RealTruck UnderCover SwingCase Truck Bed Storage Box | SC203D | Fits 2015 - 2025 Ford F-150 Drivers Side (Includes Lightning)

This thing is ingenious! I installed this on my 2013 F150 Lariat SuperCrew with 5.5' box. I do not have a bed liner yet, but this box will work with Bedrugs and sprayed in liners. The instructions say it works with drop in liners, but you have to cut away part of your drop-in liner to accommodate the hinge bracket. When I do decide to install a spray liner, I can simply remove the six bolts and quickly reinstall it. If I decide on a bedrug, I don't have to remove the bracket since the bedrug will simply install over it; I will only need to cut slots for the latching mechanism and hinges. Contrary to popular belief, this will install without removing the factory tie-downs on the 2013 F150 beds (I am sure it will also work on other close years, but I can only speak for the 2013). Here is how: The instructions say to mount the hinge plate with the bottom of it down against the bed. I simply raised it 1 inch above that bed and that caused the bracket to clear the tie-down with a little room to spare to hook in a strap to the tie down ring. Raising it an inch still gives enough clearance at the top of the box to clear the bed rail and any brackets you may have that clamp a topper or tonnneau cover. While the box does block the tie-down, I can still use the tie-down if needed by simply removing the box. The box lifts off the hinges with little effort. The molded plastic construction of the box is very durable. It is made with a thick plastic. The instructions say you cannot store certain chemicals in it, but this is not a problem for me since I store 9 heavy tie-down straps, trailer locks, a trailer receiver, construction knives, rope, and a 10 foot heavy duty jumper cable in mine. It is quite a bit of weight. The latching mechanism is wonderful. If you watch the videos on this product and how easily it latches, you will see how wonderful it will work when you install it on your truck. The swing latch does leave a little room for play when in the locked position. But this has not been a problem on my truck and I do not hear any rattling noise from it on rough roads. I find the size of the box to be perfect. It is not too large to obstruct other uses of the bed, and not too small that you cannot store enough in the box. It is great for storing items that I do not use very often which I do not want to store in the cab of my truck. If I ever need more storage room, I will get another one of these boxes for the passenger side. I already have an under-seat storage bin in the rear of my cab for items I use more frequently. It has two small bins to hold small items. One is permanently mounted in the small, upper area that is over the wheel well. The other is a floating bin that slides across the top. I keep my trailer keys, locks, and wires in this area. The lid does not open enough when the box is swung in the closed position because of the bed rail. However, there really is not a better way to make the lid work unless the box is made smaller. A side door could help, but then items may fall out when the side door is opened, and the hole for a side door would weaken the box. The installation instructions were well written, and there are online videos showing how to install it. Installation was very simple and took very little time; a lot less time than most aftermarket items I have installed on the truck. It is just installing six self-drilling bolts and you are done. I took the time to predrill pilot holes, but this is not necessary. The videos show how to contend with bed side rails that have a curve to them, and it was just simply to mount the bracket a little higher. My 2013 F150 does not have this curve, but I mounted 1 inch higher anyways to clear the tie-down ring. There is a tab on the hinge to lock the box with a padlock. I don't intend to use this since I have a hard tonneau cover and locking tailgate. The lid has a locking latch. Nice, if you don't want the box opened. However, the box can still be lifted off the hinge, so an extra padlock will be needed on the hinge if you don't want the box removed. The swing latch release mechanism works smoothly. Just simply pull the lever with moderate pressure and the box releases. Then swing the box back into place with a moderate push and it locks back in place. This box is everything I expected it to be. I watched the videos about it before purchasing it, so I knew exactly what I was getting. I recommend it for its decent durability and as a good place to store the small items that don't need to be in the cab. UPDATE: I've been using the heck out of this box, and I have a lot of weight stored in it. It still performs wonderful. The latching mechanism did start to bind up a little; however, I just sprayed a little dielectric grease on the moving parts and it works perfect again.

