VEVOR 28 Inch Adjustable Furniture Legs, Square Reinforced Steel Office Table Legs Set of 2 for DIY, Max Load 1000 lbs Heavy Duty Desk Legs, Quick Instalation & Rich Accessories Legs Black

These were super easy to install! They came packaged nicely to protect the coating! The legs were individually wrapped in plastic inside the box to avoid scratches. They come with adjustable little knobs that screw into the base if you need to level the table, but you don't have to use them. They have held up really well so far for almost a year (in an industrial setting for training tables) and are easy to wipe clean! The color has not changed and haven't had any scratches yet. Also has pre-drilled holes that make it easy to mark and drill. It did not come with screws for the table base (you'll need a table base separately), which makes sense because the screw length would depend on the table top depth. It would be helpful, though, if they told you the gauge of screw you'd need. I did have to buy several different packages to see what would fit. I ended up using 6' butcher block table tops that we got on clearance at Home Depot for $30 each! I did use a drill to pre-drill my holes into the base, and would recommend that! Again the legs have holes pre-drilled for you, so it works as a really nice guide for your table top! Would recommend 5/5!

perfect for a butcher block desk. very well made. leveling feet are high quality.

I use these along with a slab of butcher block to build myself a double office desk, I purchased two sets of these legs and they worked perfectly! Super sturdy and they look great.

Legs worked great for a custom computer desk I am making for my son out of dark walnut. Only reason they received a 4 star is the screws are cheap. We upgraded to a better quality screw that will hold up better.

I just received these yesterday and immediately used them to build an 8 foot butcher block desk for my streaming and gaming setup. I was honestly impressed with how solid they are. Installation was straightforward, and once everything was assembled, the desk felt incredibly sturdy. I'm supporting a heavy butcher block top along with multiple monitors, monitor arms, a desktop PC, audio equipment, cameras, and other streaming gear, and these legs don't seem to struggle with the weight at all. There's no noticeable flex or wobble, which was one of my biggest concerns before ordering. The finish looks great too. The powder coating is even, the welds look clean, and they feel like they're built to last. They have a nice modern industrial look that worked perfectly for the desk I had in mind. Obviously I can't speak to long term durability since I've only had them for a day, but my first impression is excellent. If they continue holding up the way they have so far, I'll be very happy with this purchase. Based on my experience, I'd definitely recommend them to anyone building a custom desk or table.

Highly recommended. Built like a tank. I don't know if the 1000 pound weight capacity is legit, but I would have no problem putting several hundred pounds on these legs. It is rectangular steel that seems structurally than other table legs I've ever had. I bought these to use under a 4x3 tabletop of butcher block that weighs over 60 lbs and have no concerns whatsoever about the capacity. I like that instead of 4 individual legs, it is two sets of two with a steel cross bar that provides additional support across the entire depth of the table. No damage from shipping despite the box being dinged a bit. It was well cushioned with bubble wrap and custom cardboard inserts. One note about the feet - if you use them, make sure to use both nuts. Because I wanted this at the lowest height, I installed the first foot with a single nut. When screwing this in, one nut is not going to allow you to tighten the final few turns of the bolt because the foot hole in the base is a rubber/plastic material that will strip. It's hard to explain in orders but just trust me, use two nuts on each leg. Plus, if you want to raise the leg to increase the height I think the second nut will help with this. You'll need two 17mm wrenches or adjustable ones to bighorn the bolts. I won't be using the included bolts to attach the legs to my tabletop based on some other user's complaints. I use my own good quality screws and bolts because that's ones that come with many items strip or break too often. I put a couple of 1.5" stick on felt pads on my feet to make sliding the table for cleaning scooter on my laminate floors. 2.5" round pads would fit better so I ordered some from AMZ. I expect I'll be very pleased with the aesthetics of this once I fully assemble my table based on the other reviews and pictures. Ps. After assembly with a 60lb 48”x25” butcher block top these legs look great and are rock solid and stable. I ended up removing the feet and putting four stick on felt pads on each leg because the feet made the table height slightly too high. With no feet attached the height is perfect. See 3rd and 4th pictures.

Great item. Easy to construct my craft table using these legs you will not be sorry if you get them

I wanted a skinny but long enough table to fit 2 chairs but not bar height to use less space on the porch. I couldn’t find what I wanted so I ordered these legs & made it. I love the look of the legs & that they were adjustable & solid. They came with the hardware. I would recommend.

Wunder schöne Tischbeine Preis-Leistung top

Excellente qualité et bien emballé, les pieds m'ont permis d'obtenir une hauteur sous le plateau de la table de max 75cm, à noter que moyennant le changement des 4 écrous par des plus long de même diamètre (bien sûr), on peut encore légèrement augmenter cette hauteur. Le plateau de ma table mesure 60x150 et les pieds ont été placés à 2cm du bord de chaque côté.

Están muy bien y llegaron muy rápido

Good quality and fast delivery Thanks

Vraiment de la super qualité, très stable. Super rendu