80mm/3.14" Rubber Tires & Plastic Wheel Rims 2.2 Inch 12mm Hex Hub Compatible with 1/10 HPI WR8 Off-Road Rally 1/14 WLtoys 124019 144001 1/16 Redcat Volcano RC Buggy (Black)

Work absolutely great for the fts10 but you do have to sand/grind the inside lip of the wheel for suspension clearance in the front. Not a big deal took me about 10 minutes with my Dremel to do it. The rims are really thick nylon plastic so there is plenty left after clearancing. Slightly larger size but I didn't have to clearance the body to make them fit so they were good. Very very good traction the larger size also increases the gearing so you get a little bit more speed. They wear a little better than the stock ones but when you power slide on pavement they all wear pretty quickly. Overall the best and cheapest option to re-shoe your rally car. Update: upfitted to 4S power and they actually lived through one pack. Gotta pay to play and with these you pay less to play. Works for me. Update- these are your best option for the xts rally car. I've tried at least 4 different wheels/tires and these are by far the best. They held up to 65 mph 4s power through a couple packs. Yes you have to grind the lip a little but nothing else and I really mean NOTHING else is worth buying. Just get these. Glue them yourself and stop whining. No big deal. On my 4th set. Last 4 to 6 packs depending on 3s or 4s. Yes 4s is freaking awesome. Worth doing. I used an old bl 120 I had laying around. Just do it. Speed rules. So do powerslides at 40 mph

Great tires done wear out fast

Excellent wheels and tires for 1/10th scale rally car! I used them on my hpi Subaru and they are great. One thing to note is they are not pre glued so be prepared to do so!

Feels pretty decent, I’m not sure how well they will hold up on a street bashed running at speed but for thick grass or fresh mown it grips nicely.

Prefect size! Installed on 1/10 trailer to pull around 1/10 crawler cleaned up the trailer look! And nice quality tires