AUXITO 194 LED Light Bulb 6000K White 168 2825 W5W T10 Wedge 24-SMD 3014 Chipsets LED Replacement Light Kit Error Free for Car Interior Dome Map Door License Marker Lights, Pack of 10

It’s kind of funny honestly because I usually will buy a pack of these bulbs and I’ll use it on multiple different vehicles. I keep buying this set of bulbs because they’re bright they’re reliable and they look good. They’re great for marker lights and interior lights. They definitely have brightened up my interior for sure. I also installed them in my marker lights that are on the side of my headlights in my Ford F2.50 also I had a 2002 Chevy Silverado. They also looked really good and provided very good light on the side of my truck. To be honest, this is probably the only LED variant of this bulb I would ever buy. I am a cheapo so that should tell you something. If I’m willing to pay for these instead of a few dollars for a normal ball that really means something. I like them they work good they look good. They’re powerful and bright. They’re reliable. I’ve actually never had one burnout on me yet. Funny enough and I’ve been using these bulbs for about five years.

Installed these on my truck and the difference in brightness is night and day! The amber color is crisp, vibrant, and looks fantastic. The build quality feels solid with the aluminum housing, and installation was quick and straight to the point.Just a heads-up for anyone installing them for turn signals: because LEDs draw less power, you’ll want to pick up an LED flasher relay or load resistors to prevent hyperflashing. Once that's set, they work flawlessly. Super happy with the purchase and highly recommend!

Superb so far -- MUCH brighter than the original incandescent bulbs in my 2003 Toyota Tacoma. These cost more than the cheapest LED's at Amazon, but after reading lots of reviews (and Gemini AI), I figure they're worth it. Less vibration-prone, stronger aluminum frames, better light dispersion in reflector housings due to LED's in bulbs located in similar positions to original incandescent filaments. Also, reviewers commonly said the cheapest LED's weren't much brighter than the incandescent bulbs they replaced. I'll try to remember to revise this review if I'm eventually disappointed, but so far, 5 stars.

This is my second set of Auxito LED bulbs and I can’t stress enough how good the build quality is, aluminum construction for better heat dissipation as LEDs tends to get hot, but not only that the LEDs are very bright even with a tinted headlights and taillights like mine. Compatibility fits like how a stock halogen bulbs are making installation easier than ever and a perfect upgrade to your dim stock lights.

Just got these installed in my Gen 4, 2014 Subaru Forester. Combined with a Diode Dynamics LED signal relay they have a nice crisp "blink". They seem quite bright. The rears went right in but the fronts gave me some trouble. At first they only went in about halfway and that was it. Even with moderate pressure they would not go in any further. I tried reversing them but no difference. I figured out they need to be wiggled a bit side to side (along the long axis, not the short one) while pressing in and then they dropped right in.

Strongly recommended, after installing and testing them.The narrative:My Gen2.5 Honda Pilot uses 194 bulbs in the corner marker lights that are integrated with the larger light housings. Part of the annual pre-winter inspect and service protocol is to check for failed bulbs. In my case, the two bulbs in the sides of the rear lamp assemblies had failed. I figured that all the bulbs came from the same time and had endured the same hours of service, so shopped carefully to find some decent LED replacements.These Auxito bulbs fit in the compact spaces in both the front and rear light assemblies. All the regular bulbs I removed had filament metal plated out on the glass envelopes, so were not very bright any more. These bright LED replacements are a very significant improvement to what are the only light sources visible from the side at night. So kind of important if you drive in the dark.I grabbed the 10-pack to upgrade several other places where 194 bulbs are used on the car. The inside door footwell bulbs are looking pretty tired. The rear HMSL needs at least two bulbs replaced too. I hope I have enough... :)One important thing to keep in mind is that these bulbs are polarity-sensitive, while the original bulbs were not. The sockets will accept the bulb base in either of two positions, but only one will actually light the LEDs. After you put the new bulb in the socket for the first time, remember to power that bulb on and make sure it's installed in the correct direction. It might need to be removed and rotated 180º before putting it back in the socket. By my observational math and probability analysis, While I had a 50% chance of getting any one in correctly on the first try, I had a 75% chance of getting each one wrong. Easy to correct if you do so before putting everything back in place on the car.I'm pleased with the installation ease, and with the good fit in the lamp housings. The light levels are great too. The light quality is enough better than the originals that you should plan on replacing all the old bulbs at the same time. The cost for the ten-pack is less than buying a card of four conventional bulbs at the local parts store. Not a tough value decision really.

Much better than almost any other brand for sale on Amazon. These bulbs fit into the 194 miniature wedge bulb sockets used on your recent American Automobile for small marker lights and for your license plate lamps in many vehicles. What I like about these bulbs is that they are much brighter, I would say at least twice as bright, as the incandescent bulb that they replace. That being said there are other brands I purchased and had to return because they were not even as bright as the incandescent bulb. more like an indicator and they gave no light whatsoever other than lighting up. Meanwhile, these bad boys light up, they light up bright, and all you have to do is switch them around to get the right direction for positive and negative. The only other thing you might need to do is my license plate lamps had such a short space before the plastic cover that I actually used a Dremel tool and shaved off 1/16 of an inch off the bottom of each bulb Bass and sanded it and then put it in the socket and it works great. As far as life span, one lasted a really long time and the other one maybe a year, but at that cost I could easily replace the second one. In short these are brighter than the bulbs they replace. The following suggestions I take no responsibility for them but I've also used them in the place of a 168 bulb, and in the place of outdoor low voltage lighting like the old 12 volt AC Intermatic outdoor lighting fixtures.

I like Auxito LEDs. I I run them in my Lexus SC300 headlights, high beams, reverse and lighting which takes the 194 type . Very happy with them. Top Quality in my opinion. Just put in 2 in my 98 4runners headlights. A great difference and less current draw!!

good quality bulb with very good brightness, used this to light up my passat b7 interior lighting highly recommended

منتج جميل وممتاز ودرجة اللون اصفر كهرماني جميل وساطع قوي 100‎%‎ وانسب حل لمبة LED , انصح فيه .

Tengo un mes con ellos, espero duren mucho tiempo. Me gustaron porque son mucho más brillantes que los que lleva de agencia, además de ser blanco puro, mucha mayor iluminación en el interior, se percibe desde fuera del vehículo, los instalé también en la parte de la placa.

Amazing lights. I do recommend because of the brightness and the cost. They’re wicked!

سبق وأن جربت العديد من المنتجات والآسف تعمل لفترة بسيطة فقط ولكن هذا المنتج جدا جدا رائع