NB SUPERMAX 2.0

Great value, works well with keeping the vram on my rtx 2060 cool. It lasted until i upgraded, the thickness is correct.

I replaced the pads on my Zotac Trinity OC RTX 3090 as well as the thermal paste due to really high temperatures.I used Gelid Pads on the die side, and NAB Pads on the backplate side. (Pretty sure they come from the same factory)The pads worked out greatI would however not recommend 3.0mm on the backplate side for this specific card, the original pads are only 2.0mm. 2.5mm should be better. The 3.0mm bend the plate a little more than I would like. Though this is not an issue with these pads, this is simply due to a lack of information online.See the MAX temps in the photos.The Temperatures are after running MSI Kombustor for 10 Minutes.Photo 1: Before Thermal Paste and Pad ReplacementPhoto 2: After Thermal Paste (ID Cooling) and Before Pad ReplacementPhoto 3: After Thermal Paste (TGK) and Pad Replacement

Not bad but it’s small.

I bought a used graphic card, and while it was in great shape, this card is known for running warm. I brought it home, and started running benchmarks. On Time spy, it would peak at 87C, which is too high. I bought these pads, and reposted the gpu as well. The temperatures went down to 71C peak, and increased it score as well.I will buy these pads from now on. They are amazing!!!!

I'm absolutely shocked at how well this worked. I wasn't expecting a simple thermal pad replacement to make this much of a difference, but figured it was worth a shot. I'm glad I took the chance because it totally fixed the issue. The VRAM temperature was heating up to between 108-110 C, which is way too hot. Once I replaced it with a 2mm pad, I stacked 1mm pads, the temperature dropped down to around 88 C. When I got in there to replace the pads, it looked like the factory pads had poor contact, which can definitely account for the overheating. Replacing the pads was a breeze. I'm glad I did this because it will definitely extend the life of my expensive graphic card.

Put these on my 3090 to help with crazy VRAM temps after seeing videos about potential issues. I went to a cheaper brand first and they dropped temps 4-6 degrees C over factory, awesome. Then I watched a video to see what brands are best, and this one came out close to the top relative to what they cost. I swapped to these and dropped another further 2-3 degrees C. My suggestion is to buy a better brand up front, and get the overall benefit of better performance without buying twice. Small for the peace of mind that your memory isn't going to cook itself without going full water cooling.

product was harder than most thermal pads I've purchased, had small rips on the sides, not a flexible thermal pad either.

I have a rtx 3080 Ti founders edition, and memory junctions temps maxed out at 102 degrees before. I saw these pads mentioned in a youtube review where they installed a couple of different brands of thermal pad in the same gpu and compared the temps. The NAB pads did slightly better in the review than the GELID pads that everybody raves about. I installed 1.5mm pads on the front of the card and 2mm on the back. My memory temps now max out at 78-80 degrees, so I am quite happy.Bonus is that you get more pad in the package than the GELIDs, and they cost less too.