The Original Dual Magnetic Movable Phone Holder and Tablet Mount (Gold)

I returned from a recent camping trip where I tested three Clutchit double-gimbal magnetic holders. Yes, I bought three of them: one to hold my GPS on the dash, and the other two to hold sensor LED lights that I attach above the side and rear doors of my van. Of course the one that holds my GPS unit works fine. The flatter the dash surface the better, but mine even works well on a slightly curved dash surface. And even though I have several times lifted and moved the metal base with the sticky back side, it continues to hold well. There are, however, more permanent sticky tape products that I can apply to the back of the metal base. But for the time being, what came in the box is just fine. As for use with the LED sensor lights, the Clutchit magnet has a very soft, paint-friendly surface applied to it that allows me to attach the Clutchit and LED light to the outside of my van without the worry that it might scratch the paint. I like that the double-gimbal swivel allows me to move the LED sensor lights in just about any direction I need. Now, when something approaches my van within the LED sensor range, the lights will come on. The Clutchit comes with extra metal plates with a sticky back so that you can attach it to multiple locations. That makes it very versatile, and I don't have to go out and buy add-ons. Everything you need for multiple applications is already included. Of course, I don't leave the Clutchit attached to the outside of the van when I'm in transit. It holds onto the metal securely, but I don't know how heavy wind and road bumps will affect it. May someday I'll test it out.

*First of all, magnets will not hurt your phone. There is nothing in a phone that is magnetic for it to affect.* I've had this Clutchit mount for a little over a week, and so far it's spectacular. If anything changes, I will update this review. I am really impressed with the quality of this mount. It's made from aluminum instead of cheap plastic. The joints in the mount are stiff and the magnets are very strong, so it doesn't sag or vibrate to a different position. I followed the directions for installing the 3M adhesive mounting discs, and they are very secure. I needed a mount for my car that didn't have a big gaudy 2" - 3" base to adhere to the dash. The disc for this mount is only about 1 1/2" in diameter and very thin. In my car, there was a useless analog clock in the dash, and that's where I mounted the metal disc. An even thinner (1/16" or less?) metal disc adheres to the back of your phone. I carry an iPhone 11 in an Otterbox, in my pocket, and have absolutely no trouble with the disc on the back of the case. The 3M adhesive mounts are doing a great job, even the one in the car where the outside temperature has been in the 90's everyday. I leave the mount attached in my car, so all I have to do is "stick" my phone to it when I get in. It keeps my phone at the perfect viewing angle, and it's like having a touchscreen nav/stereo in my older car now. One complaint though: MADE IN CHINA. Really Clutchit? Designed in the U.S. but assembled in China? You couldn't have manufactured this in the U.S., sold it at $20 a piece, and still made money? If "made in the U.S.A." Weathertech would have made a small mount like this, I would have purchased it instead.

UPDATE 04/11/19: I reviewed this on March 4th with the heading “SKIP IT - Failure is Iminent” but after having printed my return label and reviewed this product, I received 4 more discs from the company to try out. Same magnets- just to try again. The first five pics are from that review. I decided to give it another shot and maybe it was the pebbled dash. This time, I put it in a different place. I show you the texture pre-application, how it looked initially and how it still looks today- with no problems. While not exactly where I’d have chosen to put it, it works out well. Do I remove it from the sticker? NO. I tried that before even applying the new magnet and got a pinched finger for my effort. Lol. They work wellllll together- I wouldn’t try to part them but I dont need to move it around anyway. AUDI a3 OWNERS: if you have the pebbled dash you see in my pics- don’t go there. But it works QUITE WELL where it is now. Better than expected. Flat much smoother surface. I circled where I put it in pic #6. Maybe it’s the fact that my dash isn’t 100% smooth but I don’t think so. So what’s with these great reviews? If you look at my pictures you’ll see the pattern isn’t 100% smooth, but it’s not ridged. You’ll also see where I first tried to attach the magnet- between the vents where I saw it pictured. Perfect place for it. Didn’t work. I did exactly what it said- cleaned it with the alcohol swab, allowed it to dry and then stuck the magnet there allowing it 24 hours to set before I put the movable part on. Day 1, with magnet between the vents, I went to adjust the angle as soon as I attached it. The second I did, because the adjusting takes a little push, it pulled the magnet right off. Disappointed? Yes. But I had another magnet and figured that just wasn’t the place to put it. Second try/second magnet: I cleaned the area with the second alcohol wipe, the only area I thought I could place it and have it work. On the flattest part - to the left of the pop-up screen but back a little further. I let it set for 24 hours. When I went to put the movable part on it and adjust it? SAME. THING. It pulled the magnet right off. The spot that didn’t work is also pictured. The problem? I took pictures of that too. The movable part is very heavy. I’d say well made except it didn’t work. It’s way WAY too heavy for the thin sticker magnet they give you. I can’t even imagine trying to take the movable part off- all I ever tried to do was adjust the angle and it pulled the thin sticker magnet right off. The stationary magnet is NO MATCH for the heavy movable part that the phone would be attached to. Just see the pictures. My dash’s design (which shouldn’t be a problem- it FEELS smooth!), the size of the sticker magnet vs the size of the heavy piece that you’re supposed to be able to move. I couldn’t even adjust it-let alone have a second stationary magnet somewhere else and move between the two! This is a horrible design. The stationary magnets need to be much thicker, heavier - SOMETHING! The two just *do not* work together.

