FENRIR Motorcycle Handlebar Bar End Mirror CNC Forged Aluminum Alloy Black Round foldable Anti-vibration Anti-glare Large field of view For Sport Naked Street Cruiser Scooter Heritage Roadster

GREAT QUALITY, AND I LIKE THE SIZE BETTER THAN THE FACTORY BAR END MIRRORS. I BOUGHT THESE FOR MY RE GT650 BECAUSE BY BIKE TIPPED OVER WHILE PARKED AND THE MIRROR WAS THE ONLY THING DAMAGED. IT SNAPPED OFF AT THE BASE AND I NOTICED IT WAS MADE OUT OF CHEAP POT METAL, WHILE THESE ARE QUALITY ALUMINUM. THESE ARE ALSO ABOUT 1/2 INCH SMALLER DIAMETER MIRROR AND ABOUT 1/2 INCH SHORTER CONNECTING ARM. THE END RESULT IS A MUCH CLEANER LOWER MINIMAL LOOK THAT COMPLIMENTS THE BIKE VERY WELL. ALSO, THE FACTORY MIRRORS HAVE A FLAT FRONT FACE, AND THESE HAVE A CONE SHAPED FRONT FACE SO THEY ARE MORE AERODYNAMIC AND YOU GET LESS BUGS STICKING TO THEM, AND WAY EASY TO CLEAN MOPARED TO THE FACTORY ONES. I'M GOING TO ORDER MORE SETS FOR MY OTHER BIKES NOW!

I wasn’t sure if these would work, but I saw another reviewer say they put them on their scout bobber sixty. I have a 2020 model and I can confirm they do fit. They look sharp. And installation was very easy. Just need to cut a small hole through the rubber at the end of each handlebar and they screw right in. I haven’t taken them for a ride yet, so I can’t comment on vibration but they seem like they should work fine. I put mine below the handlebars and I can see just fine. My arms really don’t get in the way at all. As long as you position them properly, they don’t knock against the tank. They are also slightly tinted if that makes a difference to you. Overall, I’m very happy. I hope they hold up. Update: vibration is not bad, but I did need to add a spacer on the throttle side because the mirror would twist with the handle. Added a few small washers and problem solved.

I can confirm these mirrors fit a 2024 husqvarna 401 svartpilen with no significant modification. These mirrors come with several adapters to ensure they fit a wide range of motorcycles. The mirrors mount securely without any significant vibration even at higher speeds (which is notable since my bike is a "thumper," i.e., single cylinder motor). The powder coating is good quality as is the mirror itself. It does, in my opinion, notably improve the bike's aesthetics and looks like it could be factory/OEM. Keep in mind, you'll probably want to fill in the bolt holes that will be open once you remove the stock mirrors (they sell inserts, but I just used some new bolts I had laying around which I painted black to match my handlebars).

Smaller than stock but not too small, easy to install and gives me a good view of what's behind me! Mirrors are not warped. Probably will but again if I drop my bike. Not 5 stars bc stock mirrors are slightly better only bc they have Triumph logo, this is just a good set of mirrors, nothing fancy.

When I bought my used XSR900, it had one stupid little side mirror. Not wanting to die, I realised I needed to see the cars around me. I got these because they were a good price, aluminum, and had good ratings. I'm really glad I did! They can be mounted facing up or down, I chose up because my bars are somewhat high. Installing was.. Annoying. The throttle likes to move the mirror as you twist, so you'll have to install it with a gap, which is obnoxious to do, but not an issue once it's installed. I have found that they like to move over time unless the screws are REALLY tight. Lock Tight is a must too. Once install is done, they're great though! They have a slightly blue tint to them, which doesn't affect anything, that I think makes them anti glare. The anti glare is incredible! I didn't even think about it until one night I realised I hadn't been blinded by car lights in a while. It really works! They're also easy to adjust, stay in place once adjusted, have a large range, and are real glass! For some reason I can't add a photo to this review, which is a shame because they look great!

The right-side mirror was defective...too blurry. I was not able to see objects from the mirror. I reached out to Fenrir customer service and they refuse to accept responsibility. I provided my phone number but they never called. They asked for the part number and photo, and I sent both. The photo did not include an image of their laser ID name, so they suggested that I may have obtained a fake product. I then sent them another image containing their laser ID name on the mirror but they did not respond. I purchased the item from Amazon, so Fenrir refused to send me an exchange since it was not purchased directly from them. Now, I lost the labor fee that I paid to have the mirrors installed. I would not recommend buying from this company. They refuse to back their product. The quality of the items being sent to the customer are not being inspected. The buyer is taking a big risk by purchasing from this vendor.

Fyi for those looking through what bike, installed this on a Honda CB300R, in short doesn't fit on bar end, did not want to use the adapter caps so I had to get crafty. These look great and was nice minus the constant vibration on the reflection and the poor fitting on my bike. For those of you with a Honda CB300R that do not want to sacrifice their bar end as the part does not fit anywhere close to it you will have to shave and take a good several hours depending on what tools you have to make these fit on the bar end which will lose the black and reveal the aluminum metal. In the end I did not like sacrificing my bar end and did just that and jammed that holder onto the bar end. Other than that I love the mirrors they reflect just what I need when I ever need to glance which I hardly do and it makes my bike look more aesthetically pleasing compared to the ugly stock mirrors.

After trying multiple others off amazon that wouldn't fit right and pinch throttle. These, with the FENRIR adapter, actually fit correctly. Build quality seems decent, hardly any vibration and they stayed in place. 2025 XSR700

Para mí continental GT excelentes!, muy buena calidad de materiales, construcción y visibilidad, quizá sean un poco más pequeños que los originales de agencia pero los recomiendo como mejor alternativa.

Mirror moves by wind and no way to adjust it except by removing mirror glass by breaking glue!

Très bon produit, qualitatif et facile à monter sur mon z900rs.

PERFECT fit and excellent upgrade for my Husky. Would 1000% buy these again.

Produto de qualidade. Chegou como descrito. Fácil instalação. Atendeu a espectativa.