AxxessAX-NIS32SWC-6V Backup Camera Retention for Select Nissan Vehicles

This does allow for backup camera retention on my ‘15 Titan. However, as many others have said, the video quality of the stock camera is pretty sub par. Should have just installed a newer camera to compliment the aftermarket install.

This worked great in my Nissan. I installed the ASWC-1 along with this to retain steering wheel radio controls. Id suggest purchasing the harness SG_B01D9K3L44_US (model number) as well because it includes a splice into the 12v and ground so you can connect to the AX-NIS32SWC-6V very easily. The included instructions is very easy to follow. I wrapped wires together and covered with electrical tape before making any solder connections to test everything out. All worked out fine and im very pleased with this purchase.

Installed a Pioneer 1300NEX and used that cable to have OEM backup cam connected. Works well no issues except the steering wheel controls are not for Sentra! Would have to buy an extra module for $60 but I think I can live without. Installation was easy, just followed the instruction manual (link to it in the item description).

Harness worked perfectly for my 2018 Nissan Titan.IF you are using a Pioneer receiver, please make sure you plug your yellow RCA cable into the BROWN RCA jack on the back of the receiver; Pioneer decided to be special I guess.Important tip for everyone, confirmed via talking to Metro and testing in person: Most of the receivers have a button functionality for activating the camera without going into reverse. However, in order to use this AND the reverse-activation function, you need to modify the wiring:Instead of hooking up the blue/white wire, the green/purple wire, and the receiver reverse wire together, take that blue/white wire and instead hook it into the red accessories wire of the harness. Keep the green/purple wire connected to the receiver reverse input wire. This will allow the receiver to use the reverse signal to activate the camera, AND allow the owner to manually activate the reverse camera via the receiver.

This was exactly what I needed to connect the factory backup camera to a replacement receiver. However the rest of the harness was not for this vehicle. I installed it in a 2012 Altima SL sedan with factory Bose radio w/o navigation. For this vehicle if you are going to connect the axxess aswc-1 you will connect the small harness to a completely different connector. And good luck with getting the box to aswc-1 to function properly. I had to call tech support twice only for them to finally walk me through manually programming the unit. I highly recommend the idatalink maestro controller if you’re looking for factory steering wheel controls with a new receiver. A little more expensive but phenomenal all around.

One review states that this does not work with the 2017 sentra SR turbo wiring harness and is very misleading, but it works perfectly. Simply hooked up the 12 v converter to the harness and reverse control on my radio then plugged it right into the stock harness of the vehicle and within seconds my stock backup camera was working on my aftermarket radio. Highly recommend for a quick and easy way to keep your stock camera.

I did not use this harness for the steering wheel control functionality, only for the back-up camera retention. It worked beautifully, stepping the voltage from 6v to 12v, and all the pins for the camera were correctly positioned. It was a very simple install, given the directions.

You can not install it if you’re not knowledgeable in car wiring system.

Si funciona pero en modelos mexicanas cambia el arnés

Bought the first time and it didn't work, returned the unit and got another one and it works perfectly. Very easy to install, with easy directions. Picture works well on my 7 inch pioneer head unit. Installed on a 2013 Nissan frontier pro4x.

Ended up buying a DC-DC step down converter instead

This was a tricky one to combine with the steering wheel control because I had to separate the wires that are connected together as a ground. Got it working but took some time and needed the ASWC-1 box too. For backup camera alone it would probably work.

Doesn't fit sentra 2014. Sending back. They should really specify which cars it works with. The 16 pin from the axbucs-ni326v doesn't fit the sentra's 12 pin.