34 inch Red Visor Lights, 40 LED Windshield Interior Lights

Got these to use for car shows to motivate & interest people into scuba diving. They fit my 2017 RAM 1500 Bighorn perfectly & also fit in my 2009 KIA Rio LX. I really like how the company makes different color options for these exact model lights. Which means it should fit most vehicles. I like the different flash patterns, take down lights, & how you can keep the main lights flashing with the take down lights at a steady burn/on position with the press of the little red button on the left visor light. Plenty of wire length, durable, very bright even behind visor tint day or night, functions as should, good color, metal housing, plastic led covers, & suction cups, & they look professional. Definitely visible to everybody & easy to install. Came with good clear instructions & 2 different mounting options with either screws or suction cups. No rusting. Overall highly satisfied & recommend!

These are very nice and bright, only issue I've had so far is flashback at night time because the top of the leds are not covered up so it causes very bad flashback but I fixed that with a strip of rubber gasket along the top between the lights and my headliner. The last would be a daytime/night time switch installed on the bar itself to allow to get low power mode to cut down on the flashback, also added some stripping along the bottom of the bar with rubber to make the light reflect more out from the window.There are very nice for the price and work pretty well

Such a good bright like with so many modes. I love to feature where you can have just take down on an them make them stone with take down still on and have the option

I purchased this for my POV in the fire department. The lights work really well and are absolutely bright enough to see even I the direct daylight. There are 2 big things to be aware of; the first one being the mounting brackets, second being the flashback. Because the brackets are universal they will not be a tight fit on your visor and for myself personally get in the way of my rear view mirror (2014 F150). I was able to overcome this by manipulating the provided brackets, just know that you will not be able to return the product after doing so. The second problem is the flashback. BE CAREFUL AT NIGHT. There is a very small flashback in the daylight but be very cautious at night. These lights are powerful enough to blind your windshield in the pitch black. I used a piece of cardboard and some duct tape to make a fin to help with this but it is not perfect. A small issue that I have also noticed is that the suction cups that they provide do not seem to work well even with the adhesive pad underneath. This may be because of my placement however I bought stronger suction cups to replace them and they work great. Overall these lights are a perfect product for the money.

Very useful for the intended purpose. I only do parking lot and facility security overnight and late second shift. It’s nice to have lights to let everyone know where to find me when they need me as I am usually a sought out person. These are perfect as they are bright enough to bring the attention to me I need when they are looking for me. Installation wasn’t the easiest for myself but I also tend to make things more difficult then they need to be. Even without the suction cup I am highly confident they are not moving even on the bumpiest of roads. Wish the suction cups were a tad better but I’m not on to complain about that as most suction cups are come and go. If I don’t like them I can find some that I do like and switch them out. Overall I like these and they look nice. Thanks guys

Surprisingly bright for an inexpensive set of lights. Plenty of cable as well.The brackets don’t work in a Silverado. I ended up flipping the brackets around, widening the hole slightly that would normally go over the inboard side of the visor clip, removed the outboard side of the visor and installed it back over the supplied bracket. I used Gorilla double sided tape instead of suction cups and put a little bracket on the outboard side of the lights as well so no rattles. Seems as solid as can be.Time will tell if they survive the summer heat up there but happy thus far.

Don’t let my three star rating fool you. This review is for a “permanent” mount to a 2021 Telluride. Trust me, I would give this unit 5⭐️ if the manufacturers would have brainstormed to come up with a better solution regarding not only placement of the power cable, but also the joke of a “universal mounting bracket,” which I tossed into aluminum recycling. Video to come.It is EASY to design a solution by doing several mods as I did:1) With 3/4 of major countries driving on the right side of the road, place the outlet power cable on the left hand outside visor as it faces the windshield. This unit has the power cable dangling from the MIRROR side which makes no sense to me. I wound up unscrewing the LED panel, cutting the power cable, adding a hole to the tapered end and using heat crimps to the spliced cable inside. A better idea? Add a removable surface mount connection to one tapered end, and holes on each inside panel plus the other outside visor, so that if purchasers want to switch the power cable to the opposite side visor, all we need to do is unscrew the panel and switch the cables around.2) Abandon the “universal visor bracket because most purchasers can’t install them properly. What I’ve done is grabbed two L brackets (with suction cup mounts, photo added) that are supplied with the LED traffic advisor light bars.Using two 1/2” wood screws along with lock washers for each of the tapered sides of each split visor, first I attached a suction cup and removable screw (and 3M VHB sticker disks for a secure windshield attachment) to each of the inside suction cup mounts. Sticking the inside portion of the visor to the windshield, I then measured two holes for attaching the L bracket with two suction cup placements that I had from an old traffic advisor light bar. Holding the tapered end of each visor, I measured for two holes to be drilled into the visor panel by screwing two good suction cups with screws into the existing slots of that bracket and sticking it (WITHOUT tape at first) onto the windshield, butting the tapered portion against the bracket and marking two spots in order to drill pilots holes for two metal screws with locking washers, making sure to aim each split visor for the angle of your windshield. Tighten the new bracket with cups to the visor, add double. Sided sticky tape disks and then stick onto your windshield.Once finished you can unscrew the three suction cup mounts whenever you need to clean your windshield or when you want the extra viewing space for things like watching drive in films lol.The unit itself doesn’t quite have the wattage with 3 watt diodes, or TIR lenses that will send strobe lighting well down the road for approaching vehicles. The red color seems really true to top of line emergency strobes. For my truck this length just barely fit with the mods that I used. I have enough space for A pillar airbag deployment which is a critical consideration.

Easy install and very well built