TGDGAMER MATX Micro ATX Case, High Airflow Slim PC Case with 80mm Fan-Black | Compatible with mini-itx and ATX power; USB 3.0 x1 i/o port, black chassis, ideal for gaming/office with efficient cooling

I recently purchased the MATX/ITX High Airflow PC Case, and I must say, I'm thoroughly impressed. This case strikes the perfect balance between compactness and functionality. Despite its smaller size, it accommodates both MATX and Mini-ITX motherboards seamlessly, making it versatile for various build preferences. One of the standout features for me is its exceptional airflow design. The case comes with strategically placed vents and fans, ensuring optimal cooling for my components even during intense gaming sessions or CPU-intensive tasks. I've noticed a significant difference in temperature compared to my previous case, which speaks volumes about its cooling capabilities. Build quality is another aspect where this case shines. Despite its affordable price point, it doesn't compromise on sturdiness or durability. The materials used feel premium, and the construction is solid, providing ample protection for my components. Moreover, the layout of the case is well-thought-out, making cable management a breeze. There's plenty of room to route cables neatly, which not only improves airflow but also adds to the overall aesthetics of the build. In conclusion, this MATX/ITX case exceeded my expectations in every aspect. Whether you're a casual user or a hardcore gamer, this case is sure to meet your needs. I highly recommend it to anyone in the market for a compact yet high-performance PC case.

This is an excellent small for factor Computer Case. I have been building custom computers for 26 Years and have used 100's of cases and i REALLY like this case. !st its an EXCELLENT case for the Price, 2nd its good looking case (especially if you add 1 or 2 120mm RGB Fans (it doesn't come wit them) it does have 1 rear fan (not lighted). Cable management is a bit of a challenge because there is no space for them between the case and side panel, so they have to be inside the case (where there isn't alot of free space). It is possible Especially if you have a modular or semi modular Power supply and don't have to use all of the cables. If you only use 1 120mm fan in the front you can organize and cable tie them in the upper right of the case. Anyway i have used many small case and i do like this one very much. If you are looking for this type case DON'T hesitate Buy this one...

Pros: - Cheap (as low as 18$ of you get the same case on aliexpress) - Smol (~15L in volume) - Aesthetically pleasing Cons: - not beginner friendly - difficult to cable manage (but not impossible with good planning) - construction isn't the sturdiest but with the side pannel on doesn't flex too much - front fan mounts don't allow for a 120mm radiator or alternate heights to mount the fans Other notes: - Can fit a 267mm in length gpu if you don't mind disassembling and reassembling the card like a ship in a bottle, as well as omitting the bottom fan - max wattage for a CPU with the largest cooler that will fit (PA 120 mini) is about 100w, any more amd it'll thermal throttle. - max wattage for a GPU is about 240, any more and it'll heat the CPU too much and also thermal throttle. - the holes on the side aren't quite big enough for regular case fan screws but thinner ones with a nut on the back will fit(did require widening slightly by rotating a Philips screwdriver in them) - does fit a 80mm fan with 4 screws on the side, or a 92mm fan with 2 screws and slightly cockeying the fan(ONLY IF YOUR GPU DOESNT EXTEND ABOVE THE TOP OF THE PCIE BRACKET) Overall: Definitely can't beat it for the price, does have room for improvements but if you set your expectations accordingly you won't be disappointed DISCLAIMER: he first one I received didn't appear to have shipping damage but the case was bent up and dented where the PSU mounts Parts list: CPU: 4790k @4.6ghz 1.269v CPU Cooler: PA 120 mini Motherboard: ASUS Z97I RAM: Gskill 2400nhz cl10 GPU: GTX 970 FTW+ 1500mhz (1.2v) 8300mhz PSU: TX550m FANS: 2X 80MM TR8, 1x 120mm TR12

Im rating this case 3 stars because there's a couple issues (I would rate it 4.5 if I could) but this is an overall good, small and cheap case. The biggest problem is also the reason I bought it: it's very small. I put an mATX motherboard (Gigabyte B550M-DS3H AC) in it, and it's a 9.6"x9.6" board. It sits right up against the front IO panel PCB, and you will not get two 120mm front fans in with a board this big. I even had to modify just one to get it to fit around the ATX 24 pin connector. The included 80mm is molex-powered, so I recommend just throwing it out and using a PWM 80mm fan. Overall, I'm happy with it. It's cheap, light, small and it works. Just be ready for some issues if you buy one.

For 30 bucks, you really can’t beat this little case. I got it in white. Came the next day and was even small enough to fit in an Amazon locker. There’s enough room for an m atx mobo, or itx mobo. (M atx makes it alot easier to find parts for a good price but beware you will have less space than if you were to use an itx) Also enough room for a discrete gpu, but clearance is limited, and you will probably have to use a smaller gpu (such as 5700 xt itx or another single fan card like the 2060 or rx 550) I tried to put a sapphire nitro rx 580 inside the case and there was not enough space. Vertical gpu riser would def help with this and give you more options. You can mount 2x 120mm fans on the front panel which is fantastic for airflow, and it comers with a pre installed 90mm exhaust fan (little bit of a bonus) but if you’d like to replace the exhaust fan, there is only enough space for a 90mm alternative fan. Front panel connectors for usb, power button and reset sw are also included. My one complaint it the front usb ports. Only 2.0, no 3.0, and while the price is cheap enough, it’s 2024, and nobody needs 2.0 on the front of a pc case anymore. Which is why I’m deducting one star. Still well worth the buy in my opinion. This is perfect for a light gaming rig or an office/work pc.

