LASFIT T3 7440 7443 LED Bulb Brake Tail RED 7444 Light CANBUS Error Free New Extremely Bright 7444na 7441 7440NA W21W WY21W with Built In Resistor Anti Hyper Flash(2pcs)

Don’t even think twice about buying these brake lights! They are so super bright you increase your chances of safety by being seen! There are a LOT of led bulb makers on the market but in my experience Lasfit is worth the extra price. They are a Canadian company and make excellent products and back the products up with fantastic customer service. Thus far I’ve replaced my: -headlights -bright lights -fog lights -front turn signals -rear turn signals -rear brake lights -back up lights All with Lasfit led bulbs. Each one is so bright they’re perfect. I purchased some here on Amazon and some directly from their website. I actually recommend using their website as they have a vehicle selection tool that will find the right fit bulbs for your specific vehicle. Their customer service is outstanding. I had an issue with one of my fog lights not working out of the box and they sent me a replacement pair for free no questions asked. I also was experiencing “hyper flash” with their front turn signals and they worked with me through online chat and email to send me replacement bulbs in a different series that worked. It’s hard to find good customer service these days so they earn top marks on that front from me! I’ve ordered Lasfit led bulbs for every single bulb replacement on my 2021 Ram Bighorn and they’ve not failed me as a company. These bulbs are truly plug-and-play; installation is a breeze! Do yourself a favor and order these today!

EDIT: This is the second bulb I’ve had fail within a year. First bulb stopped being a brake light, didn’t get brighter with the pedal. Now I have a bulb that doesn’t want to be a running light. Luckily I have another brand new one sitting at home from the set I got under warranty when the first bulb failed but once I lose another one (which I’m sure I will) I’ll be using something else for LED Taillight bulbs. I was happy initially but now I’m disappointed with the quality of these bulbs These worked perfectly in my 2020 Toyota Tacoma. I had to buy two pairs since my tail lights have 4 bulbs total (2 for each side) which made my total investment north of $100 for some light bulbs. Do I feel it was worth it? YES! These are exceptionally bright with a perfect red color temperature such that they look OEM but also look much better than the stock bulbs at the same time. You get snappy on and off for your turn signals and your brake lights. I have experienced zero warning lights on the dash and no hyper flash. They truly do seem to be completely plug and play. Edit again as of Today 1-30-26 I noticed neither of my brake lights were working. I opened the fresh pack that was sent to me under warranty and one of them didn’t work straight of the box. I made it so now I have both brake lights but no rear right turn signal. I busss an Orielys visit is in order to get normal bulbs for this truck. Yay PLEASE NOTE THAT MY TRUCK IS EQUIPPED WITH THE FACTORY LED FRONT LIGHTING PACKAGE THAT GIVES ME ALL LED LIGHTS UP FRONT, this could be why I have no hyper flash but I suspect it’s just because these are fantastic LED light bulbs

really bright, plug n play, extremely rare to see a code thrown but does happen for a minute. sitting in traffic for extended periods may cause the lamps to overheat and shut down to a flashing mode to cool the LED's. When / if that happens, throw your vehicle in park and get off the brake for a minute and they will cool and return to normal. overall they do their job and work well. have recommended this installed on 2014 Ram2500, can-bus system

Beware that these are a lot brighter than you’re gonna think which is a good thing. Easy installation process, and fit perfectly into my car. I would recommend these to anybody looking for an LED blinker swap.

Nice bright lights, no hyper flashing but they lasted less than a year before the tail light function failed.

Rear brake and turn signal bulb fits late model Blazers with halogen brake light bulb. Nice crisp bright red. Way better than the OEM bulb. Does not hyper flash and does not give an error message. Found this bulb from a Blazer owner on a Blazer group on Facebook who has used this bulb for about a year with no problems. If it doesn't work right away just flip and plug in the other way. Will probably work on late model Equinox too.

Update 8/9/24: Both lights died after 6 months. They use resistance and heat as a means to prevent hyperflash. It shows. The car failed inspection for tail lights completely not working. I took them out and they were HOT! Replaced them with standard incandescent and the lights worked fine. This was the 5th set of LED tail lights that I have ordered for my car in an attempt to stop hyper flash. Not only did they finally stop the hyper flash, they are bright, fast acting, and easy to install. There are no fans to make noise which drove me mad about some of the competitors. There is also no delay for the switch between LED sets if you turn on the blinker, they are very responsive. Really love how bright these are, how they don’t use fans, and the color temperature. NOTE: The base of these are polarized, so if you plug them in and they don’t work, flip them around and they will work fine. I’m super stoked about these and excited that I finally found a bulb that ACTUALLY eliminates hyper flash! Highly recommend!

Update March 2024: Three months after purchase, it seems both bulbs will no longer power up the turn/brake mode. They draw 12 watts for a few seconds then drop to 0.23W. One bulb just dimly lights up while the other doesn't light up at all. Both still power the running light mode as normal. I'm not sure if it's a bad pair or what, but will attempt to get warranty on them. UPDATE 2: LASFIT warranty was easy to deal with, and they shipped out a replacement pair. We'll see how long his hair lasts. Original review: I've used other Lasfit turn signals before and have been pretty happy with them. They were the prior full brightness ones that will hyper flash after a few minutes of being on. To me that trade off was worth it for being as bright as they are. Since for this truck, the brake and turn signal are one bulb, I knew I wouldn't be able to use the older, brighter style. This new style looks to be working well. Leaving them plugged in to a power supply you can tell how the bulb pulls less power as it starts to heat up. Initially, it'll pull around 11.66W at 14V. After 3 mins of being constantly on, it had dropped to 8.3W at 14V. At 5 mins, it was 7.3W. At 8 mins, 6.9W. At 10 mins, 6.8W. At 13 mins of being constantly on, 6.7W at 14V. I was trying to simulate a condition of being stuck in traffic. Unfortunately, I didn't have them in a taillight housing to compare how visible the drop in brightness was. Attaching a video so you can see difference between an incandescent bulb. Yes, the LASFIT bulb is a bit brighter but the biggest difference is the speed at which the light illuminates.

Lasfit didn’t honour their 1 year warranty They told me to buy and new one and they would refund the new amount