Elite Series Anti-Vibration 2in. Pivot Risers 1R-AV2SE

Reduced vibrations to a minimal level, and allows longer duration rides without discomfort. This on a Suzuki DR 650, a big single cylinder motorcycle. Product is extremely well made, but a bit difficult to get aligned due to the many planes of adjustment, and limited access to all points of attachment. You will notice a small amount of flex when hitting the steering stops on each side, not enough to cause a problem, but something you can/will adapt to after a few rides.

They installed onto my KLR 650 2009 without to much of a problem! It does require a little bit of work getting the cables to have a little more slack, such as moving the brake line pointing down a bit more and moving the throttle cables to the bottom instead of at the top. If you have some type of handguard like me you'll need to make sure all the cables are going underneath them instead of over them. They definitely provide a bit of vibration help. Haven't been able to test them a bunch yet but the little riding I've had with them definitely helped at the power band where I got the most vibration. You can't feel the fact that the handlebars "move" when you push on them unless you're paying close attention, they feel nice and stiff. The machining quality is great, as they better be for the price. Standing on the bike is definitely more comfortable after installing them, but they do seem to take away from the aggressive off-road stance the default bars give which means they probably aren't for someone looking to ride super hard off-road. Keep in mind that you can't move the bars that far forward if you have any handguards because they will hit the windshield. The position they landed in works great though for both standing and sitting and is quite comfortable.

The risers are nicely made of good materials. Overall, I prefer the feel of the lifted bars, but for me they block the view of the gauge cluster and are just a little too high for the stock lines to stretch comfortably. They do reduce the “vibes” a bit but felt a little flexi to me on the fork. After trying them for a while, I took them off and am more satisfied with the solid feel without them. I would say this is a good quality product and I can recommend it if you need the vibration reduction and your lines have enough play to go a few inches farther or you are willing to source and replace them with longer lines. For me, a higher rise bar would be a better solution

Great product for the money. Gets the bars to a high cr bend height without the cost of new bars, with the added benefit of the anti vibration. No issues

Instead of just simply absorbing some vibration, the rubber grommet has the ability to SPIN all the way around, until the point where your handlebars are CROOKED! They are dangerous and will cause your handlebars to become incredibly crooked while you're riding! DO NOT USE!

Muy bueno calidad

I had some interference issues with the size of the bolt/nut on the bottom of the anti-vibe riser. It would not mount on my 2004 R1150GS without an additional 1" riser to raise the Rox risers up high enough to clear the triple clamp. Clearance issues aside, the Rox risers are well made and have made the ergonomics much better for me. I'm not sure if the anti-vibe is worth the extra expense though. There was some improvement reducing vibration, but it wasn't as dramatic as I had hoped...maybe 25% reduction.

Awesome. Extremely simply install. Just make sure your bars are aligned well before cinching them down, haha. I got mine nice and tight before realizing one side was twisted slightly farther forward than the other. No biggie, definitely user error on that one. These also greatly reduced vibration in the handlebars for me. A huge plus! I will not hesitate to purchase these again if I get a new bike int he future.