LamicallGooseneck Tablet Holder, Tablet Stand : Flexible Arm Clip Tablet Mount Compatible with iPad Mini Pro Air, Kindle, Switch, Galaxy Tabs, More 4.7-10.5" Devices - Gray

I absolutely love this thing and use it all the time! It makes night-time browsing, watching, or reading SO much easier! I wouldn't recommend it for something that requires a lot of interaction, unless you'll be pairing it with some bluetooth device, as reaching up from bed will quickly tire your arms.The contraption does have some shortcomings, but for the most part they're fundamental issues of engineering something like this. I think the one thing that isn't, is the fact that they use a plastic screw-handle at the base, that according to many reviews is far too easily breakable, and I believe that (though I have not yet broken mine). If you take care not to over-tighten this part, I believe it can live on for a reasonable amount of time, but this is certainly the weakest aspect of the device. I imagine it was done to help keep the price at a reasonable level, especially considering how much metal must already be in it. But personally I'd pay the few bucks more for a sturdier, metal clasp at the base.Another common gripe about this device is that it will constantly slip downward from what you set it to. It's certainly easy to configure it in a way that this happens; that's not a fault of the device, but of the general problem of what you're trying to get it do (I imagine a $200+ device might solve it, but nothing this straight-forward of a solution). If you think of it like an engineer (or simply heed the advice of the accompanying paper), you'll twist it into a bit of an S shape to improve the stability of the form, or a spiral if you've the space. Yes, it'll still slip slightly at first, and yes that uses up some of the available reach, but it's a simple problem of gravity vs torque, and there's no way around the necessity.Yet another common review complaint is that the neck itself may break. Presumably yes, if you continually twist in a single direction, or constantly twist and untwist it, it will break down fairly quickly - after all, it's just a bundle of twisty metal threads, yes? For my part, I try to ensure as long a lifespan as possible by minimizing how often I reform the neck, leaving it in the shape it's in when I remove it so that I don't have to twist it back again the next time; and by first untwisting/bending it back to fully straight before reforming to a new shape. I imagine this is harder to avoid if you take it traveling a lot, however.With all these potential shortcomings, why is this still a five-star review? Because it just does such a great job of what it's made for! It's incredibly satisfying to use, and does exactly what I needed it for! And yes, perhaps it may break after half a year or something. Perhaps even only a quarter-year if I'm as unlucky as some of the other reviewers (though I do anticipate that the techniques above will save me from it being that soon, at least!). But so what? At this price?! I'd gladly consider a $5-10/mo "rental fee" for such a convenient (and now quite indispensable) device, so anything I get beyond a few months is bonus as far as I'm concerned. So if it breaks I'll just buy another one (in fact I may buy a spare in advance just in case).So now you know: yes, the bad reviews are for the most part correct. AND all the good reviews too. It's the best tool for the job (AFAIC), but it might possibly break. So what? It's cheap. And still totally worth it. That's my 2 cents!

I searched the reviews of many table holders before deciding on the Lamicall tablet stand. I was looking for one to attach to the headboard and hold my iPad Air for reading and watching movies in bed. This is a simple and inexpensive solution that seems well made and works well for my purposes. It might not work with iPads or cell phones in thicker protective cases without first removing them from the case. It works however, with the thinner case I use to protect my iPad.Review update:I have reduced my rating because it appears that the tablet holder is going to break at the joint between the two sections of the gooseneck. The connector that attaches the thinner portion of the gooseneck to the thicker section is plastic. It has cracked and is getting more loose with each use. It looks like the two sections will soon separate. This is a good product that works well except for the plastic connector between the thick and thin sections of the gooseneck. An upgrade in that one part to something more durable would change my rating back to 5 stars.Second follow up review:The plastic fitting that connects the two section of the flexible arm failed after about 11 months of use. The failure would have happened much sooner if I had not used a clamp to hold the part together after the plastic fitting began cracking. As i said before, the product fit my needs and is reasonably priced. But I would be willing to pay more for an upgrade to the plastic fitting that would allow the product to last longer.PROBLEM RESOLVEDI was contacted by the manufacturer LamicallDirect who refunded the cost of the original product and replaced it at no cost with a new flexible arm tablet mount. The flexible arm on the new product does not have the plastic fitting that failed in the previous model. It appears to be stronger and should not have the problem with failure. The clamp that mounts the stand and the clamp that holds the tablet have some slight improvements that improve the overall performance of the product. The tablet mount has a wider channel that allows more room for a tablet with a cover which is a nice improvement. I appreciate the concern of the company that appears concerned about customer satisfaction and delivering a quality product. I have revised my overall rating accordingly.

The ooooonly reason I'm writing this review is because I'm actually impressed by this thing. I did a search on Amazon for a 15.6" portable monitor stand & for whatever reason THIS showed up. I saw that it had GREAT reviews & read thru a bunch of them. WELL, when it gets here I'm soooo excited. I open it up, unpacked it, made sure the monitor fit, (it actually did even though it was stretched as far as it would go) & then I clamped it to my desk. Well, I moved the snake part around to where I wanted the monitor to b at & put it in the clamps & THAT'S when I was like, "What? Are you KIDDING me? What a piece of JUNK!". So when I go to my orders section, for sooooome reason, I decide to go thru the description, (that I didn't do before. I bought it cause of the pics posted & the reviews. I knew what it was for). THAT'S when I saw that it's only supposed to support up to 10.5" tablets. I have NO clue WHY this popped up under me search. The product is GREAT. Suuuuuper easy to hook up & holds tightly. If I wanted a stand for a 10.5" tablet I would get this 1 IF the price was lower. I don't understand paying the cost for something to hold a tablet. Like I said, it's a GREAT product, but costs toooooo much. It's well made, but it doesn't need to soooo much force just for a tablet. My monitor is 4.4 lbs & it ALMOST held it. What 10.5" tablet weighs soooo much that you would need this thing that almost hold 4 1/2lbs. I guess if you reeeeeally wanted your tablet to NEVER move & have too much money then get this thing for sure. I just don't see spending THIS much money for something that could b made with a smaller neck & clamp for a 10.5" tablet. In giving it 4 stars oooonly cause they could make JUST a sturdy for $10 cheaper