I bought this to house an older build that is still quite good at gaming, but the case was too bulky. I have a similar case from Zalman (Cubix) that was small but decently constructed. This case is NOT that. The metal is thin and easily bends. The side panel thumb screws are difficult to turn with your thumbs (had to use a Philips to get them loose). The case feels shoddy and if corners could be cut, they were. The worst was the PCIe slots. I had to fiddle for an hour go get my graphics card to sit down fully in the slot because the prongs at the bottom would not align with the very skimpy slits the case provides, and the cover that locks all the PCIe cards down had no screws that matched whatever thread the were using. In the end I got everything together but it was unnecessarily difficult That said, I'm keeping the case because I wanted a small-ish, cheap case for this build, and that what this case is – smallish and CHEAP. If you enjoy PC building and value your time and sanity, skip this and get a Zalman Cubix, which is only slightly larger, slightly more expensive, but of much better construction and fit. This one's a DOG.

I don’t write many reviews on Amazon. But I felt I needed to do one on this computer case. First things, I love this case. It’s basic, doesn’t use any unnecessary rgb stuff. It fits MATX motherboards easily. For size reference I’m using an ASUS H370-M Plus motherboard with a ASUS Dual GeForce 1660 Super GPU. That GPU does fit the case, you just have to slide it into the case at an angle. And it fits a full atx power supply. Cable management is rough. So I’d really recommend a modular power supply if possible. But if not a regular power supply does work. It’s just a matter of getting the cables you don’t need into the one corner. Fitting the motherboard in I’d start from the front at an angle sliding it in just under the front power/USB panel, then bringing the rear down. But I absolutely I love this case. There are a couple of things I wish they did with it. First thing is add some rubber/plastic/foam pads or feet to the solid sides of the case. Looking at the last pic you can see where I added some rubber feet to the solid side of the case so I could lay it sideways for how I wanted it. On the bottom of the case there isn’t any rubber/plastic/foam pads either but there is feet molded into the case. I’d recommend buying some feet with adhesive to the bottom. I think the last thing is on the front side there is enough room for 80mm fans, but there isn’t any holes to place them there. I could mod the case to add them, but I don’t want to accidentally push through and mess up the front plastic. Now there are two places in the front to mount two 120mm fans. But unless you have a modular power supply, the cables you have to move around and out there would scrape the fans. So if at all possible I would highly recommend a modular power supply with this case. But I did get my non modular power supply to work fine.Over all, I’d absolutely buy this case again. And probably will for another build down the road.

This is a great little case for a basic no frills office PC build. I love the compact size which is just barely large enough to mount a micro ATX board in and by far is the best thing this case offers. The cooling fan is the old school one that plugs into the older, large PC power supply power plug (like for old IDE drives) instead of the more modern/desirable mini 3 or 4 pin that plugs right into the motherboard but the fan is quiet which is nice and more than enough to cool a 65W CPU that I used. Most basic PC builds are just a motherboard with CPU that is graphics capable, M.2 primary storage and a stick or 2 of memory - so everything on board - so I like the compact size that just barely fits the matx board for that basic build. I don't think I'd try to install a graphics card in this as there is no depth and the volume is tight for hot air to collect in; however I did install a small PCIe card to provide old LPT type printer connection. The cover plate for PCIe is a bit janky, it is just a 90 degree plate that screws on top of your peripheral card(s) and needs to be snapped off the back of the PC in order to pop the motherboard in. It feel like a bit of an afterthought and probably could be done better but that is a minor gripe. The feet are hard plastic and not rubber so they will slide around a desk or hard floor, I would have preferred rubber but that is minor and can be remediated/hacked if it was really a problem. Finally the case is a bit thin and tinny but I think many are today at this price point so again not terrible as its probably durable enough for a desktop PC. Finally the design is very basic, industrial, utilitarian, not really a minus - just what you get at this price point. I really wish I could get a slightly better version of this case with slightly heavier gauge material, rubber feet, and a 250W-300W UL listed power supply to use for basic builds but until I can find that combo I would but this again. Only negative now that AI have build a couple of PCs using this case is that tthe back side of the PC doesn't come off to allow access to the bottom of the motherboard which is often necessary when attaching an OEM CPU fan so I install the CPU and cooler on a bench then install the motherboard into this case with the CPU and cooler already mounted. Negative is that if you ever need to pull the CPU.or cooler you need to pull the board.

Looks very nice and is compact l!

Bastante justo para meter una grafica, pero me gusto el tamaño, el ventilador que viene con el case es algo ruidoso pero sirve perfectamente. ＼(^-^)／

Un gabinete pequeño, pero útil para lo que yo quería. No esperes muy buena calidad de materiales. Otra cosa positiva es que si viene con los tornillos necesarios para armar una PC en este gabinete

I had a bunch of older components laying around that would make a nice gaming PC for steam os(in my use case chimera os). I wanted something on a budget and could fit into a tv cabinet. This fit the bill. It unfortunately didn't fit my rx570 which mine measured 260mm the max size this case can supposedly fit. I'm sure if if I really wanted it to fit I could make it but it was just temporary until a new to me rx5600 arrives (that's is shorter). So as temporary solution to my temporary solution I used an rx6400 from another build. A modular power supply would be a lot nicer since you can't run your cables anywhere to hide them. The case didn't have any noticeable sharp edges other then where you punch out the slots for the GPU or other add on cards. Overall I'm happy with what it is. It was less then $50 cad when I ordered it and offers good air flow. I don't think you easily get a 260mm card in this case but your milage may vary depending on the components you use.

Everything I needed to put in this case fit perfectly. All the hardware, standoffs and screws, are included. What a great case for under $50. No fans were included but I usually upgrade the fans anyway. There is only room for thin (15mm) fans in the front. This case is not for a high-end system with a big GPU and requiring big cooling. I fit a mATX board, 500 watt PS, small graphics card, one SSD, and had plenty of room for cables.