Acrylic Display Case for Collectibles Assemble Clear Acrylic Display Box for Lego Alternative Glass Case for Showcasing Figures Doll Toys Home Storage(10x10x10 inch, 25x25x25 cm)

This is my review of KOLIPI’s Acrylic Display Case A nice acrylic display case that comes in 13 different sizes (see seller’s home page). On a scale of one to ten, assembly is about a five. Not really hard, but you need to be careful. It took me about ten minutes to finish the assembly. It is made of acrylic, not glass, so it is a bit wobbly until you insert the clear acrylic into the base. At that point it is fairly sturdy. You also get a string of LED lights, which I am not using. You get five acrylic pieces, and the connectors to put it all together, plus a sturdy base. I am using them to display some of my more complicated dioramas, and they are perfect for that purpose. Before assembly, you will need to remove the protective film on the pieces, which was fairly easy, and then put them together using the provided materials. I will say that the holes drilled into the acrylic sheets, matched perfectly to the corner pieces. And, although the securing pins were a bit tricky, once I figured it out, the rest of the assembly went without problems. Nice boxes, and great for displaying my dioramas. I will be purchasing more.

If you're between this model and the case with slots, get this one it's way better. If you read the assembly is hard, that's a lie. I had mine together in about 10 minutes, it comes with a little USB string of led lights, I didn't use mine but saved them for later, gloves, and plenty of extra bits just in case. The case itself looks good, very clear. Once assembled its sturdy, survived a car ride and a little rough handling. The acrylic is easy to scratch though, so be gentle with anything metal. And it's a dust MAGNET, so pick a clean area and wear the gloves. The only down sides were I would prefer a gloss base, mine was matte and the case can't be secured to the base. But a little work around, you can push the extra pegs included into the gap the case slides into the base. They're the perfect size to lock it in and then have feet on the bottom. It even includes stretchy cotton gloves, i didn't think they'd fit my XL hands but they made it enough to handle assembly without fingerprints.

It's not bad. Okay it doesn't come with everything you need to put it together. Clear instructions if you don't have a brain dead moment like I did, but still clear instructions. Even comes with fairly nice gloves to put it together and not leave fingerprints during the assembling process. Size is just right for what I wanted it for VERY happy about that. The storage capacity I personally put with the size and it is just right. Gives some space without being to much exactly what I was looking for there. I honestly didn't need/want the lighting so I have it but it's not in the case nor do I want it in the case so I can't say anything about the lighting. Also I didn't think adding the lighting would allow for it to remain as sealed as it should be, so that was another reason for not adding the lighting. Also worried what the lighting might do to the item(s) inside, so also a reason I didn't add them. As for protecting the item within from dust and such. I'm not sure. It might work it might not can't really say, but I think probably it will. It seems that the edges are fairly tight so should do well protecting whatever is inside. It does take some time to put it together, and pulling off the protective plastic from the inside first seems to be the smarter way to go. Also remembering to pull off the plastic before you connect the pieces is helpful. Though I forgot on two sizes luckily it didn't seem to leave any behind when I finally noticed and pulled off the plastic after, so that was a relief.

At first I found it very frustrating because the directions were difficult to follow and the videos were no help at all. After a break and some lunch, it turned out better. I was able to figure out the proper pieces. The plus side is that it provides a dust free display for my art piece. The assembly did take a while, but it comes with a lot of pins, sleeves and “L” brackets. The kit comes with white cotton gloves, a chamois and lighting. Once assembled the top fits into the black case. It is not permanent so I can lift it off to change the display. I was thinking about getting another display case because the quality is pretty good for the price.

This was actually better than I expected after reading some of the reviews here. Assembly was not nearly as difficult and the instructions were relatively clear to understand (mostly). The panels are a little thin but for the price it’s to be expected. Beware these scratch super easy so place them on a blanket or soft surface after pulling off the film. I used Sprayway Glass Cleaner on all my cases and it doesn’t leave a film leaving it super clear. The film was easy to remove just gotta use your nail to scratch away a little corner. Great value for your money. Here’s some tips for solo assembly: 1. Place the pins into the sleeves before you start. Don’t click them just slide them all together. This will make it so much easier sliding them together into the holes. 2. Assemble this upside down. Don’t place it into the base first it’ll be a nightmare. 3. Pay attention to the notches on the bottoms of each panel single notches are front and back panels and double notches are left and right panels. 4. Pushing the pins in requires some force. So careful pushing them in and use leverage on the inside with one finger. 5. The instructions don’t mention this but the connecting arm for every corner and all sides are placed on the inside of the panels and the pins push through the outside of the panels. Total assembly time took around 10-15 mins for me. Forget the gloves just wipe it down after. Would buy again for sure.

Easy to set up and looks great! Easy to take off the top and change the contents! And they provided cotton gloves to reduce fingerprints while assembling!

I wouldn’t say this was hard to put together, but it wasn’t a piece of cake, especially having to wear the gloves. It made it very challenging to hold onto the little acrylic peg screw thingies. It’s definitely not going to help with dust protection because it is not sealed tightly at all, hence it being very flimsy. The size was as described. The clarity was great, minus a small scratch on one of the panels oh my god this thing. The base was definitely a good material. I don’t know how much of a value for the money it is but all in all it did the job and I’m not gonna return it because it took too much effort to put together that I didn’t want to have to take it apart! LOL!!!

A bit tedious to assemble but worth the effort! Be careful NOT TO SCRATCH THE PIECES......Very elegant/classy

La calidad es buena, los paneles no cierran herméticos, pero si protegen del polvo, el ensamble es muy sencillo y vienen muy bien protegidos con sus plásticos Al principio parece que no son traslucidos pero, vienen muy bien pegados y por los dos lados. Buena caja por el precio

Excelente ,fácil de armar

La vitrina la compré para posar la figura Hot Toys de la Bruja Escarlata cuya escalada es de 1/6 pulgadas y quedó excelente. -El producto venía bien embalado, las instrucciones son en inglés y entendibles. Además de que no es difícil de armarla. -Viene con unas luces que no son la gran cosa. -El plástico es bueno para el precio, pero sí tiende a rayarse fácilmente. Si quieres una vitrina para figuras escala 1/6 a buen precio es una excelente opción mientras ahorras para alguna mejor. Además de que sí protege del polvo.

A bit expensive, but good quality

Easy to assemble