CREALITY PETG Filament 1.75mm 3D Printer Filament, 1kg (2.2lb) Neatly Wound Spool, Dimensional Accuracy ±0.03mm, Fit for Ender, Bambu Lab, Anycubic,ELEGOO FDM Printers, Black

I have tried *many* PETG filaments. All of them have left me frustrated, disappointed and discouraged. Except this one. With other filaments, I went crazy printing towers, adjusting profiles, and still ended up with a blobby, stringy, crunchy mess. With Creality's CR-PETG, I made a few minor adjustments (*) to a Cura profile offered by CHEP and ended up with a beautiful print. What worked for me on my Ender-3 Max Neo: 230°C printing temperature, start to finish* 85°C build plate temperature, start to finish* 50mm/s print speed 25mm/s walls/support speed 20mm/s initial layer speed 95% flow (100% on initial layer) 150mm/s travel Retraction speed: 55mm/s 0% fan for ten layers and then 50% after that* With CHEP's 70°C build plate temperature, my prints would lift at the corners. At 85°C, I had excellent adherence. The "color" sits mid-way between glossy and matte, leaning slightly more toward glossy. Print strength is excellent. I cannot get my 30mm² x 3mm test piece to so much as crackle when flexing it. I will be buying this filament again.

This filament is just fine. I do run Bambu Studio calibration before using any new filament, so my comments include the caveat that I did run the Flow Rate and Flow Dynamics calibration. But after that this filament prints really nicely.

When getting into 3d printing there’s so much to learn. I know when I first started I’d see people supporting filament in boxes to keep them from moisture and all this craziness, but honestly I just buy this and it sits around until I’m ready to use it. My prints come out exactly like I need them to so the quality is pretty good. I never have issues with nozzle clogs or filament tangles since it’s pre spooled. Many of the parts I print are for outdoor use and get exposed to uv, summer heat and winter cold, but the oats hold up great and maintain function. Only parts that are load bearing will need to be reprinted from time to time which is to be expected

I've bought 8 rolls, used 6 so far. It prints fine. BUT, 5 of the 6 have had moisture levels above 30%, requiring extended dry times. Also, at the end of roll, the filament is looped into a hole on the spool. As such, it doesn't pull free from the spool to disengage the filament sensor. Otherwise, it's been printing fine on an Elegoo neptune 3 pro. 235°/80°. Walls at 35, infill at 50.

I’m calling user error on any of these low reviews. Everything I’ve printed with this filament on my Prusa MK4s, Bambu A1 mini, Bambu X1C, or Bambu H2D have some out really good. Dry at 65 for 8-12 hours, and everything comes out great! It’s strong, good layer adhesion, well wound spool, no bobbles no problems. Just don’t 3D print in your dirty wet garage and you’ll be golden. Value for quality is hard to beat on this one. I wait for it to go on sale for $13.50 which is a good price. Anything over $15 a spool and we can’t talk

Bought this expecting mediocre results given the very affordable price but I was pleasantly surprised when my prints came out better than other filaments 1.5-2x the price. This filament has a lot of temperature variability allowing you to use it at various temps. I found this filament to be very strong and durable but also very flexible without showing signs of stress. This filament did not require anything to promote adhesion either and I found the size tolerance of the filament to be extremely accurate.

Works well

I have seen many people struggle with PETG in printing groups and forums but I have always had great success with Creality brand. Quality, consistent results and cheaper than most other name brands.

Gjort två utskrifter med min Bambu Lab X1C, och fick riktigt bra utskrifter direkt. Var bara att ställa in lite i profilen för filamentet.

Not bad filament. I dryed it for 6h at 50°C straight from the factory package and I didn't noticed any problems. Printing well on Bambulab P1S using standard PetG profile.

prints really nice .

Printed several parts with this PETG and it’s been very reliable. Filament came neatly wound with no tangles, and I had no feeding issues during longer prints. It prints smoothly with good layer adhesion and a clean surface finish. Minimal stringing once settings were dialed in, and the parts feel strong and slightly flexible as expected from PETG. For the price, this is solid filament and I’d buy it again.

Prints amazing with a fantastic finish would highly recommend