Tandefio 15% Silver Brazing Rods Aws Bcup-5 40pcs, HVAC Silver Solder Stick | Flat Welding Rods 0.050"x1/8"x10" for Air Conditioning, Refrigerator, Cold Storage & HVAC Units, Phos Copper Brazing Alloys

Our rooftop AC unit developed a tiny crack in the coil next to a misplaced screw when installed. My man is a skilled welder so in an attempt to potentially save thousands of dollars on buying/installing a brand new coil, we removed it ourselves and used this to repair the hole in the copper tube as well as to reinstall the coil into the unit. He tore out a section of the fin pack about an inch around the hole and cleaned it as best he could. He flowed argon through the coil (any inert gas should work) while using a propane torch to braze the hole closed (definitely want some good ventilation for that part). Back up on the roof, we did the same thing to the two copper pipe fittings to reinstall the coil into the unit. Our AC guy came out, did a pressure test, and a vacuum test/clean on the system and bam... we have AC again!!

Bought this for its PVC welding claim. It just melted and deformed the pipe, while the rod turned into a messy blob. No strong bond formed at all. Completely unsuitable for plastic, avoid using on any PVC repair.

Great price point, compared to buying at brick and mortar supply house. Seemed to flow very well, comparable to the name brand Silfos from Lucas-Milhaupt. The sticks are way shorter length wise than the name brand ones, but you can just melt two sticks together if you need the added length. Would be great if they came in a resealable container, that would be my only recommendation for improvement

Definitely not a 15% silver brazing rod. Requires too much heat even on smaller cooper lineset sizes. I compare it to a 0% brazing rod. Price point is what made me purchase this. I wouldn’t buy again. I used it on one job and ended up regretting the decision. Sticks are brittle huge waste of time.

I needed to braze some copper tubing and it worked. I am not a pro so I will reframe of talking about how fluid it is or it I can notice the amount of silver in it. It worked for me at a fraction of a price of other brazing bars.

The 40 rod, 10" package had no indication of the contents of the metal. I discovered a covered up label in Chinese that had 15% on it. I hope it means 15% silver. I decided to test it and it actually worked OK to braze copper pipes. This was my first attempt at brazing, so I didn't know what to expect. I took a star off because the lack of labeling leaves you wondering if you received the 15% silver. I would get longer-20"- rods in the future.

Used this with Whirlpool Top refrigerator so ICE buildup melts accordingly. It is doing exactly that in one of our fridge. Hoping to install on another fridge to see if it is working as expected.

Tried welding stainless steel per instructions. The solder just beaded up and rolled off, with no wetting or bonding. Even with clean surfaces, it failed. It's at best a low-temp braze, nowhere near the strength needed for "welding" steel.