52cc Petrol Garden Brush Cutter, Grass Line Trimmer

After reading loads of reviews, I was unsure what to expect. However, it’s a great strimmer. I live in the middle of nowhere and electric strimmer’s are a pain. Not only do I have a large garden but the surrounding area is left to do it’s own thing, I’d had enough at looking at long weeds and brambles so I thought I’d give it a go. Assembly was easy. People seem to struggle starting it and there is a little knack to it but if you following the manual it works fine. I find it floods really easily but if you’re aware of this you don’t make that mistake. Set the trigger lock on, prime it, 5 pulls with the choke on (from cold) no more, turn the choke off and give it a few more pulls. Never had an issue after the very first time when I flooded it. The brush cutter works. I cleared a lot of large brambles and weeds from the area surrounding my garden. The strimmer head is easy to change and after I’d cleared the big stuff away, I’ve only used the strimmer head. It is a thirsty machine, but I’ve found if I only half pull the trigger there’s plenty of power to cut grass and it saves a load of fuel. Yes you can adjust the running speed but I have it set so the idol runs correctly. The harness is actually really handy. I didn’t think I’d use it much but it makes handing it a breeze. A lot less back pain than bending over with an electric strimmer. I’ve had this now for 2 month and I use it weekly for around an hour continuously, I have a large area to clear. I’ve had no issues with it so far. Some people have commented it’s unsuitable for professional gardeners, I can’t comment on that, but for a regular people it does fine. Value for money, I’m tight and wanted a decent strimmer for a low price. Cheapest strimmer I could find for the engine size. My only regret is that I wished I’d have bought one sooner.

When my 30 year old brush cutter / strimmer finally gave up the ghost (estimate to repair was over £100), I started looking around for a replacement. I was initially put off this one by the price - it seemed too cheap to be any good, as equivalent machines from the big names are 3 or 4 times the cost. I eventually set my scepticism aside and went for it. I'm very glad that I did! I can't believe how good this is for the money! It took me about 5 minutes to put it together (I'm a Mechanical Engineer!) I put some 2 stroke mix in it and it started second pull. Runs like a dream and starts really easily. The quality is excellent and the auto-feed line head works really well. Given that an equivalent branded 52cc machine will cost you between £300 and £400, I still can't believe the quality on this for the price. OK - it may not last me 30 years like my old one (which I paid £200 for 30 years ago!!), but if I get 5 years out of it I will be more than happy! Don't be put off by some of the comments about it kicking when you start it. All petrol engines of this size will kick a bit if you don't have the right technique. Just pull it slowly until you feel the piston start the compression stroke and then give it a sharp pull (don't be tentative!) - mine starts first time, every time, with no kickback at all. Only slight gripe is that the shoulder harness isn't that comfortable compared with my Stihl harness, but there again I paid £50 just for the harness, so I'm not complaining at all (especially as this strimmer fits my existing harness no problems). Highly recommended.

I have used this brush cutter for one day so far with both the blade and then the spool. I had been considering a Stihl but this one was a third of the price so took a gamble on it. I was expecting a few niggly faults considering the price and they have already materialised after the first day. But overall they are minor issues and the machine does seem to perform well in general, the engine started easily the first time and runs well with plenty of power. The issues I've encountered include the rubber hand grips which started to rotate on the handlebars within the first hour. A more major issue was the first time I opened the spool to refill it with line one of the clips that hold it closed snapped off, and I wasn't using any degree of force in opening it. So now I have to get a new spool. But for the price I'm still fairly satisfied so far, unless more faults appear next time I use it. Update: Parker agreed to send out a replacement spool. I have used the brushcutter on a couple of more days and overall still quite satisfied with it. I have been mostly using it with an Oregon mulching bar and they make a great combination as the bar requires a powerful engine to be effective. Paired together an area of thick brambles, docks and bracken is reduced to.. well literally mulch. But don't leave the fuel can too far from you, the engine consumes fuel very fast when used in this way. But the fast clearance of large areas is worth the high consumption. I have used the spool for much less time. The first time I refilled it, with around 4m of line, it only lasted 20 minutes. Too early to say if this an issue with the brand of line I bought or with the spool itself.

This brush-cutter/strimmer is remarkably cheap for a product of this power. It requires about 40 minutes of careful assembly, but the instructions are clear and all tools are provided. The brush cutter blade cuts through thick vegetation (like stinging nettles and brambles) easily, although making sure the blades don't strike the ground takes practice. My one arrived without a locking knob, which at first didn't seem a big deal as I couldn't move the two parts supposedly locked, but 20 minutes of use proved me wrong. I informed the vendors and a new knob arrived within 3 days. My only hesitations are (1) the small tank size. Even when full of 2 stroke/petrol mixture, it only lasts about 30 minutes, and I was clearing a large riverbank of overgrowth. It took 3 refills, i.e. mixing 2 stroke oil and petrol. The kit arrives with a well-marked mixing bottle, so it's not difficult, but it is time-consuming. (2) The machine is quite heavy and use of the harness is essential. It's a good harness, though watch out for the inside of your right arm, as the plastic plate and clips do tend to scratch if you're not careful. Overall, a good machine for a very reasonable price, and great after-care. Would buy from these suppliers again.

