25ft - 1/8 inch PET Expandable Braided Sleeving – Black – Alex Tech Braided Cable Sleeve

This stuff looks really good and is pretty sharp underneath the hood has a contrast to typical wiring wrap. Once I figured out how to expand it fully you can actually put over an inch sized material through this loom.

great quality materials, I fit 2, 10awg solar cables through this with a little wiggle room. hold the cables in place great. cut with scissors or hot knife, the use a lighter or butane torch to seal the threads. im not sure but id say 8awg would be compatible with this particular sleeve, be a tighter fit but Id say it'll work. unless your wiring is sliding around and rubbing on any surfaces this sleeve should be plenty strong enough to protect your cables/wires. thickness is very good, not to difficult to cut but whatever you use you definitely want it sharp! happy with this purchase and hopefully it'll last for yrs to come!!

While building a 4 XLR break out loom, I can see the quality is great. The braided sleeve was super easy to feed the cables through and the shrink wrap worked perfect. Note I have to put it into use to see how well the sleeve holds up on tour.

A little smaller than I expected - next size up would have been far too large. I thought they might expand a lot, and they will but will start fraying and ruin the "clean" look I was going for. Still, a very nice looking product and I will use it all for sure.

Great stuff, use it on wiring harnesses all the time and they look amazing. Good price and good quality.

After reading other reviews I had concerns. I had no problems at all working with this. Seems pretty sturdy and I used it to make a pretty nice wire loom for my boat trailer. Seems to be pretty sturdy material.

This product worked great on my oxygen tubing. The cats do not bother the tubing anymore.

Good quality wrap. Used in a heavy equipment application and it looks nice and feels like it will hold up. If you’ve never worked with this stuff before, be aware that anytime you cut it (make sure you have some good sharp scissors) it will try to fray apart immediately. You’ll need heat shrink tubing, electrical tape, or something of the like to secure the end. Heat shrink produces a great finished look.

ottimo prodotto lo uso come protezione di una guaina riscaldante posta su estremità telescopio contro l'umidità notturna

This stuff is possibly the best way to cover bundles of electrical wire or anything that still has at least one end available to push it on to. I love this stuff. It takes a few moment to get the hang of using it but once that is figured out it almost flows over the wires or cables that you are using it on. I used to to cover and protect a wiring harness for a skid steer I was re-wiring. It is not as tough as the hard plastic split wire loom stuff but it serve my purposes perfectly. Highly recommended.

I used it for microphone cable to provide additional insulation and strength to an XLR cable. The sleeve enables the cable to also keep its coil and twist that ultimately improves the life and performance of the cable. Ive used it with cables of both 5 and 10m long. The longer the cable the more benefit the sleeve gives to it. Mine was used with Van Damme XKE terminated with either high quality Neutrik or Nanotech connectors.

Product as described

After reading an article in Fine Woodworking Magazine where the author had used this exact product to reduce damage to his vacuum hoses. I decided to give it a try. It works better than I could have hoped. The hoses it covers are from an old Kirby Vac and a Nilfisk vac. There is no significant catching on the back edge of track saw tracks and with a small nylon plate I had made up there is zero catching. I also use this on a dedicated Hegner finger joint machine. I believe the only reason this is not fitted to all industrial hoses is that it would limit the sale of spare parts hoses. All the best.