SIMPLIHOME Draper SOLID HARDWOOD 60 inch Wide Mid Century Modern TV Media Stand in Black For TVs up to 65 inches for the Living Room and Entertainment Center

This cabinet was easy to put together and is a very good quality we were quite satisfied with the quality of the wood and the hardware. It suits our purposes perfectly and puts the TV at the right height in our family room we like the large storage areas on each side plus the two shells in the middle. The feet are also very high quality. I highly recommend this product

This thing looks great and is definitely the sturdiest piece of furniture I own. The teak brown looks so much more vibrant in person compared to the photos and I love it. All the holes lines up perfect, I read some reviews that said they don't and they probably fully tightened the screws before all of them were at least threaded in. It was really nice to see a extra hardware bag with at least 1 extra screw of all the different types, even an extra Allen key, which both were ball end Allen keys which makes threading in screws in tight areas much easier, love to see it. It's the perfect size for my 65" LG OLED TV, if you have a 65" it will fit perfectly. The shelves are held on with pins and have a good amount of customization to suit your needs. I opted to drill another 2" hole on the backing on the left side so I could hide my power strip and all my other cables inside the cabinet so they wouldn't be seen. All in all I'm very happy with it, very strong and heavy duty and should last the rest of my life.

I recently purchased this TV stand for my living room - I love the teak color and the mid century style is perfect for my 1940s-era home. The stand is sturdy solid wood, and really heavy. I'm a woman in my mid-40s, and I was able to assemble this alone in about 4.5 hours (though actual assembly time was probably closer to 3.5 - I took several long breaks to rest, strategize, and swear during the process). The instructions are clear and the parts are well organized BUT if you're assembling this alone you'll need to get a little creative. Power tools help a lot. I found that resting the stand on its front during the initial assembly to attach the side and interior panels was the easiest way - any other way required too much effort to balance the base. Once I attached the legs, I stood it up to attach the top. This part went surprisingly fast. The left door went on perfectly - the pre-drilled holes were perfectly aligned BUT were not well drilled, so I inserted the screws first, reversed them back out, and then installed the door. Same issue with pre-drilled holes on the right door BUT the holes weren't aligned correctly and even following the instruction of inserting the middle screws first to adjust the alignment didn't work. I ended up having to stand the unit on its end and rest the door on the ground, and use a ruler to align the holes for the door on the right. It still doesn't hang perfectly but it's much better, and fatigue beat out my OCD after about 1.5 hours of trying to get it perfect. I also accidentally reversed the interior panels for the shelves, so the predrilled holes for the magnets were on the wrong side. I was able to remove those without having to disassemble the unit and reverse them once I realized my mistake. Definitely pay attention to the instructions here - I didn't and paid for it. I didn't install the backboard at all. I like it better open, but was planning to install it anyway. The fact that there was only ONE predrilled hole in the back to secure the backpanel was the deciding factor in leaving it off. I just didn't have the energy to try to force in the other 14 or so screws required to hold the back panel in place at 1:30 am. Having a friend help would definitely have made the job go easier and faster, but it CAN be done alone. Just be prepared for some challenging moments and colorful language. And watch your toes as you're moving it around. In the end, it came together beautifully and looks fantastic in my living space.

This TV stand is modern, quality and beautiful. I am picky and don't like cheap things. This looks both expensive and it's solid. I have a 65 inch Samsung standing on it and it fits perfectly, super strong. The wood is classy, I chose deep brownish. It's super modern and very up to date. I love it. Don't hesitate to get it. Looks way more expensive and not cheap particle board at all. Take your time to put together. I did it alone with an electric drill and laid out all the pieces. Wasn't hard at all. Too about an hour or so...wasn't paying attention. It went together easily and they give you extra screws which is great.

I don't normally leave reviews but this purchase made me want to. The Draper Low Console was a pleasure to work with because it's really wood. I know I'm not going to get a quality hardwood piece at this price but I'm happy with what I got. I'm so tired of trying to find something affordable that isn't particle board or MDF with a micro-thin faux wood plastic laminate that scratches off it you look at it too long. I'm really happy with the vintage look of this piece too. It's perfect for my record player stand with plenty of room for albums, standing on edge, in the side compartments. I used a power drill to assemble it but when attaching the top, the screw heads are hard to get at so use the included socket head wrench with a ball end - the ball end helps a lot. A couple of the screws wouldn't tighten down because the pilot hole was a little large or the wood a little soft. I just replaced them with the next larger screw from the hardware store. I tightened all of the preinstalled screws too and found a couple of those "stripped" as well and stepped up the size for those. Not a problem. When installing the doors pay close attention to get the hinges high enough so that the bottom of the door doesn't scrape when it's closed - you'll only get one shot. I found the factory marks to be spot-on but it helps a lot to use an awl to make a little pilot holes for the screws. Also, do yourself a favor and have someone hold the door for you. I did it by myself but it was frustrating (the pilot hole with an awl helped a bunch). Anyway, I like this piece a lot and will go back to Draper products in the future. If this is the look you are going for, look no further.