UPDATE: Also now have one of these on my 2022 Raptor and my old review holds true. Only issue was that they included one fewer mounting bolt than they were supposed to. It didn't need to be a special size so I just grabbed a random nut and bolt that fit the hole, from my toolbox and was back in business. Read on for original review... Bought this for my 2018 Raptor after I realized the truck doesn't have much compartmentalized storage space, despite being huge. I paid for a luxury truck so I don't like the idea of things rattling around in the cabin or bed outside of trips to the hardware store. I wanted a good storage solution for small and medium items, but didn't want to sacrifice the floor deck space, that my SuperCrew affords, by adding under-seat storage. TLDR Works great. Highly recommended for anyone who doesn't like their stuff rattling around in the bed or rolling around in the cabin. Works with Ford OEM tonneau cover. INSTALL Installation was a breeze. In theory you could do this all with one adjustable wrench and a T30 torx bit on a scredriver. It makes life easier if you have a wrench set with the 30 degree canted enclosed heads (for reaching inside the tail light cavity to hold nuts in place) and a drill for the torx bit. Once you know what you're doing, you can install this in 15 minutes. No modification to your truck is required. QUALITY The mounting solution is solid and confidence inspiring. The construction of the box itself seems solid, though the use of ABS plastic seems a little cheap for a $200 item (it's plenty thick... I just associate ABS with cheap products). It locks in place firmly and hinges out smoothly, even fully loaded with stuff. The lock setup also works well, and you get a positive click when rotating it to open and close. Based on the simplicity of the unit and parts, it seems like a $150 item, but it's worth $200 for its function. FUNCTION I found there to be more space in it than I expected, which is a plus. I was able to get a large tow tongue, extension cord, ratchet straps, large screwdriver and hex wrench sets, flares, WD-40, mini sledge, and more, and there's room left for a small fire extinguisher and other items. If you installed one on each side of the bed, you'd have a serious amount of storage space that's out of the way and doesn't really impede use of the bed. In the event that you need to remove the SwingCase to maximize bed space, it's as simple as releasing the latch and lifting. Takes 5 seconds. The SwingCase locks up nice and firm in its stowed position, and they mounted the release lever offset-inboard, so when you pull it you're applying a torque that naturally swings the case out. It can't actually swing a full 180 degrees because it runs into the bed support cable, but it swings plenty far to be convenient. USE WITH FORD TONNEAU Note for those with an OEM Ford tonneau cover... I was worried the SwingCase would get in the way of the latch lever that holds the tonneau cover down. Turns our Ford's design allows the lever to move out of the way under its spring tension, while still keeping the cover fastened down. It even adds a little spring tension against the SwingCase, helping it swing out when released. No issues here.

I bought both driver's side and passenger side. Installation of both took about an hour (after finding a video showing how to do it) Pros: Lightweight Removable (if you're worried about security, just for convenience, or you need the space for hauling bulk items). Relatively easy to install, but the provided instructions are severely lacking. Find a YouTube video and you'll be fine. It's not complicated, but does take more than the 10 mins they advertise. Latching mechanism seems to be solid, so it stays in place. The removable upper tray is a nice feature for small items. If you have tie-down cleats in place, this can be mounted directly over them. (uses the same bolts). Cleats will not interfere with the bins when they are latched. This means you can remove the bins and still use the cleats. You can add small padlocks to slow down a would-be thief from removing the bins from your truck. Cons: If you have OEM bed lights, they will be 75% covered, and it's very hard to reach the switch (when the bins are in their latched position). If you have a bed cover and do not partially retract it, the lids to the bins will not open all the way, because they cannot swing out far enough (they run into the tailgate support cables). Inadequate installation instructions. The manufacturer should put a video on their website. The provided hinge lock is a good idea, but it's just plastic. It might slow someone down, but could probably be snapped out with a large screwdriver. If you have a drop-in bed liner (like I do), you may have to trim it where the brackets attach to your truck. Be aware that if you put a lot of heavy, loose items in them, and then hit speedbumps, potholes, rough pavement, etc., those items may go airborne inside the bins. When they do, they slam back into the bottom of the bin. That will put stress on the bin, hinges and latch.

Easy install other than the bolts they give you don’t hold torque very well I snapped a head and had to extract and go to a hardware store used loctite and low torque on the rest

I got 2 for both sides of my 2023 Ford F150. They are easy to install. I recommend only finger tight the 3 mounting bolts and then finish the install. Once you latch the tool box then tighten the 3 bolts. It lines up a lot better.

