UV Resin Kit with Light, 60g UV Glue for Bonding & Curing in Seconds - Professional UV Flashlight for Jewelry UV Glue Adhesive, Plastic Welding & Glass/Acrylic Repair - Strong Bonding Craft Resin Set

I felt the need to write my own review of this UV resin to offset the (in my opinion unreasonable) negative reviews. I just bought my second bottle, as the one I've been using for over two years is finally starting to get low, and it's been so wonderful that I don't want to risk running out. Below, I'd like to address a few key points: 1. Usefulness. The photo I attached is of a small (8" tall), clear, light-up Christmas tree decoration, the top 1/2" of which had broken off and gotten lost. I was able to reconstruct it easily by dabbing on a bit of resin at a time and curing it mid-drip to make new branch-tips. You'd never know it had broken. That said, the resin doesn't stick super hard to most things other than itself, so making sure to sand surfaces prior to application--or even better, applying it in such a way that it can flow around part of what you're repairing in order to lock onto it mechanically--is very important. 2. Shelf life. As I said, I've been working with the same open bottle for two years now, and it works just as well as ever. The tree light in the photo was repaired last week, and the resin cured hard and clear like normal. 3. Yellowing. I have never, ever, had issues with yellowing or color distortion with this resin. In contrast, the "clear" UV resin I bought to use with my 3D printer yellows significantly with additional UV exposure, to the point of turning amber after several minutes of post-curing. The same amount of UV exposure makes no perceptible difference in the color of this resin (the one I'm reviewing). 4. Curing. Okay, I think I know why some people are having trouble here. I have a 405 nanometer UV lamp for post-curing 3D printed resin things, and I've found that this resin never cures fully with that light (the surface stays tacky and takes fingerprints). Luckily, I have a 395 nanometer UV flashlight intended for spotting pet urine, and it cures this resin fully and flawlessly. I would never have thought that the exact UV wavelength would make such a difference, but it seems it does. So if you're having trouble getting this resin to cure with a UV light, double check the wavelength. If it's 405nm, try 395nm instead, and see if that helps. (Edit: I found the flashlight's original packaging, and it claims it's "390-410nm", so maybe the broad spectrum makes a difference? Also, I noticed my resin wasn't fully curing with that flashlight anymore, and it turned out that I needed to change the batteries. Unfortunately, the light will continue emitting a purple glow long past the point where it's no longer strong enough to fully cure the resin, so it's something you have to stay cognizant of as you use it.) 5. Bottle size. Really?? Yes, the resin sometimes comes in a bottle of a slightly different size. Sometimes business have to order their containers from multiple different manufacturers depending on availability, and therefore the exact shape and size can vary. That doesn't mean they're trying to cheat you. Shake the wet cat food out of your skull. Did you get the volume of resin advertised? Then there's no problem. smh 6. Storing the container. The bottle is made of opaque black plastic that, as far as I can tell, lets in no light whatsoever. I'll occasionally shine a UV light directly at the bottle to cure any resin drips that have accumulated on the outside to make them easy to clean off, and I've never had it affect the inner contents in any perceptible way. So I guess what I'm saying is that I wouldn't worry about the bottle starting to harden prematurely from incidental light exposure. I'd worry more about extreme temperature fluctuations. Update: I finally ran out of my first bottle and opened the new one. First, I noticed that the bottle was slightly shorter and wider than the previous one, but seems to be of the same volume. The next thing I noticed was a strong herbal smell (not a chemical smell, oddly enough), like something you might whiff at a Traditional Chinese Medicine shop. I don't find it at all off-putting myself, but some might. Beyond that, I can't tell a functional difference between this resin and that of my previous order.

Really good stuff.

