Consciot Bathroom Exhaust Fan with Light, 110/160 CFM Adjustable, 0.8/1.0 Sone, suitable for mounting hole 11.39 x 10.42 inches, Bath Ventilation Fan with 1500Lm LED Light 3CCT Selectable & Nightlight

Moves some serious air for last nights serious super. Very quite on high. MUST USE 6” HOSE. The light is very bright and can change color temp to warm or whatever. I got a switch that has humidity sensing and a light so there is no forgetting when your in the shower. Too bad it don’t work on smells.

This exhaust fan is excellent! The light is amazingly bright, and I love that it comes with a night light feature for softer lighting when needed. Once the cutout is made, the installation is straightforward and quick. The fan runs extremely quietly, and the adjustable settings are a nice touch. Also I installed this in my laundry room but overall, it’s a great upgrade for any bathroom as well.

This fan and light work great!! The fan is super quiet and the functions of switching the fan speed and different lights work well. It is night and day from our other fan, this works so well that the mirror doesn’t even get steamed up anymore in our very small bathroom. My only note is that the installation was a little hard. My husband is very handy, but even he struggled a little. You will probably need to buy a new exhaust hose - this needs a bigger one than is common for most residential fans. It also didn’t quite fit how the other one did, so he had to improvise a bit.

I initially had no fan in the master bathroom (don't ask me why I bought the house like that!) so decided to install an exhaust fan after constant shall I say encouragement from my lady... Initially installed a 90CFM fan and it was junk. Installed this one and works like a champ. Installation pretty straight forward but you will need to get the reducer unless you run 6" ducts outside to vent. The nightlight is a nice feature. Fan works very good and is pretty quite. So far very pleased with this purchase.

Installation is a bit wonky. I had to finagle and make it work because this unit was twice the size of my original unit, but, I will say this thing is amazing. The 160 CFM makes air circulate in the bathroom. Yes it's that strong. No foggy mirror or condensation on the walls or counter tops after steamy showers. If you have a mold problem, this is your first step to stopping it in it's tracks. Even the noise level was low compared to my old unit that was half the size. Works as described. Looks good too.

This fan light is bright and efficient. It is Installed in my tub/shower. Removes the humidity well (my mirror has never fogged up!). Sound of fan is quieter than expected. Very happy with this product.

SEE EDIT BELOW review changed from 3 to 1 stars ----------------------------------------- If I read the specs and looked in my attic before hand, I'd known that I my current duct is only 4" so I need either a new duct with reducer or just a reducer to my 4" duct. My hardware store didn't have the reducer. This kind of put a damper on my mood (frustration) because I wasted a trip to the hardware store and so I had to order online, delaying the completion of my installation. I suspect you may have a 4" already in yours too. This never even crossed my mind since when I replaced the fixture in my guest bathroom, I was able to use the same ducting. It's nice that they have plastic wire connectors that let you just push a wire in. BUT, it would have been nice if they included a harness to daisy chain. In the installation video you only see them connect one pair of wires before they push it back into the fan housing. So what I ended up doing was removing those plastic wire connectors and using wing nuts so I could pair the fan and light to a single switch. It would be extremely cheap to do have included a daisy chain (or simply 2 bridge wires and then using 3 wire connectors rather than 2 wire connectors) . But if they don't want to spent another 20 cents on convenience. Then simply don't install the plastic wire connectors default. Cause it took a couple of minutes to remove them vs seconds to install them. If you don't have a double switch already then this is not an issue for you. Generally speaking the installation is not hard. Removing the old fan was probably the hardest part of the installation. But because of the ducting size issue and wiring configuration, it was not as quick of a project that I had hoped from the start. Also, if you think you'll be able to install this without going up into the attic, then you probably have a newer bathroom fixture. For me, it was not possible to remove the old fan and disconnect the wiring without going up there. Depending on the time of year this may or may not be as bad for you. For me, it's winter and it was "only" 80 up there. But always feels worse because of the balancing act you play standing on 2x4 trusses while trying not to fall through the drywall. Will update when my ducting comes so I can complete the installation. [edit] I don't know how I went so long without noticing this. But apparently, the light temperature changes every time you turn off and on the light, EVEN THOUGH there's a physical dip switch that's supposed to set the temperature (color). I would NOT buy this again. I wanted to love this because of price and how quiet it is! But this is ridiculous. Changed from 3 stars to 1. Their support replied to me "I would like to clarify that the extra switch is not used to control the color temperature of the light. The color temperature can only be preset using the toggle switch on the back of the fan, where you can set it to 3000K (warm white), 4000K (bright white), or 5000K (daylight)." "If you can only use one switch, and have trouble when changing between the night light and the main light, please turn off the light from the mode you need, and leave it off for at least 5 minutes before turning it on again. This way, the light will remember the current mode and return to it the next time you switch it on." Their second message contradicts the first.

Great product. I had to get a 6 inch to 4 inch adapter in order to meet up to our 4 inch h exhaust vent. The hole was also too small from our existing fan so I had to cut it bigger. The suction is amazing. Great airflow while also being quiet