D8 Hybrid HDD NVMe Enclosure USB 3.2 Gen 2 10Gbps Type C 8Bay USB Storage (Diskless)

Works with OpenMedia Vault, and Windows 11. Haven’t used NVMe sockets, but 3.5” drives work well. I like the tool less drive caddys. Would be nice if they locked in…

Update: TerraMaster finally release a firmware update to fix the duplicate serial number issue. Customer support reached out and offered a discount on repurchasing. After receiving the second unit I flashed the new firmware and the NVME all report correct serial numbers. Unfortunately this is the end of the good news. 1) The firmware flash utility is Windows only. This make updates a pain when using any other software. 2) The system still crashes and resets USB under load when connected with 10Gb/s. In a system that maxes at 5Gb's USB3 it seems to work OK, but I do still see some errors in the Linux log. I only have one 10Gb/s system, a 13th Gen Intel(R) Core(TM) i9-13900H Minisforum MS-01. Neither the USB4 nor the USB3.2 ports are stable. I tried two different USB cables with similar crashes. 3) All drives work fine in a non TerraMaster chassis. 4) The SSDs don't allow trim support using Linux. I know the SSDs themselves support trim, but the D8 hybrid blocks them somehow. Still a one star purchase. Don't trust your data to it. Original review: Two issues made me return this unit, and likely avoid TerraMaster in the future. 1) Any NVME drives connected report the same Serial number as the first one. Sime firmware QA should have easily found this. Their forums are full of people with this issue. 2) Heavy IO writes to the NVME always fail after a time. The NVME were not overheating, the internal controller of the DAS fails. I used 1TB Crucial NVME. 3) Heavy read traffic from all 4 SATA drives causes one or more to go offline with USB errors. A simple Linux "dd" from all drives at once cause failure. I used four 8TB Seagate drives. All drives that had trouble inside this unit were tried in a different system without issue. Don't trust your data to the D8 hybrid, it will crash under load.

Runs 4x24TB HDDs and 4x4TB NVMe drives each running in a RAID-5 setup holding all my precious moments. Although I had a problem at first with the connectivity over USB-C, turns out the port on my server was USB-C 2.0... Switching it to a USB-A 3.2 port opened the flood gates and unleashed an unfathomable power that I can't hold. It basically says "LET 'ER RIP" and I'm now transferring at full network speed over the wire. Great device!

After a week of use, I’m cautiously optimistic. No major issues, the one issue that did pop up was perfectly handled by the device hardware and firmware allowing a quick graceful fix. Will report back later after more use, but for now I recommend it for an affordable but reliable 10Gbps enclosure with both m.2 and SATA support. Why am I optimistic? I’ve already written 16TB to it, via two sustained 48+ hour zfs send. Pretty solid stress tests, I think My configuration: Enclosure set to “Single Disk” (the default , passes through each drive) 4x 16TB WD Red SATA drives (ZFS raidz2) 4x 2TB WD Black m.2 NVME drives (ZFS mirrored pair, special for metadata and < 16kb blocks) Setup - The SATA sleds are tool-less, really nice. No major issues - m.2 was also easy once I checked the manual to see how to access the compartment (remove 2 screws, slide forward) First Boot One of the 4 SATA disks wasn’t being seen by the OS. I checked the helpful LEDs and sure enough one was not lit. Powered it all down, swapped the drive with another in a different bay. Booted up. Same issue with the same drive, different bay. So it’s the drive, not the bay. I knew the drive was functional (and had live data on it) so I swapped it back after first blowing into the connector in case there was dust or something. I also reconnected the tool-less rails, and was really deliberate when sliding in the tray of the problematic drive. Powered up - issue resolved. User error perhaps, but it’s fine now First Week I set up the ZFS pool as described above and immediately started a zfs send | zfs recv to copy an 8TB dataset to the new zpool on the DAS. Performance was as expected Roughly ~24 hours into the send process, I noticed one of the m.2 drives in the mirrored pair had fallen off the system- the OS could no longer see it. Not a good sign. It was mirrored so the pool was still up Then I noticed the drive had actually had a USB reset - so the OS immediately re-detected it, just with a new device name (sdo instead of sdl). I closed the now-stale LUKS volume, reopened it with the newly assigned device name, added the device back to the pool/cleared the error state and the copy gracefully continued, the pool was healthy. Roughly 36 hours later, the whole operation completed successfully. Then I did it all over again, no issues this time So, for now, I’ve decided it might have been a quirk with the USB controller or OS. It might have been some other issue, but I’m not too worried. I haven’t been able to reproduce the issue, and it was handled gracefully by the OS, by ZFS and by the DAS. Everything worked correctly through a spurious failure So, I’m happy. I deducted one star only because of the two quirks described above, even though neither were provably the fault of the device. If it runs for 6-12 months, I’ll add the 5th star Can’t beat the price, the forums are very active with vendor reps and it seems they take support very seriously and provide firmware updates for both “bugs” as well as configuration changes (to disable power saving features if desired, I think, is one example I saw) Value for money: Can’t best this price.

