Tyger Auto Fender Flare Compatible with 2009-2018 Dodge Ram 1500; 2019-2024 Classic (Not fit R/T Rebel Warlock), Rough Textured Black Bolt-Riveted Style 4pc | TG-FF8D4147

I bought a truck for $6K and decided to mod it on the cheap. I ordered these fender flares mostly based on price as they were WAY less money than most of the others. I was prepared to be disappointed given the price point but hoped for the best. I was more than pleasantly surprised to find out these were high quality, including the hardware, the instructions were clear and thorough, the install was straightforward and the fit and finish are excellent! I would recommend these to anyone looking to add some quality fender flares to their truck regardless of budget.

Theses flares are a perfect fit. Easy to install took about 1 hour. They look great. I would definitely recommend these. Thanks

These arrived today and I was able to put them on my 2010 Dodge Ram 1500. 4.7L Bighorn in 2 to 3 hours. The instructions are super basic but give enough info to work through the first one and breeze through the others. I was surprised at the installation of them. I was thinking there would be more. And there kinda should be. My honest opinion is, they are worth slightly less then the $125 I paid for them. These literally get held into place just by the screws (and a few of the included ones) that hold the wheel well to the fender and thats it. So the top part doesnt attach in anyway. I was expecting some double sided sticky tape at least. I mean if it works for the plastic rain guards over your windows, why wouldnt it work for these? That just seems like a no brainer to me. AND it would prevent these from rattling against the fenders. Thankfully, the ones I got were molded really close to the fender shapes. So hats off to them for that and the huge box they came shipped in. But there is a little gap here and there and when I tapped the flares, they did rattle a bit even despite the rubber trim they include. If you are frequently driving down gravel roads with washboards, I dont know if they would rattle enough to be heard... I read a review were someone complained about the fake hardware along the top, scratching their paint. I did a test fit on the first one and they will indeed rub on your paint if you're not careful. I put little squares of duct tape on each bolt to prevent any scratching. They really should find a different way to do this. This is an area they could save some money and pass that onto the customer. Some good things. They add enough hareware to get the job done. The clips they add are not close enough to be held on the metal fender, but they add little squares of rubber tape that hold them in place for you. They are plastic but seem to be of a good quality. The finish on them is consistent and look good. I run 33x12.5 mud tires and to my surprise, these actually stick out a bit past the tires. Which is the main reason I bought them in the first place. Hoping now to keep the mud off my side mirrors. Overall not a bad product. A few tweeks with the nuts and bolts and adding a place for some double side tape, even though that would make installation a pain, would push these into the price range the sell at. I shopped around a bit and picked these over the others for the quality. Im glad I paid a little extra because these look really really good on my truck.

Fit well, easy to install. You might want to add a couple drops of superglue behind the rubber seal every couple of inches to help it from peeling back. I had a small issue getting the rubber to stay on while I was installing (middle of winter) I had to use a heat gun to heat up the rubber seal and stretch it straight before I put it on the guards then it stayed.

I like these it makes my truck stand out. It makes a world of difference on a blend color vehicle.

Flares fit great, flares were slightly off the truck ever so slightly. But within 2 days they started to sit flush from the natural formation. Video shows how they sit right after install.

Makes our truck look kool! Fairly easy to get on. 2013 RAM 1500

good fit,,mostly easy install,,rubber gasket install is a little rough...customer service is easy to work with if needed..would recommend and buy from again.

Just installed these fender flares on a 2014 Ram. Being honest, I thought they would be a whole lot harder to install. With some reviews about gapping and as well as the trim installation. I took advice from other reviews and took my time. I know that I can get pretty frustrated with things if they don’t go right so I did these flares in stages. May sound strange but it worked. I installed the trim and bolts on one day, ensuring that I had plenty of time to do it. Again, take your time. The only issue I had was when it came to the corners/bends. The trim didn’t seem to want to stay. A little dab of crazy glue held everything in place. I waited for a warm day (20*c here in Ontario) to do the full install. Again, take your time. While I did the prep work I let the flares warm up on the black tonneau cover. That made ALL the difference. The install went absolutely perfect with zero gaps and nice and fish. These fender flares seem to be of really good quality. They look fantastic on a black Ram. Follow the instructions, give yourself plenty of time and you will NOT be disappointed. A++++++++

I was skeptical to buy these, but quality is great. All the comments about gaps should be taken with a grain of salt. The main Key is HEAT! Let them sit in the sun before you put them on! Then let the truck sit in the sun and it actually gets better. Finally, I used a small clamp and small block of wood to suck it in towards the fender where any soft tapping with my finger revealed it could go in more. Than just loosen and re- tighten those bolts and remove clamp! Perfect! They look great too, not cheap. Just remember you will have to remove the front hemi badges. Use heat gun and fishing line towards badge side. Then attack the rest of the adhesive with badge off. Buy some 2inch double sided 3m tape on here and a small exact to cut around the lettering. I used tape to mark where the badges were before Taking them off, then left tape in Place. THis made lining them back up straight super easy

Little more flimsy then say, bushwhacker. But it’s almost better, if you install correctly, push in while you tighten the bolts/screws. For pretty sung. One was slightly off for a few days. I let off the bolts, pushed and tightened back up. Rock solid. The stripping vs bushwhacker is way better to install.

Follow instructions and install is about 2.5 hours I decided to use the original screws not the ones they supplied only used one in the middle. I just hope it will not rust the screws the fit is nice.

J’ai installé ces passages de roue aujourd’hui, ça a pris environs 2-3h et tout était installé. La description est parfaite pour ce produit et le résultat final est surprenant compte tenue du prix. Je recommande cet item et ce vendeur sans hésiter. Merci