First of all, I should note that I am not using this in a car so it is not being exposed to hot/cold and bumpy roads. For that purpose, I cannot vouch for its durability, though I imagine it will work perfectly. I am using this mount to suspend an iPad Air 2 from custom designed shelves on my desk. I mounted one thick metal disc on either side of my computer monitors so that I can move the iPad to either side as necessary. I ultimately decided on this magnetic mount for that purpose, it has the best flexibility. I can mount the thick discs anywhere to mount it, but also the mount itself can mount to any metal surface, which makes it great to take into the kitchen for recipes, etc. The mount is very sturdy. In fact, it is one of the most beautifully machined pieces of metal I've ever seen. Most magnetic phone/tablet mounts are plastic and cheap looking with a lot of flex, this is beautifully machined metal and very sturdy. It has no difficulty holding an iPad Air 2 up, with the mount hanging from the bottom of a shelf and angled straight out at two 45 degree angles. It doesn't sag or move at all, which is very impressive considering its relatively small size. I don't know if it'll continue to hold up, but it is great so far. The only issue I have had so far is the adhesive on one of the two thick metal discs that I mounted under my shelf. One of them completely failed, luckily it was as I was re-attaching the iPad to that disc so the iPad was in my hands. The adhesive on those discs is 3M VHB which is incredibly strong stuff, so I am going to chalk it up to user error. The shelves are wood so it is very possible it isn't a fully smooth surface. I ended up taking all the adhesive off and using Gorilla Glue to re-attach it to the shelf. It is so thin that it isn't visible and I'm more than happy to have it permanently attached. The adhesive on the other disc and the adhesive on the back of the iPad are rock solid though, so the failure was definitely my own. I don't know if this mount would hold up anything much larger/heavier than an iPad Air, but I wouldn't hesitate to put any phone or small tablet on it. I'm strongly considering getting one for my car now as well since this worked so well. If you're in the market for a phone/magnet mount with the ultimate flexibility and beautiful design, this is what you want.

The good: The magnetic strength of this product is incredible, and the product itself is constructed very well. Their customer service is also top notch so all around it gets 4 stars The bad: I bought this to adhere to my cars windshield, which means it sees sun. If you live somewhere hot... the adhesive backing pads will fail as they’re not rated to survive high temperatures. In fact, when you receive the product the instructions actually recommend you remove the clutchit system when parking out in the sun to keep it from failing. That’s pretty annoying especially when I’m using it for a cam system that’s to monitor my vehicle while parked. The fix: I ended up removing the adhesive from the plate with a razor blade and goo gone. I washed it off with dawn (or equivalent). Let dry. Wipe clean with alcohol. Then I added some permatex ultra grey to the back of the plate. This stuff is rated for temperatures as high as 500 degrees so this isn’t going to fail in the sun. Make sure you use a decent dab of the ultra grey so the plate has some backing sustenance to it when you push it onto your window. The ultra grey will fan out and spread over the back of the tape. Let it cure for 24 hours before putting the clutchit system back on

