Ultra Bright XM-L2 LED Bulb 1 Mode 1200Lumens Bright Drop-in P60 Design Module Flashlight Repair Parts Torch Replacement Bulb for Surefire Hugsby C2 G2 Z2 6P 9P G3 S3 D2 Ultrafire 501B 502B

After removing the big spring (it wiggles off) the module just dropped into my 6P and worked a treat. I needed the led unit because I was moving over to rechargeable batteries and apparently the voltage is too high for the incandescent bulb. Lovely super bright light and a rejuvenation for the old classic.

Purchased as Replacement for Original bulb in my surefire 6p, Did a little checking, & decided to risk rechargeable Batteries, Not only does it work, But the light output is Fantastically Bright, It may reduce Lifetime of bulb, But already Well worth it, With Performance, and saving on lithium Batteries.

Looks good but doesn’t work with the Pelican M6 as stated.

Purchased for my XP-1 Trooper after seeing a review that it fits. Saved me from buying a new torch. Much more brighter and reasonable priced.

despite the ad saying this item would work with the surefire E1E elite, ry removing the rear spring. That is not the case as the body is too large to fit

Did not well. I could not screw bezel on fully (but enough to seal) I modified it by turning 5mm off the front & shortening the spring. It is now better. You get 1hr high output. Then 1 hour good usable output. Then 1 hour very low light (map reading) Torch gets very hot after 30 minutes with fresh batteries.

Wanted an upgrade for my surefire and bought this as its advertised as a direct replacement. The design means it doesn’t connect in the correct places and doesn’t work.

Looks like the springs are too big for the torch, isn’t working. There is no option to contact the seller either.

Es todo lo que esperaba muy bueno

I've had my 9P for over 25 years and it has seen much use and abuse but being a SureFire, it never skipped a beat no matter what was thrown at it. 2 years ago the last lamp I had gave out and I decided to retire it but kept it for sentimental reasons. By chance I came across the BESTSUN XM-L2 LED assembly at thought I'd give it a shot. It is worth every cent of its price and the 9P is back in action again! Being an LED, I think battery life may be extended when compared to the original SureFire lamp but it's too early to say. I read some SureFire owners repoer the lamp doesn't fit properly or you cannot screw the bezel fully with the BESTSUN. I experienced this too but realised I had to remove the outer spring and it fit perfectly. There is a note on the page in one of the pics that says to remove this outer spring but I didn't see it till after, so SureFire owners, hope this info helps.

In the process of upgrading all my weapon lights. I have a 1187 with the Surfire 620T forend from the 1990s with the P60 incandescent bulb cranking out a whopping 80 Lumens or so. Definitely needed an upgrade! Couldn't really find what I needed on Malkoff's website and would rather not spend the $175 for the Surfire replacement lamp right now. For $15, I figured this was worth a shot. While the new unit doesn't fit exactly like the P60 unit does, it does fit and throws out a very acceptable bright beam with a nice hot spot and plenty of flood (especially for $15). Doesn't seem as bright as my Streamlight 1000 Lumen lights, but certainly brighter than my 600 Lumen units and light years beyond the P60. Now the only question is how it will hold up to the battering of the 12 GA? I give it 5 stars with the following caveats: 1) It cost like $15. I don't expect $15 of Chinesium LED technology to surpass a $100+ Streamlight (even though it is also made in China), and 2) It will hold up to the recoil and not drain my batteries while sitting in the safe. If the lens fails on me, I will re-evaluate my rating.

Works very well and produces a very bright smooth beam that is a bit tighter focused than a factory Surefire bulb. I had to remove the big spring for it to fit my Surefire 6P and G2 but aside from this the product works as advetised. Great value for the money.

Have purchased enough of these P60-style LED modules over the years, and these Bestsun Cree XM-L2s are prolly the best so far. Formerly these replacement LED modules required some fiddling, turning the reflector in/out of LED body to achieve a solid fit. Other than removing large spring, this module fits my Surefire 6Ps and G2Z Nitrolon Combat lights (circa 2007) no fiddling, no problems. Color temp is fairly neutral, and the XM-L2 is bright, with generous spillover from its polished reflector. The photo depicts a couple older LED modules failing due to age, and an OEM P60 module for comparison, with new batteries in all four lights. Can't speak to the advertised 1200 lumens, but the module is bright, and compared to other lights I have, estimate lumen output between 600-1000 lm. Also, cannot speak to run-time efficiency, as am switching to 16650s from CR123s. Because these modules are a surefit for my Surefires, ordered modules for the other three lights. UPDATE: So, these Bestsun XM-L2 mods are power hogs with CR123s. Am achieving runtimes only slightly better than OEM P60 Xenon lamps. They are bright, but not the 1200 lm as advertised. With a single 16650 (3.7V) there is a decrement in luminosity compared to series 123s (6V), to about an estimated 600 lm, however, runtimes with 16650s are vastly improved. Where P60 Xenon runtimes could be measured in minutes, this Cree/16650 2000mAh combo lasted all weekend. Could not imagine this kind of performance when I bought these Surefires 15 years ago.