So I've tried several brands of UV cure resin, and by far this is my favorite. Even tho it's a little finicky to cure, if the UV light isn't strong enough it won't cure all the way and will be tacky to the touch (tho that can be remedied by just leaving it in the sun for a day), but the results are very worth it since the finish product has a nice solid feel similar to glass (which also means it can be sharp so be careful with sharp looking edges), not to mention it's extremely clear and shiny. Plus while it does have a strong smell, it smells like pine sap so it's not unpleasant unless you don't like the smell of pine. Another thing to keep in mind is that this stuff gives off significantly more heat than any other resin, UV or otherwise, when it's curing so be careful of when you put in it or put it on

Doesn't appear to be a super glue derivative. Doesn't smell like it when heated. Does not dry brittle hard but tacks up fast under the UV lamp. Is sensitive to heat so will soften when exposed to soldering temperatures but works well for fast tacking of jumper wires and small parts to ease PCB assembly.

I’ve no conflict of interest and this review is solely to help public. I bought a glass table where the metal 'boss' had detached from the glass (the resin bond is very strong for vertical forces but can’t hold with horizontal sheer stress). Because it’s a heavy tempered glass slab on three wooden legs, the interface needs to be incredibly strong. After several failed attempts with other glues, this UV kit did the job. Tips for success: 1. Scrape off every bit of the old factory glue first, make sure both surfaces are very clean and use 100% alcohol and razor blade if needed (with extreme caution and special gloves to avoid cuts). 2. Use a liberal amount of resin (thick consistency somewhere between honey and water) in center to ensure no air bubbles, avoid too little or too much of it. 3. Hold it tight while using the UV light, drying time is decent and if you avoid bubbles then appearance would be great. It cured clear and is holding the full weight of the glass perfectly, nice appearance and good value for money. Saved me from throwing away a nice table! I can afford but avoid waste and carbon footprint if it can be avoided. I am a novice so some bubbles are there in photo attached. Finally, please do this on your own risk with protective glass, gloves and maybe mask as odor is high. Better to do this project in open air or open garage avoid direct sunlight till you cure it.

The negatives I keep hearing about it remaining tacky I can attribute in part to people using low powered UV lamps or flashlights. I used a UV flashlight to test it and while it did cure it still felt a bit tacky. I left the flashlight on it for a good 5 mins and it felt less tacky but not tack free. I got a 36W UV lamp and put it in there for a total of 4 mins...the surface was crystal clear, beautifully smooth and completely tack free. I don't know if it made any difference but I also treated it like I would a two part resin where I put the bottle in a container of hot ( not scalding) tap water for about 20 mins to warm it up so it would flow more freely and any bubbles would rise out a little easier. . Winter here is pretty chilly so even if the ambient temperature feels OK it's best to make sure your resin is decently warm. Can't attest to the bottle size if it's in fact a full 120g since I have nothing to compare it to but so far I like this resin and just wish they sold bigger sizes. I will be buying again. I have had a decent amount of experience with two part resins. When I started learning about UV resins I wanted to try it in order to achieve some effects that was very difficult or not possible with regular two part 24 hour resins or even a quick cure will not achieve. The resin does have a smell but it is not overpowering. However, even so wear a respirator and gloves because many people who enjoyed this hobby had to quit because of developing allergies from repeated contact with the resin on their skin of breathing fumes. I don't use this for large projects, mostly to cover up certain objects like stickers or paper because since it can be dried so quickly there is little risk to it saturating the item and deforming it. I tested it on a vinyl sticker I was encapsulating in resin from an inkjet printer and did not coat it or seal it beforehand, the colors did not run or smear. I did leave the sticker to dry overnight in a warm place to make sure it was completely dry. Did some quick experiments of covering inkjet printed paper designed ( small ones ) and there was no running or smearing either. I would still prefer to seal it with Krylon UV Resistant Sealer or Modge Podge but this seems to work great if I need to get something done quickly. As far as appearance it is crystal clear with virtually no bubbles. Any that do show up can be fish out with a needle or popped with a lighter if they are close to the surface like regular resin. Even better is to leave it in a sealed contained ( for the fumes ) to let all the bubbles rise up to make it perfectly bubble free.

