Quartet Glass Whiteboard, Magnetic Dry Erase White Board, 4' x 3', Frameless, Brilliance White (G24836W)

Cool

Muy bonito diseño, es perfecto para espacios pequeños y fácil de limpiar.

Quality was good and not difficult to mount. Happy with the purchase.

Product works as a kitchen notice board. Easy to write on. Easy to erase. Easy to photograph on your phone to take shopping with you.

Use the box to make your template! From one large side of the box, pull back the top tab to open it, which leaves a straight edge along the top side of the box. Cut out the other 3 edges of the side panel. It doesn’t have to be straight because you will use the straight top edge that you didn’t cut to square it up on the wall. Lay the cardboard down and completely remove the foam pieces that are glued to it. A metal spatula or putty knife works great. Lay the glass board face up directly on the cardboard and match up the straight edge of the cardboard with the straight edge of the glass. Use a Sharpie to trace the glass around the other 3 edges and the 6 circle cutouts for the hardware. Find the studs in your wall. A strong magnet will work better than any stud finder. It will stick to the drywall screws under the surface that hold your drywall onto the studs approx 16” apart). Make sure the 2 center holes of your template go into a stud. The other 4 holes did not line up w a stud, so I used my own plastic anchors in those. Tape your template to the wall and use a level to get your top or bottom straight edge straight. Trace the 6 holes on the wall and remove the cardboard. DRILL THE TOP 3 HOLES ONLY!! If you drill all 6 and the bottom 3 are slightly too high, this will cause your board to slightly bow, creating constant pressure on the glass, and a possible explosion. I drilled all 6 holes at once, and after hanging my board by the top, I had to slightly lower the 3 bottom holes even thought they all looked centered, so better to wait until the board is hanging. After drilling your 3 top holes, remove the template from the wall and attach the foam pieces from your box to the wall (the nicer springy foam that was holding your glass). It is too thick as is, so I used a kitchen knife to slice it down to the exact thickness of the hardware that will keep your board away from the wall. If you leave it as is, your board will bow out from the wall. It has to be the exact depth of the H/W. Insert the H/W in the top 3 holes, have a 2nd person help you hang the board on the hardware, and screw in the top 3 screws NOT tightening too tight. Now that the board is hanging, carefully drill the bottom 3 holes straight in the center of each, and attach the hardware, again, not tightening the screws so tight that there is any pressure on the glass. The board is very solid with the foam in the back, and I have no fear of it exploding in our homeschool area as the holes were all drilled correctly, and we did not tug the board right or left to line up with a mis-aligned hole. I am a woman and did this on my own. My son helped for 2 minutes to help me lift the board onto the 3 top hardware pieces and screw in the 3 top screws. It all sounds like a lot, but it is very doable and worth it. We love our board and MAGNETS DO WORK. Purchase a box of neodymiums from Amazon. They are cheap and work very well. I put them inside of these googely eyed microfiber erasers, and they stick incredibly well even through the thick fabric. We bought these magnets and they are awesome. You can stick whatever you want on them to personalize them. https://smile.amazon.com/gp/product/B072KDBJWC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 LOVIMAG Super Strong Neodymium Disc Magnets, Powerful Rare Earth Magnets with Double-Sided Adhesive for Fridge, DIY, Building, Scientific, Craft, and Office Magnets - 1.26 inch x 1/8 inch, Pack of 12