Dark Walnut 75 x 63 in Corner Standing Desk, DESK-E3CTWD-75

I love this desk! It is sturdy and well-made. As others have mentioned, it is challenging to put together. There is a video you can watch that helps a lot. My take on it is this: the video helps a ton, but it also shows the desk being put together by assembling the frame, then putting the top on with the frame upright. The printed instructions have you assembling the whole thing upside down, then turning it over. Other buyers have said it was really difficult to turn the assembled desk upright, and I can see how that might be the case. But it was hard to attach the top to the frame while lying on my back and keeping my arms up in the air. The assembly took about 3-4 hours. If I had it to do again, I think I'd assemble the whole thing upside down. It is confusing that the printed and the video instructions are at odds. That being said, I am so happy with this desk. The motor mechanism is smooth and quiet. It is a touch slow - but that's ok. Nothing on the desk wobbles or shakes when the desk is being adjusted up or down. The legs are substantial and the seam between the two top pieces are well secured so I don't think there will be any separation of the two parts.

I really like this desk, so much so I bought a second one! It is very sturdy and well made. All the parts fit together with great alignment and the laminate is strong. The single motor is plenty adequate for the heavy computers we have on them and don't sound like they struggle at all lifting or lowering. Instructions are clear and easy to follow but do take your time as there's a lot to do...an automatic screwdriver is recommended versus doing it by hand like I did for the first one. If I could make one recommendation it would be to not assemble upside-down (as I did for the first one per-instructions), then try to flip when its done. That is very awkward and could cause damage. Instead, I assembled right-side-up and it was so much better and safer of an experience. You will have to lay on your back to get the top mounted but its easy...Just wear safety glasses. The only negative is the included cable management...The tabs don't stick even with hard pressure on them when applying being held down for 30 seconds. They just fall off after time...but easy to remedy with something else. Very minor and not worth knocking off a star for such a good product!

After completing the setup of the VIVO Corner Standing Desk, I can safely say the end result is spectacular. To be completely honest, the installation process was quite a significant undertaking and proved to be a major challenge to assemble. It requires a fair amount of time and patience to get everything aligned correctly. However, once assembled, the desk is exactly what I was looking for. It is incredibly spacious, providing a massive amount of surface area that easily accommodates my multiple monitors, gaming consoles, and PC tower without feeling cluttered. The build quality feels sturdy, and the Rustic Brown finish adds a very professional, high-end look to my office. At this stage, I am very pleased with the purchase. I plan to provide an updated review in three months to report on the long-term durability of the motorized components and how the surface holds up to daily use. If you can get past the difficult assembly, this is a top-tier workstation.

I wanted to upgrade my previous L desk to a sit stand variety and I’m very pleased with this one. My general thoughts about the actual product are very positive. It’s very very sturdy, doesn’t feel cheaply made, and it’s nice that it provides different ways to assemble it. I’ve had this desk for a couple weeks and I’m happy to say that it has had zero issues thus far. It raises and lowers smoothly, no hiccups, you can save a sitting and standing position of your choosing, and toggle through a few other settings at your discretion. If you have any monitor arm desk mounts and you’re wondering if the desk can support it, it’s safe to say absolutely yes. I have two separate LX HD ergotron arms, one holding a 24” 16lb cintiq, and the other holding a 27” 10lb S2721Q. The desk holds just fine. They’re not drilled in, just clamped to the edge. The actual desk is so heavy I don’t ever have to worry about it falling over or something and it keeps steady when I move the monitors around. The desktop is surprisingly very durable given the material. The desk came in two separate packages that both arrived super early and within a day or two of each other. All the pieces were there, plus a little baggie of spare screws. Only one part was damaged but it happened to be one of the foot pads. The screw for it broke off the pad part but I was able to hammer it back into the little “socket” with some gorilla glue. Really just a minor inconvenience and has had absolutely no effect on the desk’s performance. My biggest gripe about this product is the instructions. While the instructions were detailed and thorough for each of the three assembly options, they kept switching the perspectives for each darn step (sometimes even had the wrong assembly option too) so it was extremely frustrating and confusing to follow. I ended up starting over two or three times. I didn’t exactly have the best experience, but in hindsight the desk is quite simple to build now that I know how to go about it. One thing to note is you will have to drill some holes yourself. The screws provided are not self tapping. And while I was able to get all the existing holes to line up well enough by keeping all the screws loose before tightening everything, there were quite a few spots that lacked pre drilled holes at all. It seems Vivo makes really great quality products but is horrible at accurate, clear instructions. I also bought a keyboard tray from them and the instructions had a significant discrepancy but the product rocks. If you’re on the fence about whether to get this desk, know that it’s worth every penny. (=

The desk is sturdy and the lift mechanism works well. Assembly was easy and overall it's good value for money. There are two shortcomings: a) Disassembling and re-assembling the desk is unlikely to work (e.g., if you want to get it out of the room). This is because the desktop is screwed in using wood screws. b) The desktop (I got the black one) while it's nice looking just by touching it with clean hands, my fingerprints/smudges are easily seen. Cleaning with a wet cloth also leaves visible marks.

I've had this desk for a few months now. I wanted to wait until I moved to write this review. It survived the move very well, was pretty easy to take apart and put back together the second time. I remember the instructions feeling a little unclear the first time I assembled, but the reviews were helpful (not the video). I did not need a power drill to assemble it. You will definitely need two people to flip it over once you're done assembling it. I flipped it on it's long side first, then all the way over. It's L-shaped, so that helps with the sturdiness. I find it to be quite stable and doesn't shake nearly as much as my last non-L-shaped standing desk. The material for the tabletop is good, not cheap particle board like those little black Ikea tables. I drilled into it a little bit to mount a power bar and it didn't crack or anything. The black shows smudges a bit, but it's not super noticeable overall, just at some flat angles. It's pretty quiet when raising or lowering. The only reason I'd want a more expensive desk is just if I ever wanted more weight to be able to be supported, or I guess a bit longer is a luxury, but I'm not getting close to this one's limits anyway, so I think it's a great value

So far so good no problem whatsoever with the 2 units I bought both Vivo and are solid powerful units high quality materials and easy assembly plus it came straight away and I can see from the wording on the packaging ant instructions that this firm have a personality and really do care about customer satisfaction so if your wondering if you should well I did and I am really happy with mine and trust me I am very fussy and ocd, Fantastic Product

Absolutely perfect. Exceeded my expectations. Tons of room, very sturdy, good quality and great price. I wish it went a bit lower, but I already knew the height when I purchased it. Still 5 stars without a doubt. Even at full height extension it feels sturdy. Very easy to put together. I mounted a cable management rail underneath and power bar to one of the legs and it worked out great. Definitely buy it! Don't think twice. Especially at this price.

The desk came in two parts, one was the three feet, and the other was the top, which is in three pieces to facilitate swapping between the extension being on your left or your right. I was fortunate to get both on the same day. Pros: Legs are well packed, instructions are easy to follow and offer both rotations and different places for the control panel. Wide range of extension (72cm to 118), motor is quiet and stops smoothly to prevent jolts. It's possible to assemble this with one person as it needs to be upside down for you to do so, but between the weight and the shape I recommend that you have at least two to move it. Cons: The bracket around the motor leg bends easily, and ended up that way when getting it out of the box because it was a little too well packed. This was also easily remedied. The grain on the desktop appears to have been poorly oriented for a right side layout as the corner's grain is perpendicular, and there is a tiny gap between the parts that can be seen in certain positions. If your desk is centred the mouse will not touch it so it could be worse. Would I recommend it? For the budget, absolutely, I will be seeing how well it holds up.