Question 1

The base rbr850 is connected to a router via ethernet. does the satellite rbs850 need to connect to the rbr850 via wifi or can i use ethernet?

Accepted Answer

You should be able to add an ethernet cable for backhaul.  I would suggest it, use CAT6 would be best.  Backhaul wiring is going to be faster than Wifi backhaul signal.  CAT6 cabling is rated for 1gb and PoE.  Also, the cabling type being installed for the last few years in new homes with digital ready feature.  Also, cabling length you don't go over 100 meters or 328 feet.  I usually stop cabling at 300ft.  300ft is a 100 yd football field.  Unless your in a mansion cable length isn't a worry.

Your best speed on wifi will come from the base router, it is the first hop from your home network to the internet provider equipment.  When you add more satellites (which are extenders)  your going to be adding the first close to the mesh router just within range to get it's signal.  Your next one you would connect within range the 1st satellite.  You'll see they talk about coverage of square feet, and not to exceed to so much sq. feet on a system.  Because your satellites are drop on signal quality the further away you are from the router.

MESH systems are good for small homes, where you can get by with a mesh router and one or two satellites. The best configuration is get the router centered in the house, you can always run a cable from the ISP modem to the router.  Then set your satellites in range of the router, not in range of satellites.  You'll have a better and stronger setup with Wifi signal as backhaul.  You can improve that backhaul and speed to satellites by wiring them to the router or switch that is connected to router.

Question 2

Can the rbk852 be used with the orbi outdoor satellite?

Accepted Answer

no

Question 3

Do you have to use the Orbi router, or can you use the Orbi satellites with an Xfinity router?

Accepted Answer

I have the RBK 853 system in my home. I am pretty sure if you want to run Orbi satellities you need to have the main Orbi router to take advantage of the excellent wifi 6 mesh features of the Orbi system. This last weekend I helped a friend with an Xfinity modem / router box combination install an Orbi system. Just connect the main Orbi router via ethernet cable and sync the satellites. Boom fast wifi everywhere first floor, second floor, basement, attic even out in the yard. Just spend the money you will never look back. Assumes you buy the fast internet connection from Xfinity of course.

Question 4

I purchased the rbr50 and two rbs50’s right before the release of this rbk852 bundle.  :-/  what’s the most cost effective way to incorporate the 852?

Accepted Answer

Be careful, one series of orbi may not be compatible with another series. Stick with the rbr50's.

ASIN	B0BXFRPH3Q
Antenna Location	Home
Best Sellers Rank	#9,318 in Computers ( See Top 100 in Computers ) #37 in Whole Home & Mesh Wi-Fi Systems
Brand	NETGEAR
Built-In Media	One Orbi Router (RBR860), One Orbi Satellite (RBS860), 6ft. Ethernet cable, Two power adapters, Quick start guide
Compatible Devices	Personal Computer
Connectivity Protocol	WiFi
Connectivity Technology	Wi-Fi
Control Method	Touch
Coverage	5,400 sq. ft.
Customer Reviews	4.5 4.5 out of 5 stars (36)
Data Transfer Rate	6 Gigabits Per Second
Frequency	60
Frequency Band Class	Tri-Band
Is Modem Compatible	No
Item Dimensions L x W x H	29.2L x 27.2W x 23.1H centimeters
Item Weight	3.84 Kilograms
LAN Port Bandwidth	10 Gbps
Manufacturer	Netgear
Maximum Upstream Data Transfer Rate	6000 Megabits Per Second
Mfr Part Number	RBK862S-100NAS
Model Name	RBK862S
Model Number	RBK862S-100NAS
Number of Ports	1
Operating System	NETGEAR OS
Other Special Features of the Product	WPS
Security Protocol	WPA2-PSK, WPA3, NETGEAR Armor
UPC	606449166163
Wi-Fi Generation	Wi-Fi 6
Wireless Compability	802.11ax

NETGEAR Orbi Tri-Band WiFi 6 Mesh System (RBK862S) – Router with 1 Satellite Extender, Coverage up to 5,400 sq. ft., 100 Devices, 10 Gig Internet Port, Armor Subscription, AX6000 (Up to 6Gbps)

Details

Details

Description

Specifications

Common Questions