So I bought this resin nearly 4 years ago. I had used it a couple of times to do some glueing and casting small lenses for LEDs. The gluing strength was okay, but not amazing. Enough to get the job done in most cases though. However the clarity was great for the lenses. It does really have a good ability to work bubbles out passively (Letting it sit for a bit) or with a little tapping of the mold you have it in before curing. I was able to luckily find some of the test lenses I did when I first got it and I can honestly say that it has done great without yellowing. They are still crystal clear even after 4 years. However that has been inside and not exposed to sunlight. However this resin is not without issues. For one, the biggest thing is the bottle I got had claimed to be 'Non-Toxic...' There is literally not a single resin in existence that is Non-Toxic. And UV resins tend to be worse then regular resins. Some resins can be food safe and such only AFTER curing. But before they are extremely toxic still. And this resin is most definitely Toxic like all other resins are when uncured and most definitely even when cured as there is no certification otherwise. The uncured resin is so fumey that the smell burns my eyes and irratares my throat/nose if used in an enclosed area. And when curing the resin heats up releasing more of these fumes that are guaranteed to be bad to breath. So again that is not okay. The second thing is I had my bottle of resin for 4 years and after being in a temperature controlled environment and away from sunlight/UV the bottle became unusable. It was extremely weird becuase I went to use it the other day and it was still liquid. I put a drop on a cap and hit it with a uv light to make sure it was still able to cure which it did. Then I went to get a touch more and the bottle in that time (2 minutes) went from being liquid to completely gelled and useless. It was not exposed to the UV at all and it didn't heat up so it didn't end up accidentally curing. Some other reaction took place that must of happened triggered by the exposure to the air or perhaps the mechanical action of sqeezing the bottle. Long story short 4/5th of the bottle suddenly became worthless. So don't expect to keep this around for long term storage. I have traditional resins that are 13y old that still work fine. Sometimes they crystallize and you can use warm water to fix them. But warm water didn't help with this UV stuff (Hence why the bottle label is all messed up in the photos.) Again I suggest not expecting a long shelf life from this resin or you'll waste your money. Some considerations: -I found if you use too strong of a UV light the resin cures too quickly which results in Bubbles and/or cracking and clouding. It can also cause the resin to start smoking which again is probably extremely toxic to breath in. -The resin gets HOT when curing. Enough that it can smoke and burn you if you touch it. You want to cure it slowly if you can. In general the slower the better within reason. If using a high powered UV light you should start a far distance away and move it closer to finish the cure. Or hit it in short burst to allow the heat to dissapate. -Uv resin will only cure properly so deep as the UV can only go so far into the plastic. That means if you try and use this for thick cast it might only be solid on the outside. For me up to 5/8in (1.88cm) cured fine but I didn't test deeper. Additionally again if you are trying to cure it thicker then doing it slow is important to stop too much heat from building up. It will also take a longer exposure to the UV as it get weaker the more plastic it needs to pass through. -If you add too much coloring to the resin the Pigment or Dye can Inhibit or stop the ability of the UV to cure the resin. This stuff should always be a bit translucent when using it. Overall excluding the Gelling that happened after long term storage the resin did work great when I first got it. And cured pieces managed to not yellow after 4 years inside. But the nontoxic claim on the bottle I received was unsubstantiated and frankly untrue. It is a decent product if used quickly and with good ventilation. Hopefully this all was useful.

I used this to repair a resin watch band; it bonded quickly when I used the UV light. Seems to be holding well and seems flexible enough to do the job. It's not hard to use - just make sure you follow the directions. The light is rechargeable, so make sure you give it a good charge before you use it the first time. All-in-all, does it what it says it will, decent price for what you get and it works as quick as it says in the description.

A great product to keep at home for many things that might need a fix with a clear resin. This resin cures fast with little odour and hardens solid and clear.. Any household should have this in the drawer with things like elastic bands and Elmer's glue and pins. Excellent product.

I remember when these UV resins and epoxies starting hitting the retail market they were so pricy and you only got a little amount. I recently started some projects that can utilize this stuff and I couldn't believe how much cheap and easily available this stuff is now. So far everything works good 👍 even the little UV curing pen is pretty decent.

Seems to work really well. Quite happy with results, uv light and quantity for the price.

Its good stuff. Dries nice and easy. I recommend it.

I wonder if it’s the same product considering the last reviews are 2+ years old. The product is ok, stinks, cures ok (used for earrings) but it bubbles a lot so I decided to avoid thick application and stick to the brush application only. It’s okay.