- A2113 A2141 Laptop Battery Compatible with MacBook Pro 16-inch A2141(2019 Version) EMC 3347,fits MVVJ2xx/A MVVK2xx/A MVVL2xx/A MVVM2xx/A

I have a MacBook Pro Early 2013 Retina which for a while has been giving me battery issues, and won't hold charge long if unplugged, so decided to gamble and buy a new battery for it. This is not OEM, but gets the job done. For me the work I got it to fit was to lined it up correctly where I needed, test it out a few times and then I took out the adhesive from the back and laid it against the Mac softly so I could adjust it left or right as needed to fit the screws toby the connector (the piece that connects the battery to the motherboard). then I added simple pressure to the rest of the pack. Noticed on the pictures that the battery does not cover all the space at the bottom, there is a gap compared to the original battery, however everything else matches up. I did have a bit of trouble getting the connector in, notice your original battery how the connector wires are actually bent to let it fit down, where this , since is new, the connector wires all came straight so at first seems like its he wrong connector or won't fit, but what you have to do is easily bent them down allow it to the connector to fit/click in place ( just take note of how your old battery's connector wire is bent and try to form the shame shame). I used the small plastic stick that came with the package , to help add pressure down to hold the connector wires down while I bent it down with my fingers. Once you get that done and plug it in, no issues. Took about 1hr to full charge. (when I first plugged in it was charged showing at 66%). The instructions recommends you let it drain away to 2% (no 0%) and then do a full charge. Also the battery (as I mentioned above) comes with an adhesive which you remove and makes it stick to the motherboard (above the trackpad), however on top of it there is also a small plastic clear thin film, which you also remove after you are all done, before closing the case. see the pictures of the installed new battery vs my old all swollen battery. On a scale from 1-10 to replace this battery, (1 very easy , 10 very hard), I rate it about a "4" , however removing the old battery itself I rate it a "6". Do be careful when you remove the 2 middle batteries , do it slowly and carefully otherwise you will rip off the metal plate that sits between the trackpad and the battery. I mostly followed the advise of videos I found on line to use a string and put it under and slowly pull/saw left to right to help remove the old battery.

Amazing fitment, worked as originial afger the installation and setup period 4full discharges and charges battery calibration went beautifully and worked like brand new original. Worht the price. Recomend it!

Worked as described. Delivered on time.

Battery is charging fully appears to be holding a charge and is working fine. However the battery plug cable was bent over and crimped in half, I had to un-crimp it so hopefully no long term issues.

This is a replacement battery for a Lenovo ThinkPad E495 (2019). It took nearly two minutes to replace. The battery immediately started charging, after plugging in the adapter. Upon logging into Windows 11 Pro, indicators showed it was plugged in and charging. Once to 100%, I unplugged and began running processor heavy apps and videos for about 6 hours. Ran it down to 20%, and plugged the adapter back in, then charged back to 100%. It is reporting healthy and at full capacity.

I got this as a replacement for a dell xps 9500 laptop. It claims to be the same model of battery and claims to be compatible but I absolutely is NOT. The laptop rejects it entirely and refuses to charge it. DO NOT BUY.

Arrived on time with a full charge. So far so good.

Exceeds expectations!