Read the specifications carefully. Only drives in bays 1 and 2 are eligible for hardware RAID. You can't create a hardware RAID 5 array with the 4 physical hard drives. When I try to use TrueNAS to set up Software RAID on the 4 drives, it tells me that I have a duplicate serial numbers on my drives and it won't set up the array properly. I've flashed the firmware on the unit and TrueNAS still won't recognize the 4 drives so this is useless for my purposes.

UPDATED! - Terramaster has been great helping me through this issue I was having. It turns out the unit needed a firmware update. Now all seems to good now. I can't say enough about how great customer service has been with them. Original issue - Purchased in August of 2025 and was working great right of the gate. The unit now disconnects the SSD's randomly. Running on Mac Studio with latest OS version. Seems to be only the SSD's that are dropping connection. I have tried other SSD's and it does the same thing. Currently running 2 Western Digital WD_BLACK 8TB SN850X NVMe and they drop connection randomly as well. The spinning drives all stay connected, so maybe there is something wrong with the controller running the SSD portions.

Update & Regrets from my 3 week of experience: ----- 3 weeks later - I am officially returnining this, I suffered data loss on back up and source drive corruption. * Endurance copy fails very predictably. * Not compatible with - GigaStone NAS 2.5 SSD * Not 100% stable with - WD Red NAS 3.5 HDD in RAID * Not 100% stable with - Leven NVME Leven + 1 died * Not 100% stable with - Leven 2.5 SSD * All the Leven NVMEs i never had any issues from my existing Thunderbolt 3 NVMEx4 bay enclosures (StarTech) * All the SSD i tested outside I dont have issue connecting to a USB-to-SATA adapter * I lost my entire TV show archives. Pros: Quality built plastic enclosure USB 3.2 Gen 2 10Gbps - descent performance First left 2 front loading drive bays can be RAID-0 (Stripe-Set), rest of the drive bay and NVME slots are individuals. Works with 2.5" generic SSD drives. Its a simple USB-C DAS not Cloud based NAS Cons: The Front loading drive locking mechanism is weak design, anyone or a "curious cat" on your table top can be curiously eject the drive bay mechanism. During heavy transfers, the USB-C Lag can be experienced even with USB 3.2 gen 2 protocol cable, but it's very little ... in comparing to Thunderbolt storage, you get what you pay for. Summary: --------------------- --------------------- --------------------- BACK UP YOUR DATA else where!!!!! --------------------- --------------------- --------------------- I really wanted this to work, It seems to fail everytime with endurance copy/transfers in a form of backing up entire archive to/from this DAS deviced, I tried factory cable came with TerraMaster my own Active Thunderbolt 3/4 cable (worked little better but this is not the issue).

Does what it says on the box. Had four HDDs and two NVME drives in it. They all show up and work on my mac. Problem is I wanted it to set up a Raid 5 pool on a mac as a server and didn't realize there wasn't a cheap way of doing software raid on a mac. Not this thing's fault that I didn't do my research.

Build quality is cheap and feels flimsy I paid $500 AU for this I did not feel like I had $500 worth in my hands. The D8 is quite loud and is rattling I have pulled out the drives mounted and unmounted into the casing with the same results the operation I was running on the drive was a butterfly test using HDD scan. The drive is in good condition tested previously.

A great starter multi hard drive environment. The only thing that I would like to see even on this model is the fact of being able to network it. Hard drives are easy to extract and change and update within a matter of minutes it's one of the easiest enclosures that I've used.

L’emplacement pour le NVMe 2 n’est pas ci fonctionnel et manquait le calble de transfert Bien déçu

If you are trying to build a homelab style NAS - do not try to use USB disk enclosures, it will not work. No SMART passthrough. Disk serial numbers do not get passed to the OS correctly, disks are not detected with TrueNAS Core. When virtualized and passed as QEMU SCSI disks the speed is very slow and transfers break all the time. Seemingly works well enough in windows. Have not tried any of the RAID modes.

So far so good. Hard drives can be removed easily and there are no issues accessing data when used in a different enclosure or computer. I like that I can have the first 2 disks in raid1 and the other disks are setup as single disks. Very good product! Excellent customer service! Highly recommended!