Cat 7 Outdoor Ethernet Cable 200ft (10 RJ45), SFTP Triple Shielded Ethernet Cable Indoor, Bulk Cat7 Cable, High-Speed 10Gbps 600MHz, Direct Burial, Waterproof, UV Resistant, Network, for Router

I ran this Ethernet cable to our garage, which is about 125 ft long. I also used the included RJ45 connectors. The cable is protected by PVC conduit for extra protection in the ground. I compared the speed and latency from the house to the garage and observed no difference in performance. The cable works well and seems reasonably durable. I have enough left over to make some shorter cables.

My review is for the 25' RJ45-terminated version of this cable, $17 at the time of my order. It doesn't seem to be on the same listing (which is now a bulk cable with ends), but it's what I got when I ordered. There's not a lot to say about the cable - it works for my needs at gigabit Ethernet speeds, great for an out-of-the-way run the long way around my home office to a set of shelves I want to connect to the main router in my office. Cat7 should handle 40gbit Ethernet if any devices come out with that spec - I still see none available on the market - but this cable should handle mgig or 10GBase-T as well as any lower speeds. For now I'm using it for a gigabit link to a switch across the room, and it's more than enough for that.

Exactly what I was looking for!

This cable is triple shielded, but it is not Cat 7, not outdoor, not 10Gbps, not 600MHz, not for direct burial, and not weatherproof. This cable can't even be considered Cat 6a as the required components of a Cat 6a (let alone Cat 7) cable are not present. This cable tests fine for DC continuity, but no communication can be established at anything at least above 100ft. I did not try testing at less than 100 ft, and I suspect this could be used to create 3 ft patch cables that work ok at lower speeds, but this cable is JUNK. I should have realized that as I was pulling it in the first place as this cable is far too flexible for a proper solid copper, properly constructed Cat 7 cable of any length. The speed you will achieve with this cable is 0Kbps! If you want a proper cable, the Cat 6a at: https://www.amazon.com/dp/B0DG7XW9VN would be a good choice (tested and works great to 500 ft at 1Gbps - I didn't try faster speeds)

A perfect item yo purchase and use.

Received 3 stars because at 300 ft 23 short advertised max length , cable checks good but does not provide stable signal . Still need addition testing / troubleshooting to narrow down issue.

This product is a 25-foot (7.6-meter) Cat 7 outdoor Ethernet cable labeled as "direct burial" with a waterproof PE jacket. It is a very sturdy and somewhat stiff cable, which is reasonable for outdoor use. The cable comes with RJ45 connectors on each end, as stated on the product page. While Cat 7 cables are officially rated for GG45 or TERA connectors, manufacturers often terminate them with RJ45 for compatibility with older systems. To be clear, this is a Cat 7 cable, but due to the RJ45 connectors, its performance is effectively limited to Cat 6a levels (600 MHz, 10 Gbps). True Cat 7 functionality (1000 MHz, improved EMI shielding) requires GG45 or TERA connectors, which include additional contacts. That said, RJ45 ensures broader compatibility with standard devices, while GG45 or TERA would maximize the shielding and performance in high-interference environments. For durability, if you plan to bury the cable, I recommend using a conduit to protect it from moisture and physical damage. The PVC jacket should last a long time when buried as-is, but using a conduit will extend its longevity and help prevent damage from digging or other hazards. I ran some basic performance tests, and the cable performed well under load. While I don't have a way to inspect the shielding without damaging the cable, if it is shielded as described in the product details, this is as good as you can get for an RJ45-terminated Cat 7 cable. Would I have returned this product after using it? Nope. It is exactly as described on the product page. I specifically needed an RJ45-terminated cable since I don't use GG45 or TERA connectors. I tested it for astrophotography applications, and it worked well. I expect to use it outdoors for a very long time with my telescope, data acquisition, and mount control hardware.

I wanted cat6 that was shielded for a project where I need an AP that has wires run close to a light fixture and the electric in my house is trash. So far this is holding up well. Doesn't seem to be any interference, my network equipment shows excellent signal, no drops etc so I'm happy. The cable itself is a little stiff but it's not an issue for me. Being shielded, it has a bit of a larger terminated end but fit my AP mounted direct to my ceiling without too much fuss.

Absolutely perfect to run from my router downstairs to my pc upstairs back to one gig down and one gig up, am more than happy with this.

The cable with good quality is very convenient to use until now. The magnetic core is made of oxygen-free copper, with minimum noise and interference Space-saving, cleaner installation, running along the wall It's safe. I like this cable

Buen cable, permite 2,5 Ghz y 10G

I've only had this cable a couple of months but it seems to fine so far.

Kabel ist genau so wie beschrieben. Extrem schnelle Lieferung. Passt alles - top!