JJC Dedicated Metal Filter Adapter Lens Adapter for Sony ZV-1 II RX100 VII VI RX100M7 RX100M6 for Canon G5X Mark II Installing 52mm UV CPL ND Filter,Includes 52mm Snap-On Lens Cap & Cap Keeper String

Simple and effective. I've seen reviews stating the adhesive doesn't hold. Mine has been in place a few weeks in hot weather and seems absolutely secure. I do believe through cleaning is essential...I use 99.9% pure denatured alcohol.

Fits my RX100 VII, easy to install, and not worried about ever having to remove it if done with care. I haven't had any problems so far with filters attaching and staying attached. It's a worthy upgrade if you want to use filters and/or have the added protection for the OEM lens leaf cover. It doesn't add that much more bulk/width to the camera either, which was my only worry. Also appreciate the affordability. Recommended.

Easy to install and works great

The steel adapter ring is applied to the front of the Sony RX100 (M6 in my case, not sure if it will fit others in the RX100 series) and then you can optionally screw in a 52mm filter (and/or use the lens cap provided). I like the idea of protecting the front of the lens as well as the flimsy "shutter" over the lens when the camera is turned off, by using a UV filter at all times. The fit and finish of the ring is good and it does not block the lens in any way, open or closed or zoomed in/out. The steel adapter ring is held in place flush on the front of the lens by 3M adhesive tape. The manufacturer description here on Amazon (and on the package) says it is "removable and eco friendly" however I'm finding the ring seems to be bonded to the front of the lens now after a few days of being installed. I tried heating it with a hairdryer, and passing a thin string down between the ring and the lens where the adhesive tape is located. I tried prying gently with a plastic tool. I used enough force that I started worrying about damaging the camera and finally gave up. I merely wanted to know if it could be removed, and was also going to test another brand adapter ring, but apparently this one is not coming off. I emailed the manufacturer JJC through their website page for this item but never got a reply about procedure for removing it. If they ever reply, I will update this review. The package does come with a spare 3M sticker if you ever do get it off of there. By the way, when this ring is installed, it adds just over 1/8 inch of thickness (not quite 3/16 inch) to the camera lens. If you add a filter, such as the thinner B&W UV filter, you have a total of just over 1/4 inch extra thickness. It's enough that you may have to get a different camera case or bag. The other brand adapter ring I ordered is called the Lensmate Quick-Change Filter Adapter (get the one for the Mark 6 if you need that one). It's made of plastic and uses sort of a bayonet design to attach the UV filter to the ring installed on the camera (again with 3M adhesive). The Lensmate is just a fraction thinner than the JJC design, and worth a look if you are going to get one of these. If I ever get the JJC off I'll give the Lensmate a try and review separately.

Stayed on during a full weekend in Texas heat 10/10

fits well and hasn't come off yet after several months of use. cap is a decent quality and hasn't broken yet either, only problem is it does add a more noticeable thickness to the camera then i originally expected, but doesn't get in the way of the lens or ergonomics while shooting.

It’s definitely a nice add on. Helps protect the native lens once you get a filter. I wish it was designed to track on the diameter of the lens scope for fitting purposes.

I thought I would try this since it was "removable". It is absolutely impossible to remove once on the lens, can't find any way to remove it. The problem with it is that it partially blocks the flash so don't like it on there but looks like it is now permanent. Update 6-21-19 - Finally had enough, this adaptor blocks the flash causing a shadow so kept trying to remove it. The adhesive likely could hold a 10 ton truck glued to a pole! Was finally able to remove it but broke the camera in the process. The shell on the extension lens came along with it. If you put this on it will block your flash and despite what it says it is nearly impossible to remove it once it is on the camera, would not recommend.

この商品はzv1から使用しています。 ZV-1M2になって内蔵ndが収納されましたがやはり細かな調整ができるレンズ式が使いやすい ということで今回も購入しました。 装着時に出っ張りがなく違和感がないのがとても気に入っています。

Cumple su función, traer otro parche con pegamento por si se llega a despegar. Pero se ve que si se agarra muy bien el 3M

This Filter Adaptor has a quality build, was easy to attach to the camera barrel, and my filters screw onto the thread smoothly. The supplied dust cover is also easy to attach/detach and stays on better than the one on my old camera. I was a little concerned about an earlier review that suggested the 52in filter adaptor may throw a shadow when the flash is used, however in my limited experience with the camera so far, this has not happened when the lens is retracted to its widest zoom setting (which in any case is where I expect it to be when using a small built-in flash). Bottom line: looks good, works well, and great price!

Simple d'installation. Tout est OK.

Lo use en mi Sony RX100 7 fue muy sencillo de pegar y sirve perfecto para poner tus filtros ND, Polarizador, FX etc etc. PEEEERO estorba para las fotos con flash, como el lente se extiende para hacer zoom y ese adaptador mide los 58mm del filtro…. Pues obviamente al tirar el flash se proyecta una sombra en las fotos. Si no sueles usar el flash el adaptador te irá súper bien! De lo contrario no lo compres o terminarás como yo usando un secador de cabello para calentar el pegamento para poder arrancarlo de la cámara y con el miedo de lastimarla jaja al final si lo logré sin daños.