3D Resin Flex Plate for Anycubic Photon M3| Fula-Flex: Resin Edition | Stainless Steel Magnetic Bed Platform | 170 x 110

The media could not be loaded.  When I saw this, I was skeptical but after using the Fula-Flex build plate I am totally sold. I have found even when being as careful as possible scraping your parts of the bed always affected both the part and the bed. However, after several prints I am amazed with how well this works. The magnetic surface holds the flexible build plate very tightly and the overall surface is perfectly flat - even if you had scraped up your original build plate. It is simple to install, just clean and attach the magnet to your build plate, download and print the spacer (you’ll want to do this before you attach the magnet) and install the spacer the under the z axis sensor and relevel. I had to adjust the bottom UV curing time slightly but after that it prints as good as ever. I do not see any difference in the print quality.Removing your prints is the best part, just a slight flex of the plate and your parts will come right off without damaging even the most delicate areas of your print. I’ve learned to hold the plate with the parts facing up so they don’t fall off – see the video. For parts where the bottom surface is important and / or that have a large flat surface this works so much better than having to use a scraper.The support is great to, I had a few questions, and their staff has been very responsive and knowledgeable.If you are serious about 3d resin printing I highly recommend this!

I rarely write reviews online unless there is an extraordinary positive or negative. Long story short, I had an issue with installation and emailed their customer service. I heard back within a few hours with some sound recommendations. It is because of the extraordinary customer service that I felt compelled to write a positive review. That seems to be a rarity with a lot of companies these days.Ultimately, I discovered that it was user error... Everything works great now! The product itself is worthy of recommendation as well. Being able to remove the fixable plate allows for less cleanup and easier removal of prints from build plate. If there is a size that fits my Qidi iBox Mono, I will be getting another.

When I switched from standard resin to water washable resin I had issues with prints breaking and chipping while trying to remove them from the build plate. I have a flexible plate for my FDM printer and thought, I wish someone would make one for resin. Well, while I was looking for something else I ran across the Fula-Flex resin edition. I thought great, finally someone made one! I ordered right then and there. The installation was easy. I did have to make a small spacer because my printer wouldn't level the plate with the added thickness but it was worth it. You will lose about 2.6 mm of build height, but it's worth it. As of writing this review, I have only used it once but so far I am impressed. The print popped right off the plate after printing. No more chipping or breaking my models. I will say as impressed as I am with the product in my opinion I could be slightly thinner. The magnet is one of those flexible soft magnets. They are usually not too powerful so I am worried about slipping and durability. So far so good. Only time will tell how well it holds up to the abuse from the resin. I hope they continue to improve the product since it is fairly new product. The price is about right for the quality of the product. I plan to explore other products made by them.

I bought this to alleviate the issues of having prints that are very hard to remove. Well I can say the magnet on this is strong and seems to work well, but the stainless steel plate is very smooth and things do not stick to it. On one side I tried the sand paper trick to roughen up the surface and it helped some, but 3 out of 4 prints still fail. They also do not sell extra plates on their own so pretty useless on that front too. They really need to have etched plates like the main one, but as a removable plate.

Haven't had it long enough to say anything about the adhesive backed magnet but no issues with some 50hrs of printing.One thing of note is that there is only a small margin of clearance for the little tab on the plate to fit in the tank. For me it was ensuring the tab is pointing towards the back of the tank, otherwise it catches the inner lip. This could lead to damage but I do not see how to design around it, not having a tab would make removing the spring plate more difficult. Perhaps making it shorter and wider in future revisions would help.Leveling was easy, due to the spring loaded build assembly on the Mars 2p, no spacer is required. Just level the bed raise it up, attach the flex plate, and re-level. Easy, done.As far as the other reported issue of the logo being printed to the models, I have not seen this myself. I do typically print with skids or raised supports, and generally the build plate is the bottom of the model so I wouldn't care if it had a bit a print on it. Have not seen the logo on the bottom of the skids myself. It appears laser etched, and is smooth to the touch with the rest of the plate, your experience may vary.I use alcohol to clean and would not recommend immersing the magnet in a solution of any kind, as is typical in the cleaning units. It would likely cause more rapid wear on the adhesive.So in summary,Pros+ Works as advertised.+ Simple installation.Cons-Limited clearance with the grab tab requires attention to plate orientation prior to printing.