HF End Fed Antenna, 4 Band 8 Band 1MHz to 30MHz 100W Power End Fed Radio Antenna SSB FT8, FM, FSK for Outdoor

Found a 12/2 100 ft roll of low voltage lighting wire on amazon. This looked like good 12ga wire, and exactly what I needed for a Ham Radio End Fed Longwire. The roll is exactly 100 feet, by splitting into the two separate wires I ended up with 200 ft of 12ga wire. I needed 134ft+- for the antenna. I took the 100ft length and added the extra 34ft by soldering the ends, and sealing with heatshrink tubing. I also bought The 1:64 Balun (Actually it's a UnUn), attached it as shown in the picture, and hoisted it up a 18ft clothesline pole with a nylon rope, and ran the wire over to a tree on the other side of the yard, looped it through a insulator attached to a eyebolt, and ran it across to the other side of the yard to another tree. The wire was too short to reach the tree, so a piece of nylon rope finished the run to the eyehook screwed into the tree. I cut the antenna wire for the low end of 80 meters, and it has a less than 2 SWR upto 3.845 mhz and less than 2 SWR for 7, 14, 21, 28, 29, & 50 mhz for 6 meters. Any spots a little off, my Icom 7300 has a built in tuner that does the job. First contact on 40 meters from Lavel Quebec was a solid 5/9. So, if your looking for wire that will work as an antenna, couple it up with this Balun/UnUn and this may work for you as well. UPDATE: Now that I've had the chance to check out this UnUn/longwire on other bands, I'm Still more than happy with this product, and the antenna I made from it. If I can hear the station, It can hear me. I've broken 20 meter pileups to Czech Republic, Serbia, and Netherlands using 100 watts without any problems what-so-ever, and total cost was under $150.00 for all the pieces needed.

Ich bin zufrieden, macht was es soll. Aber man braucht eine Masse. Mit Masse verdoppelt sich das Ergebnis.

Installed 135 of #12 stranded, with the transformer end at 40 feet, rising to 50 feet at the center and ending at 60 feet. Initial testing with 41 feet of RG8X had good results from 80-10 meters. Final coax length will be approx 100 feet of RG8X. A good replacement for my 80M inverted vee, now having "all band" capability. Also have another similar unit with 88 feet of wire for 60-30-15 M use. Both of these use a CMC about 10 feet down from the transformer, consisting of 12 "loopy" turns of the coax on type 43 cores.

Parfaite avec un long fil de cuivre de 40m au minimumvous aller meme captre des stations sur le 160m

This is a good a good deal. Well built little unit and very economical. Replaced an MFJ end-fed box that had fallen apart after a few years. I connected 132-ft. of 16 g stranded steel/aluminum (?) coated wire to it, spools of this stuff available cheap from Amazon. Loads up for less than 40 W excursions on 80 mtrs, loads up much better on 40, 30, 20, 17, 15, and 12 meters thru an antenna tuner. I kinda gave up on trying to get it to load on 10 meters, but alas, discovered that my antenna length resonated satisfactorily on the FT4 portion of the band at 28.18 mhz, kinda opening a new world of dx for me on that band. For the ends of coverages, 160 and 6 meters......the antenna absolutely refuses to load up on 160, and will barely load up down at the bottom of the 6 mtr band (by bottom, I mean around 50.025 mhz). The 6 mtr coverage is a function of the wire's length, and it works so well on everything else that it will stay as is until it falls apart, as they all do eventually. I have the box hung from a 16 penny nail on the side of the house, attached with a couple of long zip ties from the box to the nail. The wire goes up into the top of a tree about 60 ft in the air, then takes a 90-degree bend and is tied off in a stand of my friendly, cooperative neighbor's trees. I've been operating this antenna now for about 4 months, and I am very pleased with the box. Buy with confidence. Be mindful your coverage will be a function of the exact length of your wire. Oh, and for a ground point......I have a lightening arrestor installed with a ground rod directly below the antenna. After the coax goes thru this connection, it proceeds another 15 ft or so to the shack. This arrangement works fine for me. Not willing to gamble on how well all this works during a lightening strike, I always disconnect my coax from the antenna tuner after I shut down my station every time.