Solution Finish Full Installation Kit - Enriche, Condition, Protect; Black Plastic Trim Restorer (12oz) + 2 Microfiber Towels + Applicator Sponge + Gloves

This is a perfect product for any detailer or owner of a vehicle with fading trim. Whether your trying was originally black or dark grey, there's a version of solution finish for your trim. The product applies extremely easily and the finish lasts for several months (easily 6+). Take the time to thoroughly clean then IPA wipe down your trim and simply apply, wait a couple of minutes, and buff off the excess.

Incredible simple to use with great results. I just took my car through the car wash and then used a bucket with soap and a brush to scrub the trim before applying. Make sure all spots are dry. I used a cotton swab for hard to reach areas. Really easy to get off of the paint if you accidentally get some on it. My Bronco Sport has a TON of black trim and this brought it back to life so quickly after being faded by the Texas sun. I could easily use this bottle for 4 more applications. Great value. No smell. It is greasy during the application but that goes away as it dries. Will update this review with longevity and durability.

I used this to restore the "rubbermade bumpers" on my 2006 Honda Element. The product did as advertised turning the streaked, faded plastic a nice dark black color again. The car looks brand new! I cant speak to the longevity of it yet, but it retained its color through the first wash and my main goal was to darken and even out the color. PREPARATION: -This is a black stain, so there was a lot of preparation involved not to make a mess or get dark marks where you don't want it. I spent a lot of time getting the plastic spotlessly clean. Washed, scrubbed and cleaned with alcohol, then rinsed and dried again until no dirt was coming off. I suspect some of the people complaining that this didn't work or that it went back to dull grey after getting wet did not clean the surfaces enough beforehand. Porous materials and light grey plastic will need to be completely masked off. It wipes off of gloss paint very easily - so I disagree you need to mask the color-coat. APPLICATION: Yes- its messy. You need gloves and a lot disposable towels. I did not use the applicator supplied with the kit- its too large for precise application IMO. I used a set of disposable foam brushes in several sizes that could be used more precisely and could get inside any edges to the moldings. A little goes a long way, and its best to apply as thin a coat as possible and wipe off excess. Any towels you use will be trash afterwards. A day later when I could see a few thin spots I just reapplied to even it out. FOLLOW UP: This did not dry out as quickly as I expected. I had to keep a roll of paper towels handy and kept wiping down any suspicious areas. I was still getting black schmutz wiping off for a few days, so there is a danger of staining your clothes if you brush up against it before it cures. I would NOT use this on the interior of my car for that reason, unless it was a floor mat that could be removed and left out to be completely dry/free of transfer danger. VALUE- This large bottle will last FOREVER and I would have preferred not to buy the "kit". My vehicle has a huge amount of plastic, but I used only a tiny portion. I guess the value is good given this is a lifetime supply? I tried in vain to find the smaller bottle sold alone. It's sold out everywhere for obvious reasons. 6 months later: The plastic is still a nice dark color. Again- I think that proper preparation is important if you want this to work properly.

Just applied this today , top first picture is the before faded and the bottom and second picture are immediately after using the product. Time will tell for how this product will hold but the initial application is looking wonderful

It works. It works really well. A little messy but man the difference is might and day. Highly recommend!

This is my 3 rd bottle. I am doing plastic truck liner to my old Toyota and coming out fine. Just need a few coats. This feel like black oil. Need a few coats. I read someone got dirt on it when doing and now won’t come out. If you get dirt on it, wipe it off right then. My wife’s Honda Ridgeline was grey, .i bought Black Satin paint and painted the sprayed liner bed then used the Solution Finish. Perfect!!!! It’s been 6 months and still black. It takes a while to dry but it work. 3 rd bottle.

Excelente producto

product is crap. I had to pressure wash my trim pieces after the 4th as the dirt buildup and dirt finish would not come off after a wash. ended having to pressure wash and still could get the product completely off. now i have to paint the trim pieces because of how bad they look. This has cost 8 times the amount of money for the stupid product. This should be banned and you should not be in business.

I was looking for a product that would restore the black plastic on my vehicle without the need to go to a car detailing company. This product was found and it looked like it would do what I was expecting so I ordered. I have subsequently received the product and used and the results are pretty good. I was amazed how easy it was to apply and the end results brings the plastic back to near new, impressive. I will definitely be ordering another supply to ensure I can continue to apply when needed. Another great product.