the lights. Easy installation. Can't go wrong when you are on a budget. I did wish they had slip on covers instead of the screws.

Good brightness, they tend to be more flood than spot lighting, very good for use as auxiliary lights, they illuminate very well, easy to install and wire to the Auxbeam switch panel, I will definitely buy more of the brand.

Got these lights for my bronco to light up the country roads. They work great and are incredibly bright. They show me all the deer waiting to jump in front of me.

Much better than I expected! Wanted to add some extra lighting to my bike so I could see better at night. These things completed that mission! Extremely bright exactly where I need light to be. Install was not fun- but electrical on a motorcycle never is. The wiring harness was pretty fantastic- plug and play. No needing to strip wires or anything like that. I removed my gas tank, and pulled the electrical panel cover running down the backbone of the bike and was able to run the harness through that- and tucked the remaining wire (there was a lot) into the left side cover. I am very happy with the way fit finish and quality of everything from Auxbeam. Hopefully everything holds up well! Time will tell and I’ll update my review as it does.

First off I love these lights overall. They are very good quality (compared to Rigid or DiodeDynamics) and the kit includes EVERYTHING you will need to install them. The installation process is clean and simple allowing you to make it look professional in the end. Operation on these is a bit odd. It is marketed for DRL and amber blinker but when power is applied to the correct wires both lamps illuminate. I tried this several ways and I must warn you, DO NOT CONNECT THE WHITE AND YELLOW WIRES TO 12V at the same time. This will cause an overload on the circuit and blow your fuse continuously (ask me how I know). I have accepted that the Yellow and White DRL lamps will be on together and it looks great in my opinion. Output is solid and the finish of these pods is top-notch. I expect several years of use out of these.

These are very very bright and good quality, but the instructions are complete crap. If you are mounting these in the a 2nd Gen Tundra you need to make sure brackets are in the bottom holes. You also need to turn the hood or high part of the light housing is on the inside of the vehicle, not oriented on top. You need to rotate the hood 90 degrees to the inside on each side. Finally, be sure and zip tie everything in place because the Tundra fog light housing is garbage and shakes. I'm loving them.

Honestly these were really fun to plug and play with, didn’t take long and they are bright! They come with yellow lens you can install or you have rock them with the clear lights but imo they look better yellow, the remote does have two functions but worth every penny for the brightness these give off. Unfortunately I don’t have any pics or videos of me using them so I can test and upload bc my truck is in the shop. so I just put a pic of my truck and where I placed the lights.

They look nice but they are a bad fit and hard to remove. Surprised they haven’t broken already when being removed not expecting them to last more than s few more uses

المنتج قوي جدا ورائع

Muy buena calidad

Man I was surprised with the brightness. Not as wide as I hoped but still very good. I used it as Pilar or ditch lights. Maybe too big for it but love it. Would highly recommend this for forward facing flood/spot lights. 4 of these would be soooo good

Love these lights easy to install replacing current older spots. Used factory switch not the provide switch as already installed and working. Just took a new feed from an ignition live for the Orange DRLs. Great addition to my Landrover D2, and complement my current LED headlights. Good light spread and bright for night / country lane driving. Will buy again same size 5”. Good instructions if needed. Plug is 12mm 4 pin if you need to use provides switch through fire wall grommet.