SprayMax 2K Epoxy Primer Gray | 2K Primer Automotive | Epoxy Spray Paint for Metal, Aluminum & Steel | Corrosion-Resistant, Fast-Drying, High Adhesion & Professional Grade 12.5 oz

I'm refinishing 30 year old aluminum wheels. I had not seen two part epoxy in a spray can. Very nice design, coverage is very good, the adjustable spray nozzel is very nice, it appears to be a very durable product, dries pretty fast and provided consistent coverage. Adheasion to aluminum is the reason I purchased the product.

I needed an epoxy primer to use on another aluminum stern drive on a boat between the etching primer and the color coat. The last time I did this on a different stern drive I used Alodine, this 2-part epoxy primer, topped with acrylic enamel 1-step paint. It held up well in freshwater boating, but it was apparent that I should have used a better color coat due to some staining. For this project, I used a zinc phosphate etching primer, then this 2-part epoxy primer, then an acrylic lacquer color coat, then an acrylic lacquer clear coat. Every coat was compatible with the previous coat. This stuck well to the zinc phosphate layer, and most importantly, the acrylic lacquer stuck well and had no issues being applied to this 2 part epoxy primer. For those who know paint technology, you realize that selecting the proper kind of coating to keep from having the acrylic lacquer burn through the previous coating and ruin the job is of utmost importance. This 2-part epoxy primer is more than up to the task. Just be sure to follow the directions and apply the color coat between 15 minutes and 12 hours after applying this product. While I do have professional paint application equipment, for smaller jobs like this I prefer to use a quality rattle can process. Without this product, that would not be attainable. Just be sure to understand that the nozzle is adjustable, and it will not be set the way you need it to be set right out of the box.

Really good adhesion to bare metal. The paint went on well but was very dusty. The paint also had a slight texture to it once dry. It sanded smooth very easily and the black topcoat turned out great. It took me 2 can of the primer to do the suspension parts in the pictures and I bought more for the rest of the chasis

I am so glad I made phone calls & researched on the internet how to properly deal with repairing rust & the need to use an epoxy primer when you have to sand bare metal. I had huge rust stains over 40% of my truck roof, and had previously tried to repair it with regular primer, it didn’t last the rainy winter & started rusting through the paint by summer & only spread & got worse! What a mess! I had to sand the entire center of the roof down to bare metal, feathering the huge areas edges , so that it would blend. I used this epoxy primer, the only one that comes in a spray can, thank god it does! It went on pretty smooth, and I was able to coat the whole roof with several coats & even was able to do some rusted spots on my bumper! Looks good, dried over the day & then painted it. The only problem I had was that paint cans drip, so have a shop towel to wipe the sprayer often, or it will get drops on your paint & you may be able to sand them out a little, but you’ll see that in your finished paint job 😬. It works though & just in time that I got it done before several big heavy rain storms. Still looks great & durable, thanks for making an epoxy primer in a spray can, otherwise it wouldn’t have been possible to repair myself! 🤘♥️💁‍♀️🎅

I have this stuff another shot with the same results. I prepped my parts perfectly, gray scotch brite pad, W&G remover, adhesion promoter. Sat in warm water, shook for 2 minutes, mixed it, shook another couple minutes and laid down 1 light followed by 1 medium coat. 70 degrees today and this stuff shot so dry out of the tip. See the pictures of how it laid down. I don't believe the hardener is mixing well with the primer. The coverage is also terrible, there's so much waste, most falls on the ground. This was exactly how my first experience went and I'm not trying this stuff again.

Worked great for a rust repair. Not exactly sure how the bottom "pin" activation works. Is it pressed and released or does it need to be held pressed in? I held it in while shaking it for ~15 minutes then released it to spray. Unfortunately once activated it's a 1x use. Otherwise pretty good for rattle can paint.

A fantastic product.. it's easy to apply, there's a good fan on the spray pattern with no hot spotting. This is primo DTM primer. Buy once cry once nothing adheres like a 2k product.

The spray pattern and the coverage is great..half of the time.. but the nozzle isn't worth the trouble. its sputters horribly. and you get a few seconds of great spray then it gets bad.. Then after half the can is used it is almost unusable. Wouldn't buy again. Disappointed being that the Spraymax 2K clear is PHENOMINAL

As advertised. Worked great, very durable. It left a heavy texture but was easy enough to sand out to prep for the next coat. My only problem is with the cap. I inverted the can to activate the hardener as instructed, but the lid exploded when I pushed on the bottom. I had to activate the hardener with a screwdriver.

Worked as advertised, pricy but very good product

Reçu la canette usagée avec de la peinture dans le couvert de plastique et l'activateur sous la canette était déclencher. Aucun remboursement...