TotalBoat Halcyon Water-Based Marine Varnish for Wood - Clear Gloss Quart

I make handcrafted wooden flags and this was my first time using this sealer. I absolutely loved it! Went on easy. I poured a little and rolled it on with a small roller. Dried perfectly and quickly. Was able to add 5 coats without any problems. I used the gloss finish. Added a beautiful touch to the 5 1/2' flag!

I'm most impressed by how forgiving this product was having to work vertically and in the FL heat. It is a great consistency, and I only had to catch some runs in the corners. It dries fast, but you have enough time to work with it. Just make sure you blend intersections while it's wet, and don't go back to something that has dried for more than a minute or two. It was 80+ degrees and a little humid when I did this. I've refinished it once in the 6 years I've had it, and the urethane product I used a couple years ago didn't hold up well at all. I didn't have to sand too aggressively to get it down to the first pic because the finish came right off. Because this door can have character and I found a pretty good stain match, I didn't worry about getting it all off. I made it smooth and stained it with a gel stain, which I recommend for any vertical project. The second pic is one coat of stain that I brushed on and wiped in with a rag. As you can see from that pic, there is still original stain and finish and even different textures that I was hoping this product would correct for me. I wanted a satin finish, so I followed the recommendation of building with gloss coats and doing a satin final coat. I did 4 gloss and 2 final satin coats the next day. Like I said, the FL sun is brutal so I wanted to really protect it, so you may not need 6 coats. I did two final satin coats instead of one just in case I missed a little spot or something; I wanted to make sure no gloss peeked through. My door is 48" wide with a little exterior trim and I think I still have enough out of the gloss bag to do a 5th coat, so the coverage estimates are not exaggerated by any means. NO SANDING NECESSARY!!! I had a little rough spot from brushing over something that was dry-ish, so I hit it lightly with some steel wool once everything was dry and wiped the dust off well before the next coat. This product really is easy to work with, was ready for the second coat within an hour, and really does clean up with soap and water. I couldn't believe my brush was soft and ready to use the second day. I love the final product, and can't wait to see how it holds up.

I used Halcyon Gloss Marine Water-Based Varnish on a cedar fire pit cover that lives outdoors year-round, and I’ve been really impressed with how it’s held up. After a full year of exposure to sun, rain, and everything in between, it still looks like new - no peeling, no cloudiness, and the gloss finish has stayed sharp. Application was about as easy as it gets. It goes on smoothly with no noticeable brush marks, and the water-based formula makes a big difference - no strong odor and cleanup is quick with just soap and water. If you want a durable outdoor finish without the hassle of traditional varnish, this is a great option. I’d definitely use it again.

Excellent product. Applies evenly and dues clearly. Solid water protection in continuous dub and rain environment. Definitely requires multiple coats for continuous outdoor use, of course.

Great product! Dries fast and goes on easily. My only complaint is with the screw on cap, which is why I took one star off. If the product falls over, which is likely given the nature of being in a gusseted pouch, it leaks even if tightened fully. I unfortunately lost most of the product overnight this way. Great product, but the closure needs to be redesigned.

For exterior wood, I usually go for oil finishes because of ****Chemistry**** water and oil do not mix so it repels without doubt. Testing this out to skip the fumes and wait time. Also, hoping for that grain color pop. WATERLOX is still my go to (I believe a hybrid tung oil with a drying accelerant) tested in time for durability on my butcher block counters. But this stuff! I will keep on hand for many reasons.... it dries faster, beautifully, easy to work with, no headache causing fumes! Easy cleanup and can be used indoors as well. The additional fumes of mineral spirits for cleanup and the wait times adds to the chore of many other finishes. See photos for how the water beads up, especially on platforms I should've incorporated a slight grade. I now have to keep a decorative squeegee nearby from my rookie mistake but this product makes swiping puddles easy. TUNG OIL- backstory- I applied two coats 5mo. Ago over cullwood plywood without much prep besides a light sanding. Never got the color to catch my eyes. Applied one coat of halcyon and wow! There it was.... until the 2nd coat. Not sure what happened reverted to what I've seen this coat to do- Dry clear with a very very slight amber tint. If anything, I don't notice the tint on this board. So I'm guessing it thoroughly dried by this point. Noticing from the amount I overbrushed onto my hands, it has some flexibility and is more of a "sit on top" finish with slight penetration on unfinished surfaces. Of course, the bag design is genius, creating little waste. Advice- I applied in thin layers in the shade. Anything more, you will end up trying to brush over globs of gel once it starts curing if not working fast enough. Anther sign it dries too fast to fully penetrate. As for color, if it's not already there, don't get your hopes up. Same preview as if you were to wipe it with a damp rag to see the final outcome. Surprisingly, it did add color over the Cabot clear oil coat on naturally darker wood. Next time, I will let the sun do its magic to darken raw wood before finishing.

Used this for the first time 2 days ago. Applied to exterior wood window frames that get filtered sun to mostly shade. Started at about 55 deg. and finished at about 70 degrees for 4 coats of the amber gloss and 5th coat with the clear satin. It dried to touch within 30 to 40 minutes between coats, brushed on easily and smoothly, and very happy with the finished result. Remains to be seen as to UV protection and durability however so far very happy with this varnish. Odorless, beautiful appearance, no sanding between coats and cleans up nicely with just soap and water. I plan to use it again and highly recommended.

Used this to refinish the rudder and daggerboard on a sunfish sailboat. It worked well but I particularly appreciated the packaging. It's nice not having to deal with traditional paint cans. Its easy to open, pour out what you need, and then reseal. I hope all paint products start using this approach.

Easy to use. No sanding between coats only 1 hour to cure. 1 quart did a 22’ rowing shell with 4 applications. Soap and water clean up

It worked good for what we used it for.