Raspberry Pi Screen 7inch Monitor IPS 1024x600 HDMI Capacative 7'' Touch Screen Monitors Compatible with 3B+/3/2 B/B+/ Banana Pi Windows10/8.1/8/7 Driver Free 5-Point Raspberry pi Display

While my 3D printer is showing its age, I hoped to bring some life into it by upgrading to Klipper firmware. It should give me the ability to fine-tune the print quality of the machine. This 7in HDMI screen was just what I needed for the conversion. Being HDMI, this screen didn't need any additional configuration to work with the raspberry pi. I just loaded up Raspbian on my RPi3b and booted up. Once done, there really isn't much else to think about when it comes to the screen. It just works. It has a decent resolution and has good picture quality so that I was able to do all of the setup and configuration on the screen itself. After installing Mainsail and connecting it to my printer (sounds easy but it took a couple of hours), I finally had the long process of calibration to look forward to. After that, I set up the Raspberry Pi to boot directly to the webUI in kiosk mode and I'm now able to control my printer from this 7" touch screen. This was a fun project that took me a two days to complete but it was worth it. I have a great printer setup with touchscreen controls and a great UI. All made possible by this 7" Head Sun screen.

Essentially a straightforward setup. My Raspberry Pi 4 required a screen, and this item is compatible and functions well with it. It includes an HDMI to mini HDMI cable for easy connection to the Pi. Its size is perfect— easily portable. The screen colors are bright. The monitor is great for any Raspberry Pi project. It's also ideal for various small DIY projects. The price was fantastic, and I couldn’t be happier with the purchase. It comes with everything you need: an HDMI cable, a Micro HDMI adapter, a Micro USB cable, and some screws. Highly recommend!

I bought this for my 3d printer to run KlipperScreen on my raspberry pi 4. It connected right up and instantly turned on and worked out of the box. There is a power button on the one side if yours doesn’t automatically turn on. The packaging was ok, and in my case perfectly fine. The thin plastic the screen sits in was a bit damaged but the screen is fine. Also note, there are 2 micro USB ports. If you read the PCB one is for Power Only. While the other can power AND function the touch screen. I saw another review that the touch didn’t work. It’s possible they plugged the usb into the power only port. The touch screen/power port is closest to the HDMI port. Throw the instructions away. Honestly they are useless. I think they were taken directly from a different 7” display as the drawn picture for it doesn’t show the right buttons/inputs. Says there’s a button for backlight on/off. There is not. And doesn’t show any of the other buttons (power, menu, up/left, down/right, and exit). Also a headphone jack and VGA port. I haven’t tested either, and likely won’t ever use them. The screen itself is not perfect. However, it is clear and has good color. Scrolling on pages it has screen tear (this could be a pi thing with the way it’s configured on mine). Also the backlight around some parts around the edges is blown out a bit (too bright and makes black screen have a slight green/white tint). If you press firmly in the lower left corner of the screen, half the screen thens this green/white tint. The screen also doesn’t sit flat on the pcb and is Inconsistent in places. Should be interesting to 3d print a case for it. It actually has a slight bow in it from corner to corner if you put a flat edge on it. There is a very thin plastic film protecting the screen (which is glass). It was hard to find the edge to peel off. The hdmi and usb cables are short. But perfect for me since it will be right beside my Pi. The usb cable is actually nice and is braided. It’s about 10.75” (tip to tip). HDMI without adapter is about 1ft. Adapter from HDMI to micro HDMI is about 1.375”. The HDMI cable is thick and seems good quality. For the price and functionality for me is perfect and will do what I want it for. However I have to knock off one star for the irrelevant instructions, the slight backlight issues, and how the screen is mounted to the PCB. Otherwise, perfect for my use.

I use this as an emergency backup to access my mini-pc in the event I can't access it remotely when using it in the field on my telescope. When it arrived, everything worked great and as advertised. Fast forward months later, I had an incident in the field where I couldn't access the pc remotely. I connected the screen (which I mounted to a sturdy board and kept in a case) and the backings to two of the buttons had fallen off and the screen was longer touch sensitive.

Works great with my Pi4’s. Ordering a 2nd screen now.

Display is good, included cables are garbage. But overall a positive value

Excelente pantalla. La función de táctil es perfecta.

1st one came cracked. Had to return. Hassle free return, straightforward. I got another one shortly after. I am using this product as an infotainment screen replacement on an adventure to put a raspberry pi 5 in my car. So far, it is doing quite well. Had to modify the board a little bit to make it fit, but once I got that figured out, it was smoothe sailing.