Took 5-minutes to install on 2014 F-150 XLT Supercrew. There's not a great deal of space for storage, but it will definitely hold everything you would probably require if you were broken down or had a flat. I AGREE with other reviews regarding the price being too high for the quality; e.g thick plastic material. However, I knew this when I made the purchase and have no regrets! Probably should have bought 2; one for each side, but the price was tough to justify. OVERALL ..... I'd give it an B, but only due to the price tag!

Fits great!

I really like these SwingCases, BUT: 1: The SwingCases DO stick out past the wheel wells, not as indicated in the description of SwingCase models SC203P and SC203D, for my 2015 Ford F-150 4x4 with a 5.5 ft. bed, which I purchased at Amazon. As suggested on Amazon, I checked the Undercover website to make sure I was getting the correct model SwingCases. Here is a quote directly cut and pasted from their website: "The SwingCase allows full use of the truck bed, and swings your gear right out to you." Not a fully true statement & the animation, right next to the above statement, shows the case swung shut up against the side of the bed and NOT being wider than the wheel well hump in the bed. Very misleading!! This difference will prevent me from driving my Honda ATV into my truck bed without removing at least 1 of the SwingCases. (I hope only 1 but I might have to remove both.) 2. I ordered both the driver's and passenger's side SwingCases, but I ordered them at different times, close together, but different times. I have found out all the keys ( 2 keys/ case) fit both SwingCases. This is very disturbing, as now I can’t trust that anyone with one of these SwingCases or even similar keys to something else, will be able to open my locked SwingCases with their keys. I would have thought, for the price Undercover charges, they could have included unique locks, not these really cheap ones. A good latch, with unique lock is only about $6-$10 for a set of 4 ea. with matching keys/locks, so I don't understand how saving a few cents, or a buck, helps their reputation. Very disappointed. I will have to find, buy and replace the latches with ones that have good, unique, locks before I can feel safe to store item in the SwingCases. My SwingCases might be matching locks, but Undercover or Amazon didn't know to do that for me when I ordered them, so I believe all the SwingCases locks are matching locks/keys. I must admit, other than these two major problems, the SwingCases are fantastic for removable storage boxes and work great. They were really easy to install, and didn’t require drilling any new holes in my truck. Just wish they were more honest in their description and not so cheap on the locks. I'll keep them and I will recommend them. Just my 4-bits worth :)

I purchased the passenger side box for my 2012 F-150. The box arrived on time and undamaged. Install was actually quite easy and probably only took me about 15 minutes, mostly because I double check everything. I have a spray in bed liner and this didn't create any installation issues or extra cutting. The video on Amazon shows an older box model as mine had some clear improvements to the hinges and the swing mechanism. The pictures are closer to what the box looks like now. Also, there is now a hinge lock included which prevents the box from being lifted and stolen. This is keyed to the lid lock so quite convenient. Both locks are really what some would call enough to "keep honest people honest", but I didn't expect metal armour. You can still add a padlock for extra protection. There are copies of this item also available, but they were roughly the same price. I chose to get the branded item and this was a great quality decision. . The box has lots of space, more than I expected and I am very pleased with this purchase!

This is the second one I bought. I started with the driver side unit and liked how it worked so much that I figured I'd go for the passenger side one. One carries my tools, while the other carries my hiking gear. Love how it really does make use of the space that isn't used. I like the fact that you can remove them as well. I had to put a piece of plywood into the back, but with both swing cases, it would have been awkward. I removed one and it fit perfectly. As one user commented, it would be nice if there was a way to lock it in place when it swings out, but it's not the end of the world. I have another toolkit in the back and I just use it as a backstop. Easy hack for an otherwise great product.

Buen producto!! El manual no se entiendo muy bien pero es un buen producto

This case is awesome! No more tools rolling around in the cab. It was easy to install. If you have an F150 you must flip the tie down point upside down to install the case. My truck had a spray in bed liner so I had to cut the bedliner around the tie down point to flip it.

Muy mal producto, el plastico en si es de muy baja calidad ademas se rompio al mes de uso el candado para abrir y cerrar la caja, tambien se le salen los tornillos donde se sujeta y no hay como reclamar garantia.