🔒 Secure Your Pressure Needs with Confidence!
The RX WELD Nitrogen Regulator is a high-performance tool designed for professionals, featuring a 0-800 PSI range, a 60-inch refrigeration hose, and robust brass construction. With adjustable output and user-friendly gauges, it's perfect for HVAC applications and ensures safety with its self-reseating relief valve.
| Manufacturer | RX WELDER |
| Part number | 20220613NR |
| Item Weight | 1.38 Kilograms |
| Package Dimensions | 18.8 x 17.5 x 14.71 cm; 1.38 kg |
| Item model number | 20220613NR |
| Size | 0-800psi with Hose |
| Style | 0-800 PSI with Hose |
| Material | Brass |
| Batteries Included? | No |
| Batteries Required? | No |
M**W
Worked nicely for my A/C work
RX WELD Nitrogen Regulator with 0-800 PSI. Impressed by quality of machining on this unit. Had inlet filter on inlet to tank which was nice to see. High Pressure gauge have increments of 125 psi which is suitable for gauging supply tank pressures. Low - Supply Pressure gauge have increments of 20 psi, with zero pin and 20 psi being almost the same. This regulator might not be suitable for someone needing a quite low pressure output for very low flow work. It worked fine for supplying my nitrogen flow meter at 60 psi, as well as supplying 400 psi for a pressure test I performed. The gauge to tank inlet stem could be a bit longer so the gauges would clear the tank knob on a 125 cu ft Nitrogen tank when attempting to install the regulator with gauges in a straight up viewing, but it worked perfectly fine when rotated a bit to clear the tank knob. It just made viewing the gauges a bit unhandy. Hose supplied had a white plastic type gasket and worked fine for my work.I found after using this regulator with a 125 cu ft Nitrogen tank that the inlet stem of the regulator should be at least 1 + inch longer to allow clearance between the tank knob and gauge set. This would allow the gauges to mount vertically and Nitrogen Flow Meter if attached to hang vertically as it is intended to be used. I have not tried on a smaller 80 cu ft Nitrogen tank, but hope the smaller tank size will allow for adequate clearance so the Regulator will mount vertically.
S**N
Buy It!: Do not need other high pressure gauges for Mini Split Install
Regulator, hose, CGA580 and gauges all work and seal perfect. Set pressure less 10 pounds, when system is charged, shut off the gas bottle valve. Turn the regulator to higher setting and the high pressure gauge on set matches or goes lower. No more boost pressure is available, and low pressure gauge was tight to charged pressure for over an hour. All my other hoses and gauges were useless. Only needed this also, 2 "high quality core removers [ one 1/4" and one 5/16ths"] and a high quality 4' vacuum hose 3/8"ID 1/4", micron gauge and Nitrogen or Argon heavy gas bottle charged above 1000 lbs.
E**E
Good quality
Great value for the money.
D**H
Works beautiful
Did it's job really well. Very happy.
J**N
Nice gauge set.
Works perfectly.
Trustpilot
5 days ago
2 weeks ago
