GOFORWILD Lockable RV TV Mount, Full Motion RV Mount for Most 13-43 inch TV, TV Wall Mount for Camper Truck Trailer Marine Boat Motor Home, Max VESA 200x200mm, up to 33LBS, 7021

This is THE rv tv mount to get if you’re looking at all the different options within amazon. I’ve tried a couple that claim to be solid, but none compare to this one. I will admit, my tv is a 32”, so it’s bigger than what the manufacturer recommends, but it’s as solid as a rock and I’m not real sure why they only recommend up to 26”. There are a couple of things that let me know this is actually made for an rv, vs just being rebranded for an rv. First, the screws that mount it to the wall are actually short enough that you don’t have to worry about poking through the backside of your wall (most rv’s have 2” interior walls). Second, the mount sits about 3.25” off the wall when in the lock position, therefore allowing you to have it plugged in without kinking the power cord or cable coming out of the receptacle. Third, the lock actually holds the tv very stable from side to side. Most of the mounts on amazon hold the tv from front to back just fine, but they all fail miserably when holding the tv from slightly swiveling from side to side. This one does all of that with no sweat. I would HIGHLY recommend this mount for all of the above reasons. Just make sure your tv has 100mm vesa mounts, or this will not work!

Used to mount a Samsung 32-inch flat screen. Mount was easy to install, very sturdy. Vertical angle adjustable made it easy to get a comfortable viewing angle. The lockable feature is a plus for locking TV in place while traveling down the road. Bought two of these and used one to replace the TV mount that came with the RV. The mount is also relatively light-weight which is a plus when adding items to a travel trailer. After comparing several different mounts this one was the best choice. Unit comes with all the mounting hardware for attaching to the wall and back of TV.

Mount comes with all necessary hardware to install it. It is helpful to have a ratchet with a 1/2” socket, and an easier-to-use hex drive than the one provided in the box. You will also need a stud finder and an electric drill with a 1/8” bit. Drill the holes where the wall bracket is to be placed only as deep as the length of the mounting bolts. Using a hex wrench, separate the VESA plate from the swing arm assembly and install it independently on the back of your TV. Your television (weight limit 22 lbs.) can easily be attached to the swing arm once your mount is bolted to the wall. The manufacturer even includes a mini bubble level. This mount fits VESA attachment dimensions of 75mm and 100mm. Insure your TV has the correct VESA plate holes on the back so that it can be wall mounted.

Bought for our travel trailer. Works great. Very sturdy and solidly built. Happily recommend to anyone.

Mount easy to install and seems to have a sturdy locking system and easy to move in and out. Just a note, the screws supplied are too long for the Toshiba 32" Fire TV and there were no spacers included in this package. You will need 1/4" plastic spacers or purchase shorter screws. I like the mount but gave it 4 stars because it didn't have everything I needed for the install. Check out this link, it is a little more but has all accessories required. https://www.amazon.com/Lockable-100x100mm-Mounting-Dream-MD2209/dp/B07K9DD2SZ

Used this mount to install a 24" LED TV in my Rockwood Roo. Mount seems to be made of good construction. Comes with everything you need to get it on the wall and the tools to make adjustments, even a mini level. Instructions are easy to understand. The mounting plate has many holes so you are not limited to any one bolt pattern. Locking mechanism is KEY for any mobile application as well. Many angle combinations so you can adjust/tilt as needed. Priced well, would recommend. If i ever decide to get the second TV I'll be ordering another mount.

We mounted the product in the bedroom of our 5th wheel travel trailer. The backer plate for the tv location was sheet metal attached the trailer frame. The enclosed screws were not designed for this purpose, so we substituted #14 x 1 inch sheet metal screws. The mount went up easily and appears to be of very good quality. It has made it down some bumpy roads and is still securely holding the tv. We have no complaints whatsoever. This is a very good product performing as designed. Would buy again.

This is the second purchase for this mount. We are swapping out our old TVs in a 1999 motorhome for flat screens.Only have replaced the front one so far, but the mount works well.We have a Dutch Star, and had to use the mounting box without remodeling it. We just added a piece of plywood approximately the height of the bracket base across the inside of the existing box. We mounted the bracket to it with two brackets we fabricated.The tv is sturdy on this bracket. Love that it locks in place to stow. The unlock is easy with the attached pull strap that hangs down. Centering the tv horizontally was a snap due to the slotted mounting holes on the bracket.