ESR for MagSafe Phone Grip for iPhone 17-12,Galaxy S26/S25, Pixel 10

Amazing ring stand I use it daily then other only thing I wish is that it had magnets on the back so I don't have to take it off when putting my phone on the car mount

Excellent just what I wanted

I really love this MagSafe ring for the back of my iPhone. It looks great with the Natural Titanium color of my iPhone 16 Pro Max. I was a little surprised to find that with all its bulk, it doesn’t actually rotate. It’s fixed in place. To rotate it, you need to remove it and replace it in a new angle, or you can spin it on its plastic backing if you trust it to protect your expensive iPhone. I’ve been using mine for several weeks now, and there doesn’t seem to be any lasting damage to the glass backing. I absolutely love the double ring that extends out to become a makeshift stand, however I was a little disappointed that the rings when folded to their flattest place, are not flush with the giant MagSafe ring. So you end up with a tiered “wedding cake” stuck tot he back of your phone. Not ideal design. That said, for its design issues, I absolutely love the function of it. It feels very secure when holding it by one hand. Be careful if you wear tight jeans as putting your phone in your pocket can sometimes push the rings right off and onto the ground.

Here's a good review about the ESR Magnetic Ring, focusing on its key benefits and potential use cases: A Must-Have Accessory: ESR Magnetic Ring Review I recently picked up the ESR Magnetic Ring, and I have to say, it's quickly become one of my favorite phone accessories. ESR has a reputation for quality, and this little ring absolutely lives up to it. The primary function, of course, is to add MagSafe compatibility to non-MagSafe phones or cases. This is a game-changer. I was able to instantly use MagSafe chargers, wallets, and even car mounts that I previously couldn't. The magnetic strength is impressive – once attached, I feel confident that my phone isn't going to budge, whether it's on a wireless charger overnight or bouncing around on a magnetic car mount during my commute. Beyond the magnetic functionality, the ESR Magnetic Ring is also incredibly versatile as a kickstand and a grip. The ring itself is sturdy and rotates smoothly, allowing me to prop my phone up in both portrait and landscape orientations for video calls, watching content, or just Browse hands-free. When used as a grip, it provides a secure and comfortable way to hold my larger phone, reducing the risk of accidental drops. The slim profile means it doesn't add much bulk, and it still slides easily into my pocket. Installation was a breeze thanks to the included alignment guide. It took me less than a minute to perfectly position the ring, and the adhesive feels incredibly strong and secure. I appreciate that ESR thought of this detail, making the user experience seamless. Pros: * Excellent MagSafe Conversion: Truly transforms non-MagSafe devices/cases. * Strong Magnetic Hold: Reliable for charging, mounting, and accessories. * Versatile Kickstand: Great for hands-free viewing in any orientation. * Secure Grip: Adds comfort and reduces drop risk. * Easy Installation: Alignment guide ensures perfect placement. * Durable Build Quality: Feels premium and built to last. Cons: * (Minor) Once applied, it's a permanent fixture. So ensure you're happy with the placement. Overall: If you're looking to unlock the world of MagSafe accessories for your current phone, or simply want a fantastic, multi-functional kickstand and grip, the ESR Magnetic Ring is an absolute no-brainer. It's well-designed, performs flawlessly, and offers incredible value. Highly recommend!

initially, when I was buying I thought it might not be as strong and it might slip and my phone might fall, but after I received it I was very impressed by the strong magnet of MagSafe even if I use it without my ESR cover the magnet is quite strong but I would say that adding on the ESR cover, which I think mostly people usually add, help increase the grip. Without the ESR cover when you get out the first ring it's okay but when you try to get out the second ring sometimes it slips, But with the ESR cover on even if you are pulling out the second ring it does not slip out and it is quite a strong grip you have to pull it hard to remove it and I think once it's on you don't want to remove it. it's easy to rotate it to adjust it with the landscape or vertical rotation. Also slight rubber or plastic straight part on the ring is impressive as it doesn't slip or go sideways! well thought! I loved it I would recommend it! ***Update after 2 months: Always use with with ESR or any other Magsafe case as strong magnet and adjustments causes ring shape scratches so it will only affect the case and not the phone - Happy and still recommend it Update after 9 months: The second hinge at the base is weak and it breaks! it broke for the first one and I asked for warranty claim! got free of cost second one with instructions to be careful at base! I thought maybe I was my mistake! but the second one also became totally free and doesn't support the phone now! Not recommended

