PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gold

This PETG filament has very good quality. It feeds smoothly, adheres well to the print bed, and results in strong, reliable final parts with minimal stringing. The dimensional accuracy is excellent, leading to consistent and hassle-free prints every time

Having only recently got into 3D printing with a Bambu Labs printer, I found their lack of PETG stock frustrating and looked elsewhere. Finally settled on Hatchbox due to reviews, and I'm glad I did. It's now become my go-to filament brand. Great colours, prints really well (even on standard Bambu Lab) presets and even better once dialled in. Spools are neatly wound, and as they're still plastic they work fine in the Bambu P1S AMS.

Printing using an Ender 5 Pro in an enclosure, stock hotend & PEI sheet, the adhesion is really good but not too good! (just need to pop the PEI sheet off and flex to release print), the quality is pretty good, some stringing but really depends on the printer & setup/config, colour comes out really well, very similar to the purple colour the joker wears in Batman 1989!

Freshly opened packet and it won't stick together. I dried it for 5 hours and exactly the same. Im printing at 22vfr. (volumetric flow rate) Ive had to drop this to 4vfr to get the filament to stick, so its not on par with other PETG's. it does now stick - so be warned its a 50mm/s print speed filament. Really disappointed, considering the cost. I used some similarly priced petg filament after this and it printed perfectly at the intended high speeds, so it's ruled out the printer causing the issue. Update - Hatchbox support dealt with the issue and I am now satisfied with the result. Great customer support!

It's good value filament with a good range of colours that works but like all filaments only if you calibrate for each because they're all slightly different. For PETG and PLA I mostly stick to Hatchbox to save making another profile. I've never had any problem with bed adhesion on my textured plate so can't comment. I just wipe it with a microfibre cloth and 99% IPA before and after each print. I've done 100s of prints and the pate looks like new after a one year plus. I use PLA, PETG and TPU.

Purchased it with a 20% discount so good value too. It would be a little expensive without the discount though. Good that it comes on plastic spools as I need these for my Bambu Labs AMS.

Worked wonders for the prints I've been wanting to do..

nice pla used it in my bambulab machine no issues whatsoever

Anfangs vorweg, da dies mein erstes PETG-Filament ist, kann ich keine Vergleiche zu anderen ziehen. Die Spule wird vakuumiert und in einer mit den Infos zum Filament bedruckten Schachtel geliefert, wie sich das gehört. Die Farbe ist sehr schön intensiv, auch die glänzende Optik nach dem Druck empfand ich als sehr anprechend. Sehr gute Flexibilität im Vergleich zu ABS oder PLA, einfach zu drucken und der ideale Abstand vom Hotend zum Druckbett lässt sich aufgrund des Glanzes sehr gut beurteilen und dementsprechend einstellen. Ich verarbeite es bei 240°C Hotend-Temperatur und 55°C am Druckbett. Absolute Empfehlung, 5 Sterne!

Erfordert aufmerksames Einstellen der Parameter. Bevorzugt nur ein Objekt auf einmal drucken, da starkes Stringing auftritt. Farbqualität ist gut, daher vergebe ich trotzdem 3 Sterne.

Nachdem ich jetzt gut 300g davon verdruckt habe, kann ich sagen, dass es, sobald man mal die Details heraussen hat, es auch ordentlich funktioniert. Drucktemperaturen über 240°C führen bei mir zu relativ starker Fadenbildung, alles über 250°C führ quasi sofort zum Clogging. Das Filament ist relativ weich, d.h. es kann bei der Zuführung durchaus mal Probleme geben - v.a. wenn das Material sehr langsam gedruckt wird. Schnelle Drucke bei 0.3mm Schichtdicke werden sehr gut, feine Drucke mit unter 0.25mm werden nur was wenn das Heatbed optimal ausgerichtet ist, streift die Nozzle irgendwann an Material führt es sehr schnell zu Clogging. Heatbed auf 58°C, ohne Raft auf Hartpapier mit etwas Klebestick funktioniert einwandfrei. Das Endprodukt ist PETG typisch etwas weicher als ABS.

Good quality filament — I always trust Hatchbox for 3D printing. This PETG has a solid black appearance, a normal PETG texture, and it’s not transparent, exactly as expected. Prints well and offers great value for the money.

This filament has worked really well for me. I print at 330C with the bed at 70C, and it always sticks great to BuildTak and bare tempered glass. So I don't know what the other reviewer was complaining about, maybe they weren't using good quality build plate material. Also I love the colour, it's brighter orange than the Hatchbox PLA. I'm using it for all the printed parts for the printer I'm building, looks awesome against the black anodized V-Slot frame.