WT02 600TVL Ultra Micro AIO Camera and 200mW 5.8GHz Video Transmitter with Clover Antenna for FPV Indoor Racing

I've been using this on my indoor micro drone for about a month, and it's decent for what it is. The image quality is okay; it's clear enough to navigate indoors, but don't expect amazing detail. The signal range is surprisingly good for a 200mW transmitter; I can fly around my apartment without much breakup, but I wouldn't push it too far outside. It's super easy to use—basically plug and play. The size and weight are perfect for a tiny build, and I haven't noticed any significant impact on battery life. Changing channels is simple with the button, and the LED display is clear. The antenna seems to do its job; I haven't had any issues with it. For the price, it's a solid little AIO camera.

Good inexpensive all-in-one camera vtx. Picture quality is very good in well lit conditions, range is solid, and price is the cheapest I've seen so far. My one complaint, and the reason for taking away one star, is because this camera's low light performance leaves a lot to be desired. The sensor isn't the best, and the camera turns very grainy to nearly un-flyable if the area is too dark. If you plan to fly in low light (night flying, indoor using LED gates, dark parking structures, etc), you should get a TX02, or better yet, the classic FX798t. The FX798t is still the best low light performer in the AIO camera category.

Good for the price, however not to be used in low speed applications like rc trucks. Due to power and size, it runs really REALLY warm. does give off slight smell at first use, but went away after electronics burned in. Have no issues with it when it is cooled but picture quality and signal start to deteriorate if it doesn't get some air blown over it to cool it. You won't want to handle the camera while it's on as it's hot enough to burn to the touch when sitting.

Cheap and you get what you pay for. Not great picture quality. Good for a camera you might lose or smash rather then putting your good camera in harms way. Gets very hot very quick fyi.

It’s nice to have a button to change the frequency so connecting to it is pretty easy. Very good for the price. Paid less than $20 for 2 of these. The board does run very hot, not sure why but it works fine. Ran with my 3.7V lipo battery.

Haven't had a chance to range test it yet. Pic is so so but it's a $15 camera and transmitter and it works. If you want a dirt cheap FPV setup this is a hassle free solution.

Not sure what happen had this on a RC Crawler maybe got to hot not sure but was running this on a 1s 3.7v battery on day 1 did a 10 minute test and everything looked and worked fine, 2 day went for a FPV run and it only last me about 5 minutes when all of a sudden I lost Signal and power thought maybe battery died, got home and charged them up still nothing, tested the batteries on other fpv cameras and everything good, but this one no luck.

4 stars due to the heat. Cannot mount with hot glue as it will melt it. BUT, so far so good since I zip tied it to my custom frame. I'm flying around the back side of my Shop which is behind my house while I am sitting on my front porch. . Few lines in the video but that's nothing compared to what I'm asking it to do. It's very clear when flying in front of me. Low profile solid antenna is great for crash up roll overs. I will buy this again without a doubt if I can manage to break the first one.

Good clear picture. Does get hot. Range is pretty darn good. Not sure how long it will last but seems to work good for now.

Excellent value for the money so I picked up 3. Image quality is decent for 20 bucks. The biggest downside is the heat generated when air isn't moving over it. Suitable for putting on a drone or a helicopter where there is a lot of air moving over it (same issue with my Betaflight Cetus X' video transmitter but easily solved by flying soon after powering up). Not suitable for stationary nor slow moving vehicles (pets) or covered air installs without a cooling fan.

Pro: Plug and play. Small. Lightweight Con: Gets hot Antenna bends easily if placed in an awkward position

Smoked as soon as 3.5 vlt battery connected!

Pros: Surprisingly good picture quality, good quality antenna, range through buildings is higher than expected, powered directly from the radio receiver so it's plug and play. Wow, good value. :) Cons: Gets so hot it threatens bare skin and I'm guessing the chips. Maybe they can handle steam generating temperatures but why try? Fix: a squirt of thermal paste + a quarter. No more heat issues but a few grams heavier. This is the only issue with the combination.