Excellent purchase with powerful hold. Easy to rotate the ring so that it can be used horizontally or vertically. Still has original colour and is very durable despite me clumsily dropping it several times with the phone. Disappointed that straight after buying with a “price drop” 📉 it went down further in price. Obviously it’s solid metal so adds weight to the phone but that’s not something that I mind. Size perfect for the magnetic ring and fits well - easy to use.

When I bought my S3 Ultra, I printed off a hard case for it. When the phone is in the case the ring holds the phone securely inside. At home with the case removed I just use the ring. So is it any good? Well, yes and no. The good points are that it looks and feels like a good sturdy product. Out of the box the hinge points are stiff, but that is good. You can use the ring as a stand for both portrait and landscape with no issues. It also acts as a finger ring obviously, for when holding the phone and to me is well worth having even without my hard case. So why only 3 stars? Because this is my third ring and the previous 2 both failed in the same way. The hinge nearest the phone suddenly lost all its stiff properties and went as floppy as if it were on ball bearings. No resistance whatsoever. Apart from flopping about, which is annoying, it also means that the two previous purchases CANNOT be used to put the phone on a desk in portrait mode anymore. This floppiness also means it feels bad when using the phone as it flops about when not using it with a finger through it while also being annoying even with a finger through it. My two previous rings had a 100 percent failure rate, but that said, each lasted about a year before the hinge went loose. It was an instant failure on both, not a gradual wear issue. Despite the failure, the ring hinges stayed firmly attached so there was (and is) no danger of the phone being dropped due to the lack of stiffness. Would I buy it again? Well, I just did, but for me that's because of it's being an integral part of my phone own specific case. If I was recommending a stand/finger ring? I would say that as long as you know the hinge stiffness WILL likely disappear at some point, then while it is stiff it is really good. I should add that the magnets are super strong too, there was never a worry it could fall free of the phone without considerable force being used. From new? it's a five star, but that 100 percent failure after around 12 months made me rate it at 3 stars.

I have purchased a number of different makes of Magsafe stand over the last month or so as I am often travelling for work via train and they are very handy so you do not have to support your iPhone if completing an email or watching the odd NETFLIX special however after a few days use they invariably lose tension and on my iPhone 13 Max Pro fail to support the phone either vertically or horizontally or simply fall over. The other issue is they often have a flip out leg that is too short so when used vertically the angle is too low. I think ESR have nailed it as after several days the tension is still holding and because they have 2 extending rings to act as the stand(see pics) you get a much better angle when used vertically and overall much more stability on both axis. The magnet is also quite robust compared to others. In essence a simple solution executed well, Recommended

This is my first ESR product and i use it with my pro max 14 . This a very high quality product . It justifies the price . Its very useful in flights where u would like to watch some already saved movies or go thru your utube downloads .Its very sturdy and the magnet strength is efficiently strong . I use it very every day and m very satisfied . Cons: Like every magsafe ring , you cant magsafe charge your mobile with this on the phone . You will have to remove it while you want to wirelessly charge ur iphone . it works well with all magsafe iphone covers . But in non magsafe covers you will have to use a magnetic ring on the cover to for strong hold . ESR also makes the magnet ring ... Overall its fantastic product if you know what you are buying

