Motorcycle Perch Phone Mount, Aluminum (Black)

I bought this for my girlfriend for her birthday and she loves it!!! First, these are MUCH less expensive on Amazon than at the Harley-Davidson shops. Secondly, the security of the way the device connects to the phone gives piece of mind. The magnets are amazingly powerful and will hold tight by itself, the little cogged mount just makes it that much better. The install was VERY easy, everything necessary comes in the kit, including the allen wrenches (good for install, but won't help with removing the torx head bolts on Harleys) The entire set-up took about 3-5 minutes to put on the handlebars and adjust to her preference. The cogged bit was a little tight, but loosening the screw on the back helped with that and did not effect the stability or security of the device. The magnet will surprise you a bit when you first try mounting the phone to it, but once you figure out how to maneuver the thing, it works great. It will hold the phone fine at 70mph, and it is very steady. I would recommend this device to anyone.

Performs perfectly. Used to exclusive use the Ram “x-type” mount for my phone for riding my motorcycle. Saw my buddy low side with this holding his phone and it didn’t even budge. Ordered one the next day! It fit perfectly on my 2017 Harley Bagger and is way easier and faster to place my phone on it Way better than the Ram mount with its stupid rubber retainer thing that breaks all the time. Not to mention it keeps the phone in place without any issues without any additional retaining arrangement. I nearly lost my phone while riding with a Ram mount once when I didn’t use the rubber retainer (luckily it was plugged in and I was able to grab it before it came off the charge cable). Plus the Rokform phone case has a string magnet I can use to stick it to anything metal! Absolutely the best way to mount your phone while riding your scoot. 100% would buy again.

This mount is a little more expensive than some of the others but well worth the money. This this is made of metal very easy to install took me all of 10 mins to mount and is super secure. i got a plastic otter box case so i bought the piece that sticks to the back of the case and once its stuck to the case its not coming off.I like the fact its so simple to get the phone on and off the mount just a twist and unlock plus it has a magnet for extra security. I would highly recommend this mount I was a little skeptical because I have always used the mounts with the rubber straps to hold the phone in place but with this thing they are not needed and I feel really confident that the phone is not going anywhere.

This is a perfect fit for my 2012 HD Street Glide FLHX. I’ve been a loyal RAM mount user for years, right up until I tried a RokForm case and mount system on an exercise bike earlier this year. It’s a solid perch mount system that offers multiple positions that should provide a rider of any height a clear view of the screen, with horizontal of vertical mounting options. I have a somewhat unique situation with the front end suspension on my bike that might be of interest to other prospective buyers. It wasn’t on purpose, but I use Progressive Monotubes for my front suspension. I chose to purchase their “lowered” suspension system, to compliment the low profile look that the rear Legend air suspension system provides. That proved to be a mistake. Coupled with the low profile chrome front wheel, the result is a very stiff, and sometimes jarring ride on rough roads. I’ve lost my phone from other mounts twice. Knowing this company’s mounts are widely used by experienced road and mountain cyclists, I thought I’d give one a try. I’m glad I did! If you’re looking for a “roK-solid” mount with a simple twist lock connect/disconnect, the RokForm is a great choice. Product quality is evident throughout.

