Ekopel Bathtub Refinishing Kit - Made in The USA - Odorless Tub and Tile Reglazing - Most Durable Never Peel Tub Paint Coating - Pour On Touch Up Size

I am SO impressed with this product! I had a hideous gold fiberglass tub and surround that wasn’t in the budget to replace. The roll on product was very easy to use and gives an incredible result, but I will give you a few tips: 1. Prep is everything! Fortunately we were completely redoing this bathroom so I didn’t have to worry about the product getting on the floor, but you’re going to want to make sure to cover the entire floor and anything close to the tub (sink, toilet). And scrub/sand better than you’ve ever done in your life! 2. THIN COATS! Roll this stuff as thin as you possibly can to avoid runs and make sure you have enough product to cover the entire area. 3. High-quality foam rollers are essential. I did the first coat with some crappy rollers that ended up getting bits of foam in the finish. I was kind of freaking out, but that leads me to my next tip: 2. This product is surprisingly forgiving! thought I had gotten every trace of silicone off, but after the first coat I noticed there were some areas where it wasn’t taking, in addition to the bits of foam. Don’t fear! You can gently sand between coats on any rough spots, and the second coat will cover beautifully. During the rest of the bathroom reno we ended up accidentally dropping things (screwdrivers, levels) on the tub, and not a scratch in sight! I seriously can’t believe how well this stuff works.

Works great, good for fixing a peeling area from a prior coating. I sanded with 80 grit first, better adhesion to a slightly rough surface. I used 3 coats. A trick to get multiple coats out of 1 batch (not official or planned, but it worked): freeze it after mixing, then thaw and little and refreeze. This slows the epoxy reaction so it can be used for later coats. Ideally you only mix what you need, but freezing is a backup plan.

So when applying make sure to remove any tape you have along any edges. I let mine dry and it chipped away at the edges when getting tape off because the stuff adhered to the tape but the tape didnt adhere to the sides of the tile so it chipped. But if you sand the stuff down to make smooth then repour this kit it is exact same stuff as in any other big kit. You get a can of the stuff with activator. Just make sure also not to mess with it around 5 mins after you pour it or it wont flow out and self level.. but is a great coating, thick shell and will last a while if you dont make it too thin..

GREAT product with detailed videos. But customer support is non-existent. Experienced an isolated problem with the initial application, watched the repair video and followed the repair instructions to the letter. But the problem recurred. Sent a question to the manufacturer and...crickets. I don't blame the product for whatever issue I'm having, I'm just trying to figure out how to fix (for the 2nd time) the issue. But nothing.

wish they made a smaller size so people can use to do refinish on small area as you have to mix the entire proportion to get it to work but what is wanted is half of the bottle as it was used to retouch a area of tub that the paint was flaking off. But is easy to used just remeber for touchup there should be a option to get smaller size bottle

Recommend a high quality foam or bristle brush. We found it difficult to avoid tiny bubbles, even using a high density foam 2-inch roller. Had to sand down a bit to minimize the uneven appearance caused by the bubbles. Ultimately, very pleased with final sppearance of the repair. If you only have a small area to to work on, this is the same as the larger size pour-on of this product. Definitely the way to go since you cannot save unused mixture for later use. The company rep on the phone was extremely helpful! She assured us that, although this is a pour-on product, it can be painted on for a tub repair. Thanks!

I saved a bundle using this product as part of a several part DIY process that included using expansion foam, bondo putty, sanding and taping and ultimately coating with Ekopel. This was to repair a busted plastic shower pan in a rental. How well it holds up remains to be seen but it performed the way I'd hoped upon application and really looks great. Because the product is basically a liquid plastic, I recommend it only for re-coating these types of surfaces and would not necessarily use it on porcelain tubs or sinks. I do not think a plastic coating on porcelain will yield the correct results.

Sanded and cleaned the spot on the tub, it looked great for about 90 days, then it started to peeling off

so easy to use, even Justin Trudeau can handle it.

The product is very small. Probably not enough to do the job I intended for it. I was going to do the tile surround and the tub but this was the only one available. I am glad I purchased two and may be able to do the tub with these. There are no directions in the box and the bottles in the kit do not give information about the amount in the bottles.

Used this product to refinish a 27 year old composite sink that was stained and rough. There was very little instruction with the product except how to mix the two parts. Preparation of the surface, how to apply it, drying time and clean up was all guess work. It is the consistency of too thick paint, is time consuming to apply and difficult to apply evenly. It is a chemical compound, not like paint. Having said that, the end product was better than hoped for. The finish is a gloss enamel and looks great. Eliminated the need to replace sink and counter top. The longevity of the product is yet to be determined. Would definitely use again.

Epoxy clear coat and paint is not proportional so unable to dry evenly on large area. Only for very small area touch ups.

information.only small size for a sink