ECCPPTowing Mirror by Side Mirror Replacement for 1999-2007 for Ford for F250 for F350 for F450 for F550 Super Duty with Power Heated Smoke Turn Signal Telescopic

I used these to upgrade the towing mirrors on my 2005 Excursion. When removing my old mirrors, I connected a small spool of wire to the in door connector so that when I installed the new mirrors, I could simply pull the harness connector back through the door without removing the speaker. The new mirrors look great, and I can see much better through the new mirrors. The manual folding and extending is at first a little stiff, but should get better through usage. I wish that the signal lights could be brighter thru the smoked glass lenses.

I installed these on my 1999 F250. My truck has the round 4 pin connector. These mirrors have a rectangular connector which has several other pins so that the turn signals, position lights and heated mirrors will work. But the manufactuer included an adapter in the box to convert form my 4 pin to the rectangular connector. My truck wasn't equipped with heated mirrors or turn signals but it's not hard to make them work. All you need is a test light (and the knowledge to use it) you can find the turn signals in the steering column wiring harness or near the headlights.Side note: Be careful probing wires in the steering column. If you probe the airbag wires (usually the thickest wires and usually orange or yellow) you can set off your airbags.But a quick Google search of your year make and model and you can usually find a diagram that will tell you what colors to look for and where to find them.The position lights can be found in the dash right behind the Headlight switch. Also near the headlights in the front.Most heated mirrors are connected to a defrost switch and automatically come on when you push the defrost button. My truck didn't have a defroster either. So you can add a simple switch (available at most parts stores) so you can switch on the heated mirrors too. All you need is 12v to the appropriate wire.And its also easy to figure out which wire on the mirror plug is for each function. I'm not sure why the seller is so lazy as to not post the pin diagram, or at leat include a piece of paper showing what each wire is supposed to do, but again Google is your friend. I found one online in less than a minute. You can too!If you don't care about heat or turn signals, the adapter will have you up and running in minutes.And one more item. Many reviewers have reported the mirror having a small gap once installed. If that's the case they simply didn't tighten the nuts enough. The bolts that extrude from the new mirror are slightly longer than the factory ones. It is easy to have the mirror slightly missalligned where it seems to be tight but only lacks a slight nudge or more tightening and they will continue to tighten. Once they are all the way tight the fit is perfect.These mirrors fold forward and backwards. They also have a much larger fish eye mirror at the bottom than the old style factory ones. And the upper mirror also seems to be a tad larger since it is not curved as much as the old ones.Definetly a reccomend. You'll be glad you got them and your truck will even look newer!

Perfect fit, easy to install, look great, great quality, just don’t over tighten the bolts

The mirrors came well packaged. The mirror glass looks really good. No waviness that others have commented about. I bought the Mirrors with the smoked lenses but the bulbs included were regular incandescent clear lights. I ended up replacing them with amber LED's so that they don't need to be changed as well as they now shine amber rather than clear. Be careful because the way the lenses are removed lends themselves to being broken easily. Another reason to upgrade to LED light bulbs. The install took longer than I had anticipated due some fitment issues and wiring up the lights. I am installing these mirrors onto a 2002 F350 with factory power mirrors. The connector was the flat style so i did not need the adapters that the replacement mirrors came with. What I did find is that the threaded studs did not fit through the holes on the door which prevented the mirrors from sitting flush. I ended up removing all of the studs from the mirrors and turning the flange diameter down on a sander. Once I did this the mirrors fit fine onto the doors. Wiring the lights took several hours as you need to remove various dash parts to get to the factory wires. The kit did not come with a wiring schematic but a quick search on the internet gave both the mirror wire and truck wire schematics. I ended up grounding the black wire to the door and then fished the wires through the door boots. I connected the running lights to a wire on the back of the headlight switch and the blinker wires connected at the turn signal harness at the steering column.

Look great work as if factory good price. Needed to trim foam a bit to get them installed other than that they work great.

Be aware that these will not fit flush without having to alter them in some way. However, this will most certainly compromise the initial design in some way or another. I did not alter mine in any way and just thought I would deal with a little gap (that shouldn't be there in the first place). Well, despite my effort to avoid compromising the design, I had an issue regardless. I was driving on the freeway on my way home from a friend's house and the passenger side mirror FELL OFF! Thankfully, my girlfriend was in the passenger seat and was able to retrieve it as it dangled by the wiring harness banging against my truck! I was cautious to not over-tighten as I am aware that these support bolts can and will snap off, but they were on very snug and definitely weren't going anywhere. Upon further inspection, the posts stripped from inside the actual housing of the mirror mold. I was disappointed to find that the housing was plastic when the OEM is molded metal. The pictures say it all.That being said, the customer service was excellent and took care of the issue for me. Glad I kept the box and packing material to send it back for a refund. I am just disappointed in the product quality. Be cautious.

Works fine with my 2005 f350

Lo recomiendo muy buena calidas

Haven't had them in for long so can't confirm durability but install was easy and they look great seem pretty good

Fit perfect on my 2002 f350. Need to run seperate power for marker lights and heated mirrors if already not equipped.The large main mirror does shake a little bit, but overall decent mirror.

They did not fit the truck. There was additional plastic clips on the mount that would not fit. everything else looked good not sure why all they extra clips were there. I did a return, they claimed since they were in the states and I was in Canada that they could not give me a shipping label (untrue I've got them before) and I would have to pay for return shipping and then they would refund that. It cost $90 for the cheapest return shipping, they refunded $25 and stopped messaging me back. my loss