I own two Harley Davidson motorcycles. One is a bagger and the other a soft tail. I wanted a phone mount that I felt comfortable that my iPhone 8+ would not be lost or damaged. The mounting of the case to the phone is every bit as good or better than my prior Otter box case. I also purchased the magnet that attaches to the vent louver so I can use it in my car. It truly works great! The system is excellent and my wife wants the same for her Samsung Galaxy phone. The phone cases and other accessories I give the Rokform products 5 stars and nothing less. When I received the first Rokform mount to install on my Electra Glide Ultra Limited I did have a mounting issue. Using the necessary Torx bit I removed the original two attaching bolts and the bracket that Harley Davidson secures the Master Cylinder and Front Brake assembly. The original Harley Davidson installed bolts when I checked protruded about 1/2” to 5/8” through the half bracket and there was a lot of thread to hold the assembly in place on the handlebar. See photo attached. I took the Rokform parts as supplied in the kit and assembled them in my hand using the longer furnished bolts from Rokform. What I found was the bolts supplied by Rokform in the kit extended through the half bracket with barely 3/16” of the bolt protruding and about 4 threads. The bolt used is a standard 1/4 x 20 thread, but utilizes a countersunk head and is finished with a black non-corrosive finish. See attached photos that I sent to Rokform. First photo shows how short the supplied bolts in the Rokform kit were. These if used would have eventually stripped out the attaching aluminum master cylinder and brake assembly leaving an expensive repair. The second picture shows the original bolt length as it was manufactured and how much longer the thread engagement is. I contacted Rokform whom responded back to me very quickly. I explained what I had found and advised I needed two longer bolts of the same thread only longer and with the same black finish that wouldn’t rust. The original person I spoke with forwarded me to a person at Rokform who was a technical person. He and I spoke and I sent in the same photos attached with a few additional. The issue is apparent! Bolts were simply too short. However I spent a week dealing with this guy as he went to the area Harley dealer to attempt to look at new bikes such as mine, and validate my complaint. Why did I bother sending photos?After a week I got tired of waiting and dealing with this guy. I called around to an area fastener supply and asked if they had such a bolt I needed in the correct length. As expected they did and I went there and purchased two. In a day or so I again got contacted by the guy at Rokform who told me he could not verify my issue on any new Harley at the dealership he went to there in California. At this point I was aggravated and told him that I got it resolved by taking my time and going and buying two bolts of the correct length. I also conveyed my disgust with him and this nearly two week long deal to get two longer bolts. He advised he would furnish me longer bolts and in a few days they arrived. In summary I really like the Rokform phone mount. So much so I bought another one for my Harley FatBoy. I haven’t yet installed it as I keep that bike in Florida. however when I do if such a bolt length issue occurs I’ve likely got bolts long enough to adequately secure it. I don’t understand why I had to prove to the guy and he had to validate my complaint. I figured that Rokform would simply furnish me without issues two longer bolts. I truly think for the price of this phone mount kit that multiple length fasteners should be furnished in the kit. I purchased a cup holder made by Kuryakyn that is a perch mount as well and mounts on the opposite handlebar assembly. It came with four sets of fasteners. Two were standard thread and two were metric thread. That cup holder kit was expensive just as this Rokform phone mount and Kuryakyn didn’t go cheap in furnishing you what you could possibly need to mount their product. As I stated I bought a second Rokform mount and will likely by a third as I plan to buy one for my Son to give to him for one of his Harleys. Rokform did come through on the customer service end finally. However I don’t understand why such a simple issue took so many phone calls and discussion. I believe that Rokform thinks that a installer won’t remove the half bracket to install their perch mount such as I did. They believe you will remove one original bolt and then loosely assemble the phone mount using their furnished hardware. I’m an ole guy and have learned to trust no one but God. I’m glad I checked the length of the bolts furnished as had I didn’t they could have pulled the threads out of the aluminum Harley Brake Master Cylinder assembly. I would have then been facing the cost of repair as Rokform wouldn’t for sure. I could have simply just went and gotten the bolts and fixed the issue and said nothing. However I wanted Rokform to know and be aware of the issue. This forum we have to help each other by advising others of possible product issues is excellent. This Rokform Phone mount is an excellent product no question! Just check to be sure the bolts you get to attach your Rokform perch mount design if that’s what you buy, are long enough to adaquately secure it as the original manufacturers bolts. Hope you felt this was worthwhile for you to read.

Easy to install hardware mount. When attaching the Rokform case to mount on bike, I really like the fact that it not only locks into place, it also has a magnetic feature that furthers provides you with a sense of security while riding down the highway. One thing to note, provided screws will only tighten down to a certain depth due to included gaskets that are required. Factory screws from your Harley will be shorter as they don’t require these gaskets. As long as you securely tighten the provided screws, you’ll have nothing to worry about. I’ve been riding with my Rokform for over a month now with zero issues. Not sure what other folks were talking about regarding Rokform messing up their camera lenses. I’ve had no degraded focus issues with my iPhone 12 Max Pro.

I got this because I didn't want to deal with the potential issues from a clamp mount. I have to say that this was super simple to install and all tools needed were included with my bike or the Rokform mount. The all aluminum construction makes me feel confident of the longevity of the mount to outlast my bike and definitely my phone case. I added the vibration dampener and that too was very easy to install with all of the tools included. I cannot recommend this mount enough to anyone looking to mount their phone on their motorcycle. I've used others in the past and either the weak grip/hold or plastic parts never left me confident perch mounting my phone on my bike like this mount.

I have bought these before after seeing them on my buddies bikes - way better than RAM or the clamp style mounts. Ram mounts the prong tips come off even using adhesive, and the retaining rubber band part breaks after a while due to exposure in sunlight/heat. If you have bigger/heavier phone they also tend to flop loosely after a while just like the clamping style mounts. These have a twist lock feature and once twisted on the magnet the adapter you put on your phone holds it solid in place. In fact I put my phone on the side of my dually using that rockform adapter and forgot about phone - drove 3 miles and realized, looked and phone was still on side of the truck lol

Supporto cellulare fantastico, premetto ne ho acquistati un infinaita’ di tutte le marche e prezzo. Io ho un Harley Davidison street glide 2017, si monta con due semplici bulloni , togliendo quelli originali. Il porta cellulare diventa un pezzo della moto bello esteticamente e sicuro. Sono andato in autostrada e non ho avuto problemi .lo consiglio a chi è adatto al montaggio. Posto la foto del vecchio e nuovo

Very strong and good value

I purchased this item to fit a 2002 sportster. Unfortunately the bolts are about 1/4 inch to short and the threads don’t engage the thread on the clutch mount. I would contact the seller to ask them about sending new hardware however there dose not seem to be an option for this. Otherwise the mount looks to be of good quality.

Gran producto, se siente la calidad en todos los sentidos. Lo probé en carretera a mas de 100km/h en un viaje de 400km y no tuvo ningún problema. La instalación es sencilla cuando descubres que piezas van donde y en que orden porque las únicas imágenes de referencia para la instalación son las de la caja.

المنتج هذا رائع جدا انصح به لي اصحاب الدراجة النارية