Front Windshield Washer Nozzles Replacement for Ram, Chrysler, Dodge, Jeep, Washer Spray Nozzle Jet Kit Replaces OEM 4805742AB 5113049AA 5116079AA 5303833AA (Pack of 2)

Was highly skeptical due to the low price, but was amazed at the fit and function. I recommend squeezing the barbs with a pair of pliers several times before installing to make it easier to insert into the hood. The spray pattern is far superior to the factory spray pattern. And yes, the aim is adjustable. I was able to raise it up with the tip of a screwdriver.

My Jeep suddenly stopped spraying on the driver side which was super dangerous when it blocked my vision from road grease or bugs. Installation was super easy and it came with two so I have a spare!

I was a little bit hesitant because of the mixed reviews. I went through and read the reviews that were related to my particular make and model and they were mixed as well. Purchasers either loved them or hated them. I think the issue is quality control. Of the two in the pack once installed, one worked beautifully and sprayed a nice fan in the middle of the windshield on the driver's side however, the one I installed on the passenger side seemed far less powerful and hit much lower. I ran a straight needle into the passenger side sprayer a few times and it seems to work better, not as good as the driver's side but, at least now it hits a little higher onto the windshield. It still does not have as much of a fan spray as the driver's side but I can live with it. I predict if I were to buy another set or two I would get at least one more good sprayer. For 20% of the cost from the dealer replacements or a third of the cost from an auto parts store they work well. You're getting a fan spray as opposed to two straight streams that most of the replacement nozzles offer. I might buy a second set just to try out my theory.

Fits like OEM, bought them for my 2015 Chrysler Town & Country S. Installation was easy and the spray range is amazing. Would buy again when they become old and brittle.

2021 Honda Civic Sport Hatchback. I bought these after buying a pair that had a brass ball-joint tip from eMagTech Store, they did not work at all. Random streams instead of a fan spray pattern. I was hopeful that these would work because in the pictures, it's one piece plastic assembly like OEM... These OTUAYAUTO nozzles ended up being the exact same (I mean EXACT) product as the eMagTech Store ones with the little brass ball tip. However, upon installation, one of them actually sprayed a nice fan pattern, the other one sprays a random useless stream just like the first pair. Very disappointed.

The nozzles are the same style, design, and fit as my factory Dodge (2013 Journey). They are extremely easy to put in, literally just snap into the holes and then you reconnect the water line tubing. If you are even slightly auto tech savvy these are a no brainer and a simple repair/replacement. If not it will take a little thought and work to remove and or re-install tubing especially if replacement tubing is needed but entirely doable without the need to take your car to a shop and pay (usually $50 or more) to have them installed. Unfortunately in my case the water spray from the nozzles are not lined up correctly for my car and windshield. They work, however the water spray is not fanned (1), not even (2), and it doesn't reach the center (or even low center) of my windshield (3) as stock (OEM) nozzles do. (1) Water spray is not fanned means the spray of water is not in a fan shape or spread across the "stream" of water. I'm staying away from the word stream because it is Not a stream of water Nor are windshield spray nozzles supposed to be a stream. They are supposed to be a fan of evenly distributed water across that fan shape so as to cover a wider/larger area of the windshield. Some car's windshield nozzles may spray more of a stream but will still be in a fan shape to help cover and wet down a larger area of the windshield. In any case not being fanned and the spray leaning more towards a stream of water is not necessarily a bad thing as it still provides the same volume of water and the saturation amount may be equally as important as coverage of area (fanning). (2) The water spray not being even refers to the fact that on each nozzle the water spray is not evenly spread across its spray of water. From a nozzle more water comes from different areas of its spray/"stream". As in, one side of the water spray has a larger amount of water coming out than the other portion of that same water spray. (3) The water spray barely gets to the bottom of my windshield and most just squirts my hood or under the windshield wipers. This may be due to the fact that these nozzles cover a very wide range of car makes and models and will fit since the holes they fit in are all the same. However, some makes and models of cars may have their wiper nozzles further or closer to the windshield, than others, meaning the distance from where the nozzles sit to where the hood ends, and windshield begins, may be different. Angle of hood & the angle of the windshield will play a factor but for most, if not all, the vehicles listed that it will fit will all have extremely close/similar specifications. I even tried to move or adjust the nozzles to see if I could manipulate the water spray or move it to hit higher on my windshield but to no avail. The distance from the nozzle to the edge of my hood is 5" (pictured). The distance from the nozzles to the middle of my windshield where the OEM nozzles sprayed, and optimal location, is 24" (pictured). The spray from these nozzles only get to almots16" (pictured) which is too low to get full/best coverage. They are a good value for their money if you are willing to risk a potential less than optimal spray location (maybe yours will work better than mine did). They Do work and they Do spray the windshield but may not do so, well enough, to help properly clean the windshield, as in my case. Only recommendation I could give is that if you have a distance from the nozzle to your hood edge and/or distance from the nozzle to the middle of your windshield similar to mine then you may have the same performance and may want to look at other companies instead, or just eat the cost of an OEM pair from an auto parts store or your car's manufacturer dealership.

These fit my 2015 Ram 1500 perfectly. The spray pattern is slightly different than the original ones but they work just fine and are like 1/10th the price of the OEM Mopar nozzles.

Works great in 2014 ram 1500. Spray pattern and spray height are adjustable with a small screwdriver or paper clip.

Este producto salió peor del parte que estaba intentando de reemplazar

Great product that works just as well as the oem parts. Plus you get two for a fraction of the cost of one from the dealership.

Que son funcionales como los originales

Not recommended

Fáciles de instalar.