SainSmart 3D Printer Resin Orange Resin Rapid 3D Printing Resin 405nm General Purpose Photopolymer Curing Resin for 3D LCD MSLA Resin Printer 1000g Orange

I use this in my Longer Orange 10 machine and it's better than the tan stuff that came with the machine. For me this product provides great quality at a good price. I print all kinds of small stuff (figures etc,) that I find on Thingiverse as well as printing larger stuff that I make on 3d cad software. I went through a lot of trial and error and yes there is a learning curve, but if you are willing to watch a bunch of youtube videos you can get over that curve. I would like to think I got over the curve but I'm still learning and yes I still have fails to print and fails to stick, I'm going to say that is my fault when it happens. IMHO the biggest thing is calibrating the machine, I do it before every print and I do not crank down on those screws (the ones that adjust the build plate) too hard, I think there should be a little give.

This resin printed great on my Elegoo Mars. I've used it to print mostly 28mm miniature figures from the Artisan Guild and the Rocket Pig Games Patreons. I only mention the sources of the miniatures to say this, one set is highly detailed, needing multiple supports while the other is support free and a little less detailed. This is important because the resin proved to print both types equally great. It also doesn't have a harsh smell (it still has a hint of a smell but it's not too bad) Also the resin cured under the UV light in less time than the ABS styles of resin I've used in the past. The only issue I ran into was that this resin is quite brittle once dried. You may say that all resins get brittle...well this one seemed to me to be a little more brittle than others I've tried (Anycubic and Elegoo). It's nothing that is a real issue, just an observation to be aware of. Another difference that this resin provided was in it's bottle....the bottle looks to be aluminum and has a "no drip" style lip for pouring, whereas most other resins I've worked with are just in plastic bottles with normal lips. (This is neither good nor bad, just different). I will 100% use this resin in the future again, also I purchased the grey color if that matters.

I am still a beginner to 3D printing in general, but I have used a couple different resins now with varying results. The Sain Smart transparent was very fun to work with from the start. I opened up the package and was impressed with aluminum bottle that the resin come in. I really like these bottles and I plan on cleaning mine out and using it for dyed resin. The lid fits nicely and firmly shuts. I did have an issue trying to open the bottle though. The little pull tab, that pulls open the sealed bottle, was very are to get a grip on (to be fair I do have kind of fat “sausage” fingers) and when I did get a good hold on it, the tab ripped. I ended up having to cut the seal open with a hobby knife.Pouring my first vat of resin, I noticed that there was a lot of bubbles and foaming action. I was a little worried about bubbles forming in my print and I was correct. On the first few levels of my build, there were a lot of bubbles that got trapped in the models. The front of the bottle says, “Shake well before use!” Which is what I did. This was a cause of a lot of the original bubbles I had in my early prints using this resin. Randomly I would find a bubble here and there and the resin had foaming bubbles at the top of my vat continuously. If you are painting the print, which 60% of my prints will be, it's not a big issue. Most of the prints were bubble free.I started using this transparent resin just as is and was very impressed with the final results. Personally I was not able to tell the difference between the prints from this transparent resin and other comparable “clear” resins. After a few prints I stared to use resin dye to color the Sain Smart transparent resin and it accepted it well. TIP: Make sure to mix the dye, I was going for a swirl pattern and I think a print failed because the first layer/s were dye not resin.Overall, I really like this resin and would recommend it to anyone looking for transparent 3D printing resin. The price is great and the bottle is awesome. I am looking forward to trying out other resin colors by Sain Smart.

I am now into my third 1000mg bottle. Great product and works flawlessly in my Elegoo Mars with the standard settings. I normally print small minis and terrain between .03 and .08 layer at 8-9 seconds layer cure. When cured, seems to hold up to dropping OK, as some resins shatter, but stands up well. If you are looking for resin that is more ABS with a slight bend, this is not it, but a great and very sturdy product and I will definitely keep using.

I've used this resin for quite a few prints seems a bit brittle but it is reasonably priced and seems to print detailed enough for me. I will likely be adding some flex 100 to my vat for future prints. Smell isn't terrible there are definitely worse resins but it's not great either. Seems like a good resin for the cost

I have been into FDM 3D printing for some time now and have heard a lot about this company's products. I am now working with a LCD resin printer and wanted to try their resin. I will say I am not disappointed at all. The material comes in a well sealed container and in fact it is an aluminum can where as the other companies use plastic bottles. The color is good and I had successful prints the very first time I used it. I highly recommend the company and this product. Knowing how well this works in my Hieha SQ3 LCD 3D Resin printer I will now order more colors in the very near future.

Poor quality, might be ok if you prime and paint but that remains to be seen with aging and oxidizing print. Already, dye is not properly immulsified, parts that are thin and we're a solid color with other entry level resins are appearing translucent, color uneven. Bottle isn't airtight, you can't shake it (which is important between each use)I am having reactions every since using this specific resin. I have been 3D printing for a while and I have a background in laboratory science so I understand standard safety procedures and have never had a problem but there is something seriously off about this formulation. Through my nitrile gloves that have never had issues across many printers and many brands of resin. This one is causing a rash. Very worrisome. Getting a refund.

Buen producto, una opción de buen precio para la resinas en México ya que es complicado conseguirlas.

Pues funciona muy bien, aunque la siento un poco fragil, aun asi excelente todo.