Revised Review: Impressed by the Outstanding Service I initially left a review expressing my disappointment with the weak magnet in the CLUTCHIT Dual Magnetic Movable Phone Holder. (You can read below my original review) However, I'm compelled to write this updated review to commend the exceptional customer service provided by the company. A day after my initial review, the company reached out to me and extended a sincere apology, suspecting that I might have received a defective product. This level of attentiveness and responsiveness was truly impressive. They immediately dispatched a replacement unit to me, and within just a few days, I had the new mount in my hands. The dedication to making things right and ensuring customer satisfaction was evident throughout the process. Now, I'm genuinely looking forward to testing out the replacement product. The fact that the company took my concerns seriously and took swift action to rectify the situation speaks volumes about their commitment to their customers. I'm hopeful that this time, the item will work flawlessly, and I'll be able to enjoy the benefits of the CLUTCHIT Dual Magnetic Movable Phone Holder as intended. I'll be sure to provide another update once I've had the chance to use it for few weeks or month. In conclusion, while my initial experience with the product was disappointing, the exceptional service I received from the company has turned the situation around. I want to express my gratitude for their commitment to customer satisfaction and their prompt resolution of the issue. Here's to hoping that the replacement product lives up to my expectations. I'm giving it 5 stars now, and as long as the magnet continues to perform as it does now, the five-star review will stay! Ordinal Review: I purchased CLUTCHIT The Original Dual Magnetic item three months ago, and in the beginning it was great. I really liked it, but now after 3 months about,I have to say, I'm disappointed with its performance. Initially, it seemed promising, but over time, the magnet's strength deteriorated . While driving my phone (Pixel 7 ) constantly tilts down, making it very annoying to use. This product's quality looked very good at the beginning,but now unfortunately does not live up to its initial impression.

I got this to use in the gym. I use it to hold my phone onto the power rack/gym equipment. The Clutchit is surprisingly heavy and solid feeling - it really feels unbreakable. Without exaggeration I think you could drive a truck over it and it would still work. It's extremely strong - both the magnets which resist sliding and movement and the ball joints which are tight enough that the phone won't flop forward or rotate. It's a steal at $20. The main issue for me is that I have an older curved phone (LG-G4) and the mounting plates are flat so I only have the plate loosely tucked behind the cover but it's so strong that it works fine anyway. It replaced a Perchmount, a plastic POS that cracks as soon as you look at it and has a magnet that's too weak to hold the phone in place (i.e. it will flip over or slide with little provocation).

I genuinely love these. I’ve probably bought four. I’ve misplaced one unfortunately, but the others, one side loses its ability to stay where you want it, and it isn’t fixable pointless after that they still work for at least using the magnet but It’s no longer directional or useful for videos or anything like that. I hate when this happens. I have two or three now I think that it happened to some. It happens faster than others, but I forget to get on here and put a review up or get with the company to see if they’ll correct it. I gave it a three cause I would’ve rather given a 2.5 But the magnet is very strong. I love the product in general though just wish I could have one a little longer. They last, it’s just hit and miss. Unfortunately, most people aren’t gonna buy multiples more than likely like I did. They’ll just be turned away from it because of that problem.

偽物っぽいものや安いけど悪そうなもの、この手のお品はかなり選定するのに迷いますがレビューとサクラチェッカーの評価、評判も同様で信頼できたので購入しました。 土台の磁力、本体、信頼度も問題ないです。但し、スマホのMagSafe？の磁力では固定が難しいです。私はケースに磁石を仕込んで車の通常走行では簡単に落ちないようにしてます。

Simplemente perfecto. Este lo había comprado hace años y lo puse en los coches y en mi oficina. Ahora compré este negro porque en aquellos días sólo había plateados y el negro siempre se agotaba. Cuando lo vi de nuevo, no dudé en comprarlo. Trae discos delgados, como para el escritorio o para superficies estándar, y otros gruesos para coches o lugares donde el sol y las temperaturas son altos, como en los autos. Antes colocaba el disco por debajo de la funda del teléfono; ahora la pongo en el exterior. De hecho, se ve muy bien y la adherencia es maravillosa. Con todo y baches, saltos de topes, etc., el teléfono se mantiene. En este caso, un iPhone 14 Pro. Totalmente recomendable.

I use this to hold my phone and record myself at the gym to check my form. It works better than a tripod as it also takes up less space. I've been using it for about 2-3 years and the joints are still stiff but smooth so the holder never sags or moves once set in place. The package also comes with a few magnetic adhesives that stick to a surface. I've always had it on the back of my phone case and it has never fallen off. Overall, it's a fair price for something so small but it does its job in all ways and I have no complaints.

No aguanta el peso de Iphone 11

Great strong phone holder