I used to think MagSafe was a gimmick…until I bought this thing. There have been many situations where it would be convenient to be able to prop my phone up. My wife has long had a case with a built-in loop type thing & she loves it. So, i thought “why not” and I’ll try this. If I hate it I can return it, and I loved that since it’s magnetic I can obviously detach it whenever I want too. It’s not as big a commitment as a case with a built-in Loop/Handle. Lol. Well, I NEVER detach this thing from my phone. I’m seriously never without it. i absolutely love it. The magnet is surprisingly strong and has never fallen off accidentally. The only way this thing falls off is when I’m wearing ONE specific backpack of mine, the straps of which seem to be custom-designed to sweep this right off the back of my phone. 🤬🤬 But that’s the best part; even though this thing has hit the pavement multiple, multiple times, and I’ve owned it well over a year (longer?) it still functions as if it was brand new. I have NO clue how ESR engineered this thing so that the articulating parts stay so tight & firm, esp and even after CONSTANT, DAILY use, and a whole lot of drops, but holy cow - it’s amazing. This thing is SOLID and extremely well designed. It has taken some good dings / divots / scratches because of my stupid backpack brushing it off, but again; that’s my fault. Other than firmly being swept off, this thing holds like crazy, and even though it’s fallen dozens of times, it still works like new & doesn’t look THAT bad, all things considered. I’m still extremely happy with it, and still surprised how much I really love using this thing. it is just so darn handy. It also makes your phone a lot easier to hold for extended periods of time. Overall, 10/5 little device. If you have ever even had the slightest inclination to buy something like this, BUY IT! Just try it out! ***Oh; and ensure of course you have a fully mag-safe compatible phone case!!!*** Great job, ESR.

Dieser 'Fingerhalter' ist interessant, da er nicht -wie andere Versionen- fest auf dem Handy oder der Hülle verklebt ist, sondern via MagSafe bei Bedarf benutzt werden kann. Bei mir ist der Fingerhalter im Einsatz mit einer Otterbox-Hülle, die speziell den MagSafe-Standard unterstützt. Auch mit dieser Hülle ist die magnetische Kraft ausreichend - das iPhone ist in meinen Anwendungsversuchen auch mit Schütteln und Wackeln am Fingerhalter nicht heruntergefallen! Praktisch ist zusätzlich die Ständerfunktion - so nutze ich es im Zug im Hochformat bei Nachrichtenapps und im Querformat für Videos. Die Standfunktion ist recht stabil, sodass auch ein Tippen von Messages problemlos ging. Im Auto kann ich diesen Fingerhalter schnell abnehmen und das iPhone dann an meine MagSafe-Halterung befestigen. Also "easy to use on the go" :-) Der Fingerhalter steht etwas 9mm hervor (siehe letztes Foto). Beim schieben in die Hosentasche der Jeans bleibt es manchmal wegen dem Überstand etwas hängen; empfinde ich aber nicht als Problem. Alles in allem durch die Funktionen 'Fingerhalter', Ständer in Hoch- und Querformat mit sehr guter Stabilität, sowie schnellem Abnehmen und Tausch mit anderem MagSafe-Equipment für mich 5 Sterne.

I'm absolutely loving the ESR Magsafe Ring Holder for my iPhone 16 Pro Max! This accessory has completely transformed the way I interact with my phone. First of all, the magnetic grip is incredibly strong and secure. The N52H magnet provides a rock-solid hold, and I can confidently use my phone without worrying about it slipping or falling. The 360-degree rotating dual-ring design is pure genius. It allows me to effortlessly switch between portrait and landscape modes, and the smooth rotation is silky smooth. As a phone stand, this accessory is also incredibly convenient. I can prop up my phone for hands-free video watching, browsing, or video calls. The stand is sturdy and doesn't wobble, even with my large iPhone 16 Pro Max. The build quality is top-notch, with a sleek and premium design that complements my iPhone perfectly. Overall, I'm thoroughly impressed with the ESR Magsafe Ring Holder. It's a must-have accessory for any iPhone user looking to elevate their mobile experience.

Top product