DC 12V Car Digital Voltmeter - AIMILAR LED Display Voltage Volt Meter Gauge for Car Motorcycle (Red)

Works just as expected super easy setup

Perfect,was just what I was looking for and works flawlessly. Upgraded the 72' C/K 20 to an alternator with an internal regulatior (also from Amazon) the dash gauge wasn't working before the upgrade. Hooked this directly into the ge fuse panel. Is shows 14.2 volts accurately when running. When you turn on the lights, the blower, the blower the voltage never goes below 13.4. I do recommend this little meter and the blue goes good with old blues paint job. It has lasted, easily mounts with adhesive strip to the dash (no holes) and a great price.

I installed this on my ATV to monitor the electrical system voltage. After installing a new stator, flwheel, and voltage regulator it is nice to see the voltage at all times to make sure everything is running correctly. Easy to install, just solder/connect the positive and negative wire to your battery. I soldered them into a fused accessory port and it measures accurately to the tenth of a volt. I verified with my professional Fluke multimeter. The display updates every couple of seconds. Very bright LEDs are easy to read even in direct sunlight. I would highly recommend.

I bought this to monitor my battery voltage after an alternator went out on my truck. I have another meter that plugs in a cigarette lighter plug and has two USB plugs on it, but it cycles between voltage, current draw on the USB plugs and temperature in Celsius (which I can't change). I only needed the voltage so I went looking for something else. Despite the reviews I saw saying it was too bright, I said "It can't be that bad". Install was fairly easy. Mine did not come with the double side tape but luckily I keep this around my house. The wires were small as others have noted, but workable. Only took me about 30 minutes to install. Display was easy to read even during full daytime light. I work nights so it is dark out when I head in. First night I started the truck I was blasted from the light. Believe me when I say the photos do not do it justice for the brightness. For a week I had to run with it until I could see what I could do. During that time I thought, "Window Tint". Sadly I could not find any lying around the house so I had to pick up some. I purchased 5% tint which is the darkest they had. A bit pricy as I only needed a piece 3/4" x 2". Therefore I did some testing first. I unrolled the tint from the inside to test without actually "opening" the tint. Amazon is moving my pictures around so I put numbers on them. In the picture #1 I show the full display unfiltered. As you can see, it really lights up the dash. In #2 picture is with one layer of the tint just held over the display. Although it is still lighting up the dash part, you can see some diffusion. #3 picture is with two layers of tint held over the display (part of the "1" only has one layer) and you see a bit more diffusion. I liked what I was seeing. So I went ahead and cut a small piece off and attached it. Currently I am only running one layer of tint. As you can see in #4 picture, it did make a huge difference. Unfortunately I can't see the "V" anymore but that's not a big deal. Although I have not driven yet at night, I am sure this will help a lot. If not, I can always add a second layer. I did drive in full daylight today and was still able to read the display with full sun. In all, I would highly recommend this voltage display. I do wish it had some kind of dimmer control or an auto day/night dimmer. If you do get this meter and have the same issue, I would recommend stopping by a local tint shop and see how much they will sell a small 3/4" x 2" piece of tint for. They will probably just give it to you. Otherwise you can pick some up at any auto parts store and save the rest for another day.

Worth the buy good product just follow the instructions I have four separate ones moderating my alternator, two batteries and my amplifier

Muy buena compra, cumple con lo prometido, para mi criterio la luminosidad blanca es perfecta, no es muy fuerte, es la ideal, y funciona perfectamente, para conocer como se encuentra el sistema de carga del alternador y como también como se encuentra la bateria, con solo el piloto o led del indicador original en el tablero del vehículo no es suficiente, y con este Voltimetro se tiene la confianza de mirar como se encuentra el sistema, esperemos que tenga una larga vida de funcionamiento correcto, ya que recién lo instale.

Great product, Easy mount, Bright display, works great on my zero turn to keep a check on my charging system.

I installed the blue one and used it for a few days. It's not too bright at night and you can easily read it in direct sunlight. The problem I had with it is that the only light on my dash that is blue is the high-beams indicator. I kept seeing the blue from the volt meter and thinking my high-beams were on. So I bought the red one. It's brighter than the blue version. At night, looking in the mirror on the back of my sun visor, I can see that the red volt meter makes my face a bit red, the blue didn't make my face blue. The red is easily visible during in direct sunlight, like the blue. Oh, I can see the red one in the reflection of my front and side windows and it's a bit annoying. The reflection of the blue didn't bother me like the red does. I'm going to have to make a little visor for it. I'm keeping the red one because it matches the red ring around the tachometer, and I'm adding a power switch to the dash that has a red light ring. I want to be able to see the battery voltage before, during, and after I crank my car, so plugging this into the fuse box is not an option for me. (Note: The photo I'm attaching shows both the blue and red models. My camera is ancient and takes horrible photos. These volt meters look so much better in person.)

Muy fácil de instalar, hace la medición correcta en general, la luz no es molesta (depende donde lo instales) y se ve bonito yo tengo la retroililuminacion en Liz blanca y se ve bonito