UPDATE JUNE 2020 Bought a 52 cc brush cutter in Feb 2019. Within 3 months and 4 or 5 uses, the fuel tank bracket snapped due to fatigue of very poor materials. Parker Brand refused to replace the part, claiming it was wear and tear. Amazon offered full refund if I sent it back. I didn't bother because it wasn't stopping the brush cutter working. The ignition coil has just packed in. Parker Brand refused to replace it under their 2 year warranty. I pointed out that it isn't on the wear and tear/consumable list of items excluded from the warranty. James Peacock was very unhelpful in his two replies and said that although the coil isn't listed as an exclusion, it is in fact excluded from the warranty. I doubt that that is even legal. I will never knowingly buy from Parker Brand again and recommend nobody else to fall foul of their mis-selling and false warranty promises. The brush cutter was essentially good value, given the price. The customer support is non-existent. Many other budget brands will sort these issues free of charge without quibble. The warranty promise is a fraud. AVOID Parker Brand. ORIGINAL REVIEW My old Stihl had too many problems so I went for a cheap option given that it's only for occasional use. This is a good tool for the price, happy I bought it. Pros: Easy to assemble Very easy to start, cold or hot Beefy engine, never bogs Absolutely destroys anything it's pointed at, the disc gets a lot of use Good on fuel Cons: The engine is a bit lumpy at mid revs, not sure if it's fine tuning required on fuelling or if the engine balance is slightly off, at tick-over and higher revs it's great, just like a Stihl The nut that holds the disc on has a tendency to come loose, it's necessary to tighten it way beyond that required on a Stihl, too tight in my opinion, I used a rubber back washer and that sorted it The split pin that prevents this nut coming off is made of cheese string, not safe, replace with a decent one straight away The tool kit supplied is rubbish, I snapped the head off the plug/nut spanner on first use, throw it all away, good tools are available very cheaply This strimmer seems to be too long or wrong angle on head, I'm 6'1" and I feel too short when using it, hopefully this is due to handle adjustment but I haven't got it right yet. That said, the shape and size is almost identical to my old Stihl FS 120, so maybe operator error. Overall it's a very good strimmer, for the price. The switches, buttons, components, bolts, strimmer head etc are all quite crudely made. You will definitely get a better unit from Stihl but it will cost more than it's worth in my opinion. I would happily buy another one of these Parker units.

Easy to assemble and comes with a mixing bottle and its own toolkit in a bag so no extra tools needed. Followed the starting instructions and after 2 pulls with choke on, turned the choke off and it started first pull. When warm it started first pull every time. I have to admit that for the price I was a bit dubious about buying this but going on the reviews I needn't have worried. I bought this as my inlaws both have big gardens which need clearing and having spent 7 hrs nearly constant strimming, well you need to stop for the odd cup of tea, clearing the first one I am impressed. Took everything in its stride. The harness is a bit of a faff to get right but when adjusted its comfortable for all day use and the quick release makes it a doddle if you need to take the strimmer off/ on. The only issue I have found with using this is the trigger design. It's mentioned in other reviews as well so it's not just me but I think it's too wide so the edge is uncomfortable on your finger. I found using my middle finger instead of index was a bit better for me. If a different trigger design could be used maybe a thinner one or more rounded on the edges as its a bit square this would make it perfect. Having said that I would still have no hesitation in recommending this to anyone especially for the price.

I received the strimmer and at first glance I was impressed. The engine is easy to start if you follow the instructions and is very powerful. The only 2 issues I have are 1. The enclosed harness is very small and I really struggled to get it to fit my 6ft 3ins, 15 stone frame and 2. Within 2 hours of using the strimmer, the cheap plastic stand had snapped off, such a shame as everything else seems well made. If the stand had been made of metal this fault would not have occurred. So overall I would give it 4 stars out of 5

I used this brushcutter yesterday for the first time on a farm where I shoot. I cut several beater tracks through woods of brambles for about 2 hours. It is well balanced, easy to start and restart after a break, very powerful and very capable when using a mulcher blade (see photo) rather than the standard cutter blade. I have used a much more expensive Einhell Brush Cutter for years and unfortunately it gave up on me a month ago. This new one is equally as good and a lot cheaper in price but not in quality. The safety guard is very good. On the Einhell I had to remove the guard because it got clogged too easily but this one is tough, large and did not clog at all. Another advantage of this one is that you can split the bottom section of the drive shaft so it is easier to store and transport. Having said all that, why oh why include a cheapo petrol mixer with such a quality device? The bottle cap didn't even fit. Apart from that this is an excellent product.